"> {literal} {/literal}
Voss Musikk
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Ashdown RM 500-EVO II 500 W Head

Art.nr: 588210
9.649,-
Antall:
Ikkje på lager, ca. 4-7 dagers leveringstid, så lenge varen er på lager hos leverandør.
ROOTMASTER-500-EVO II

For those seeking Ashdown tone, power and reliability without the weight the RM-500 EVO II is the solution. Perfect for small, medium and even larger shows when paired with the right cabinets.

Weighing in at just 2.1KG(4.6lbs) but boasting 500 watts of power, class leading quality and features. The Rootmaster EVO II range also now comes equipped with an on-board headphone preamp to allow for silent practice, which doubles up these gig-ready amplifiers as handy practice devices. 

The pre amp includes a passive and active input jack socket for use with high and low output instruments, this sets a clear signal path to the input control enabling you to fine tune your input level using the trademark Ashdown VU meter. With the signal at its optimal level, you then hit the rich features designed enhance your tone, such as the shape button, 5-band EQ and on-board compressor. The drive control, as always delivers a delectable valve emulated over-drive, whilst the sub harmonic controls add further fatness to your tone - both can be foot-switched via an FS 2 foot-switch (sold separately).

Rootmaster EVO II heads also features a handy mute button. What’s even cooler is when switched to mute, the trademark Ashdown Engineering VU meter changes from orange to cool blue – creating the perfect on stage mood lighting between sets.

Matt anodised alloy front panel
Ashdown have upgraded the amp’s front panel with a matt anodised alloy finish, replacing the previous polished stainless steel. This simple, yet observant modification makes reading your amp settings that bit easier when placed under bright stage lighting.

No more reflective surfaces.

Simple, powerful EQ
The Rootmaster EVO series’ pre amp now includes a passive and active input jack socket for use with high and low output instruments. The five- band rotary tone controls act with surgical precision to provide total control over your sound, while a shape switch instantly dials you in to a classic Ashdown tone setting, straight from the world-famous ABM.

One-knob Compression
Instantly adding warmth and body to your tone, this simple to use, great sounding compressor delivers a powerful, even sound to make sure your bass is smooth as silk and will fill out any mix.

Overdrive & Sub
With footswitchable flexibility, our tube-emulated overdrive can take your core bass sound and push it into warm overdrive through to distorted filth whenever you need to add extra grind and girth to your tone.

Bringing extra depth and definition to your bass parts, the Sub-Harmonic Generator lets you dial in a sub-octave and kick it in via footswitch whenever you need the extra depth for those super-heavy Godzilla moments.

Totally connected
If you want to use your favourite pedals or multi-effects, you’ll find send and return sockets on the back panel, along with a DI output for direct injection into the PA mixer or recording console and a Line Input (with front panel level control) so you can jam along with a backing track in rehearsal.

A pair of Neutrik Jack/Speakon sockets with a minimum 4 ohm load provides flexible partnering options with a dedicated range of Rootmaster EVO cabinets. The Rootmaster 500 EVO II can be used to power a single 8 ohm cabinet, a pair of 8 ohm cabinets or a single 4 ohm cabinet.

Headphone Output
The Rootmaster EVO II range now comes equipped with an on-board headphone preamp to allow for silent practice,which doubles up these gig-ready amplifiers as handy practice devices. The headphone preamp maximises the full sound potential of your headphones, so now your in ear sound can match the quality of your stage sound… given you have the correct (Meters Music) headphones, of course!

Specifications
Power Output	500 Watts
Power Requirement	115-230 Volts
Speaker Outputs	2 x Neutrik Speakon/Jack outputs
Frequency Response	-3dB @ 17Hz und 30KHz
High Instrument Input	Impedance 3.9m Ohms, input range 150mV
Low Instrument Input	Impedance 10k Ohms, input range 300mV - 40V p-p
Line Input	Impedance 22k Ohms, input level 0dBu nominal
DI Output	600 Ohm balanced, Level 0dBu nominal
Tuner Output	Impedance 22k Ohms, Level 0dBu nominal
Impedance	Minimum 4 Ohms
Signal to noise	Better than 80dB (EQ flat)
EQ	Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +
Effects Send	Impedance 22k Ohm, Level 0dBu nominal
Effects Return	Impedance 22k Ohms, Input Level 0dBu Nominal
Distortion	Less than 0.5% THD
H x W x D (mm)	86 x 314 x 235
Weight (kg/lbs)	2.6/5.5

https://ashdownmusic.com/

Kommentarer

Share |
Ashdown

Ashdown


Better Bass Since '97
The Ashdown story starts in 1997, but even in those early days, company founder Mark Gooday could've already easily been described as a bass amp veteran. Having already been one of the driving forces behind another leading UK manufacturer of bass amplification, Gooday had racked up awards and plaudits for his pioneering approach and now had his sights set on even loftier aspirations.

So, it's 1997, and armed with a wealth of experience and headful of new ideas, Gooday kickstarts Ashdown Engineering to life with a simple vision – to build and 'engineer' a better bass amp.

With a nous for innovation and a flair for design, many would've jumped straight in, but Gooday was smart enough to first court feedback from some of the world's most respected bass players, including John Entwistle (The Who), Mark King (Level 42) and JJ Burnel (The Stranglers).

Inspired by the comments from these trusted advisors, Gooday focused his efforts on designing a new kind of bass amp, where superior tone was matched by unrivalled power and tour-grade performance in a truly engineered, uniquely-styled package. 

Alternative produkter

Kunder som så på dette så også på

Relaterte produkter

Trykk ENTER for å søke