Jackson Audio Amp Mode MOSFET ...

1.990,-

AMP MODE MOSFET Boost The AMP MODE Boost is based on the exact same MOSFET transistor boost circuit that is found in the celebrated Jackson Audio PRISM preamp. It stacks well with other pedals as well as itself. As an always-on boost or even an added a second boost to the rest of your signal chain and other drive pedals, AMP MODE can really help sculpt your drive from classic overdriven rhythm to super articulate and saturated lead tones. • MOSFET Boost pedal • Single control - less is more • Perfect as a preamp, always-on or to give that extra push to gain sounds • Tiny footprint and top mounted jacks - for ease of pedalboard mounting • Powered by 9-18 V DC PSU        (centre -, 2.1mm, ~ 10 mA current draw) MOSFET transistors are a very popular choice for boost circuits, because they have many amp-like characteristics when they clip. However, several top-selling MOSFET-based boost pedals on the market can also have a very noticeable crackle when their gain knobs are rotated. Jackson Audio studied the behaviour and came up with a way to fix this issue, so the AMP MODE is perfectly silent when the boost knob is turned. The single boost control sets the overall boost level. AMP MODE is a true boost in that when the boost control is fully counter-clockwise, it doesn't boost your signal, it instead acts as a unity gain buffer that bolsters your guitars signal to prevent against tonal loss when using other effects pedals or when driving long cable runs. Use the AMP MODE as a preamp for your overall signal, a boost to push an overdrive pedal even further into saturation or as a post overdrive boost to clarify and push your guitar forward in the mix. The AMP MODE features 9-18V operation, true bypass switching and a tiny footprint with top mounted jacks, all making it easy to fit into any setup.

Jackson Audio Asabi ...

4.590,-

Mateus Asato Signature Overdrive/Distortion Pedal with MIDI ASABI - Mateus Asato Signature Modular Distortion/Overdrive Developed with Mateus Asato, one of the predominant guitar voices of today, the ASABI Modular Distortion/Overdrive pedal had a two-year development process. Every detail was painstakingly refined to ensure that both the Distortion and Overdrive channels would work together, to perfectly recreate the soulful overdrive and the liquid high-gain tones that legendary guitarist Mateus Asato is known for. Incorporating the Jackson Audio signature modern-day control features such as Clipping Styles, a 3-band Active EQ for maxing out the pedal’s tonal flexibility, their innovative GAIN CYCLE circuit and full MIDