Adam Audio T10S Aktiv ...

5.695,-

The T10S is a powerful yet compact active subwoofer, designed to extend the bass response of any nearfield studio monitor. However, the subwoofer’s performance, features and connectivity are engineered specifically to complement ADAM Audio’s T5V and T7V speakers. Equipped with a down-firing 10˝ woofer and a 130 W Class-D amplifier, the T10S’ frequency response ranges from 28 Hz to 120 Hz and offers an impressive max. SPL of 104 dB. An internal adjustable two-channel crossover allows calibration of the bass signal and provides optimal performance of the total system. The options at the rear of the subwoofer allow for varied adjustments which compensate for room acoustics or they offer more control for satellites attached. While reciting the T Series design language, the T10S is one of the most compact subwoofers in its class, which allows it to be easily integrated in any studio environment. The acoustic performance was optimized by four high grade flexible rubber feet that prevent the sound from exciting the floor and a spacious rear facing bass reflex port for an optimized airflow. Amp. Power RMS: 130 W Frequency Response: 28 Hz - 120 Hz Max. SPL at 1 m: ≥104 dB Optimized for T Series studio monitors

Kali Audio WS-12 V2 Aktiv Sub ...

9.990,-

Kali Audio WS-12 V2 Kali Audio's WS-12 V2 is a 1000 W, 12-inch subwoofer for studio and live use. With a frequency response down to 23 Hz, it is an authoritative studio subwoofer. The 1000 W power amp allows the WS-12 to be used for bass management in 5.1 systems, and one WS-12 will be sufficient when using up to 5 of Kali’s IN-8s. An 18mm wooden enclosure means that the WS-12 is rugged and portable, making it a perfect solution for use in small PA systems. _____ WS-12 V2 är Kali Audios nya 12-tums subwoofer för studio- och livebruk. Med ett utökat frekvensomfång från 23 Hz -200 Hz och slutsteg på 1000 W är WS-12 är perfekt för Bas Management i Dolby Atmos eller 5.1-system, och en WS-12 räcker när man använder upp till 5 av Kalis IN-8. WS-12 V2 är redo för liveanvändning. Med ett 18 mm plywoodhölje, ett stålgaller och en robust, strukturerad beläggning, kan den stå emot stlitage från scenarbete och transport med mera. _____ 2nd Wave Kali Audio's WS-12 V2 is a 1000 W, 12-inch subwoofer for studio and live use. With a frequency response down to 23 Hz, it is an authoritative studio subwoofer. The 1000 W power amp allows the WS-12 to be used for bass management in 5.1 systems, and one WS-12 will be sufficient when using up to 5 of Kali’s IN-8s. The WS-12 is the only subwoofer that can pull double duty as a studio and live subwoofer. An 18mm wooden enclosure means that the WS-12 V2is rugged and portable, making it a perfect solution for use in small PA systems. The WS-12 V2 is specifically designed to fit into small passenger cars, making it easy to carry to and from gigs. V2 features several improvements over the original version. Signal-to-noise on the crossover is improved by more than 6 dB. The V2 also features an M10 pole cup, allowing users to attach a pole for mounting full-range PA speakers. Unlimited Power The WS-12 V2 uses a Class D power amp capable of 1000 W peak power and 500 W continuous power. This allows the WS-12 V2 to play up to 123 dB Max SPL; enough SPL to provide LFE for at least a 5.1 system of IN-8s. In many listening environments, 1-2 WS-12s can easily handle both LFE and bass management for a full Atmos system. Dolby Compliant The WS-12 is fully compliant with Dolby’s specifications for subwoofers to be used for Atmos monitoring for both music and picture. Low Noise Port Tube On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as "chuffing," or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end. The port tube on the WS-12 V2 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise. Selectable crossover The WS-12 V2 has a user-selectable crossover with 5 Hz steps from 50 to 110 Hz. This allows users to integrate the WS-12 with any pair of stereo speakers, including studio monitors, hifi speakers, and PA speakers. Most studio monitors, including all models offered by Kali Audio, will work best with the 80 Hz setting. Polarity Inversion. The polarity reverse function on the WS-12 allows you to flip polarity by 180 degrees to better integrate with the full range speakers and the room. Road-Ready The WS-12 V2 is ready for live use. With an 18-mm plywood enclosure, a steel grille, and a rugged, textured coating, it can stand up to stage duty and the abuses of being transported night in and night out. Steel handles make the WS-12 easy to carry, and its dimensions are specifically tailored to fit into the trunk of a Toyota Corolla, meaning that it can be easily transported in most passenger cars.

Kali Audio WS-6.2 Aktiv Sub ...

6.590,-

WS-6.2 The WS-6.2 is a studio subwoofer with 2 x 6.5-Inch horizontally opposed woofers. Taking up less than half the space of comparably performing subwoofers, it is ideal for stereo mix setups where space is at a premium. It is capable of 120 dB max SPL and 27 Hz lower frequency response. WS-6.2 er en liten smidig 1000 watt studiosubwoofer med 2 x 6,5-tommers basshøyttalere som passar perfekt til Kali Audios LP- og IN-serie. WS-6.2 har ett 80 Hz crossover-filter, LFE-mode eller kan anvendes med ett eksternt delefilter. Polariteten kan også snues om det behøves. Med Kali Audios WS-6.2 får du en klar, tydelig og kraftfull bass med minimal forvrenging. WS-6.2 kommer med stereo RCA, XLR/TRS innganger og stereo XLR ut. Mulighet for bypass av sub med footswitch finnes også. The WS-6.2 is a studio subwoofer with 2 x 6.5-Inch high excursion woofers. Designed to be both powerful and small, the WS-6.2 takes up less than half as much space as comparably performing subwoofers. Despite its diminutive form factor, it is capable of 120 dB max SPL and 27 Hz lower frequency response. The woofers are horizontally opposed, meaning that there is no net vibration from the subwoofer. A built-in 80 Hz high-passed output makes it ideal for pairing with most popular studio monitors, including Kali’s LP- and IN-Series monitors. A footswitch jack allows users to bypass both the sub and the crossover so they can hear their mix on their full range speakers. Footswitches are sold separately, but a number of inexpensive options are available at every music retailer. In addition to the 80 Hz crossover, the subwoofer can be set for LFE mode or be used with an external crossover. Polarity may also be reversed if necessary. Like all of Kali’s speakers, the WS-6.2 uses a unique port tube that virtually eliminates chuffing and port compression, allowing for clear, powerful bass with minimal distortion.

KRK S10.4 Powered Subwoofer

5.399,-

KRK S10.4 Powered Subwoofer 160watt active subwoofer featuring 10" glass aramid composite woofer The S10.4 powered studio subwoofer builds upon KRK’s legacy for sonic accuracy and performance. The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control and punch. The four-position selectable crossover makes it easy to adjust the subwoofer setting to your existing monitors. Pairing the S10.4 with KRK or another studio monitors delivers an optimized listening and mixing experience with extended low end, while the exclusive bypass-control feature provides full range audio to the monitors without switching off the subwoofer. KRK's S10.4 subwoofer doesn’t just deliver precise bass and a rich feature set: it’s the next dimension in subwoofer performance. S10.4 Features 10" glass aramid composite woofer Bass extension to 28Hz with a max SPL of 117 dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Curved design with front-firing bass port for placement flexibility Powerful, lightweight Class D amplification Optimized four-position crossover control Universal connectivity: XLR, 1/4" TRS, and RCA inputs and outputs Polarity and input sensitivity controls All-steel grill and 15 mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loops       Configuration   Front Loaded, Vented Subwoofer System Type   Active Subwoofer Low-Frequency   10" Glass Aramid Composite Woofer Frequency Response   34Hz - 130Hz Max Peak SPL   117.2 dB Amplifier   Class D Power Output (Continous)   160 Watts @ 1% THD+N @ 44Hz Signal to Noise Ratio   92 dB Amplifier Distortion (THD + N)   ≤ 0.12% @-3dB Of Max Power Output 31Hz-110Hz Input Impedance   9.4 KΩ Balanced, 9.2 KΩ Unbalanced Ground Lift   On/Off Low Pass Frequency   28Hz-156Hz HPF Bypass   With Footswitch Only Footswitch   Optional Phase   0 or 180 Degrees System Volume   -30 dB to +6 dB Indicators   Power/Standby, Sub On/Mute, HPF Bypass Input Connectors   XLR L/R, 1/4" TRS L/R, RCA L/R, 1/4" Footswitch LFE Input   N/A Output Connectors   XLR L/R, 1/4" TRS L/R, RCA L/R AC Power Input   100VAC-240VAC Enclosure   15mm Reinforced MDF Finish   Black Vinyl Wrap Grill   Steel Perf Dimensions (H x W x D)   15" (382mm) X 14" (355mm) X 16.06" (408mm) Weight   34.5 lb. (15.6 kg)

KRK S12.4 Powered Subwoofer

8.699,-

KRK S12.4 Powered Subwoofer 220watt active subwoofer featuring 12" woven kevlar woofer The S12.4 powered studio subwoofer builds upon KRK’s legacy for sonic accuracy and stellar performance. The custom-made, Kevlar® woofer delivers ultra-tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control, and punch. The four-position selectable crossover lets you adjust the subwoofer setting easily to your existing monitors. Pairing the S12.4 with KRK or another studio monitor delivers an optimized listening and mixing experience with extended low end, while the exclusive bypass-control feature provides full range audio to the monitors without switching off the subwoofer. The powerful S12.4 subwoofer doesn’t just deliver precise, ultra-low bass and a rich feature set: it’s the next dimension in subwoofer performance. S12.4 Features 12" Kevlar® Composite Woofer Bass extension to 26Hz with a max SPL of 119 dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Curved design with front-firing bass port for placement flexibility Powerful, lightweight Class D amplification Optimized four-position crossover control Universal connectivity: XLR, 1/4" TRS, and RCA inputs and outputs Polarity and input sensitivity controls All-steel grill and 18 mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loops     Configuration Front Loaded, Vented Subwoofer System Type Active Subwoofer Low-Frequency 12" Woven Kevlar® Woofer Frequency Response 32Hz - 139Hz Max Peak SPL 119.9 dB Amplifier Class D Power Output (Continous) 220 Watts @ 1% THD+N @ 44Hz Signal to Noise Ratio 92 dB Amplifier Distortion (THD + N) ≤ 0.3% @-3dB Of Max Power Output 29Hz-97Hz Input Impedance 9.4 KΩ Balanced, 9.2 KΩ Unbalanced Ground Lift On/Off Low Pass Frequency 26Hz-130Hz HPF Bypass With Footswitch Only Footswitch Optional Phase 0 or 180 Degrees System Volume -30 dB to +6 dB Indicators Power/Standby, Sub On/Mute, HPF Bypass Input Connectors XLR L/R, 1/4" TRS L/R, RCA L/R, 1/4" Footswitch LFE Input Balanced TRS Output Connectors XLR L/R, 1/4" TRS L/R, RCA L/R AC Power Input Selectable 110V-120V / 220V0240V Enclosure 18mm Reinforced MDF Finish Black Vinyl Wrap Grill Steel Perf Dimensions (H x W x D) 18.11" (460mm) X 15.94" (405mm) X 22.64" (575mm) Weight 66.5 lb. (30.1 kg)

KRK S8.4 Powered Subwoofer

3.999,-

KRK S8.4 Powered Subwoofer 109watt active subwoofer featuring 8" glass aramid composite woofer The S8.4 powered studio subwoofer builds upon KRK’s legacy for sonic accuracy in a compact form factor. The custom-voiced, glass-aramid woofer delivers tight, defined bass, while the Class-D power amplifier dramatically increases transient response, control and punch. The four-position selectable crossover lets you adjust the subwoofer setting easily to your existing monitors. Pairing the S8.4 subwoofer with KRK or another studio monitor delivers an optimized mixing and listening experience with extended low end, while the exclusive bypass-control feature provides full range audio to the monitors without switching off the subwoofer. KRK’s S8.4 subwoofer doesn’t just deliver precise bass and a rich feature set: it’s the next dimension in subwoofer performance. S8.4 Features 8" glass aramid composite woofer Bass extension to 30Hz with a max SPL of 112 dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Curved design with front-firing bass port for placement flexibility Powerful, lightweight Class D amplification Optimized four-position crossover control Universal connectivity: XLR, 1/4" TRS, and RCA inputs and outputs Polarity and input sensitivity controls All-steel grill and 15 mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loops Configuration Front Loaded, Vented Subwoofer System Type Active Subwoofer Low-Frequency 8" Glass Aramid Composite Woofer Frequency Response 35Hz - 133Hz Max Peak SPL 112.8 dB Amplifier Class D Power Output (Continous) 109 Watts @ 1% THD+N @ 46Hz Signal to Noise Ratio 92 dB Amplifier Distortion (THD + N) ≤ 0.1% @-3dB Of Max Power Output 35Hz-133Hz Input Impedance 9.4 KΩ Balanced, 9.2 KΩ Unbalanced Ground Lift On/Off Low Pass Frequency 30Hz-205Hz HPF Bypass With Footswitch Only Footswitch Optional Phase 0 or 180 Degrees System Volume -30 dB to +6 dB Indicators Power/Standby, Sub On/Mute, HPF Bypass Input Connectors XLR L/R, 1/4" TRS L/R, RCA L/R, 1/4" Footswitch LFE Input N/A Output Connectors XLR L/R, 1/4" TRS L/R, RCA L/R AC Power Input 100VAC-240VAC Enclosure 15mm Reinforced MDF Finish Black Vinyl Wrap Grill Steel Perf Dimensions (H x W x D) 13.3" (339mm) X 11.57" (294mm) X 14.25" (362mm) Weight 26.01 lb. (11.8 kg)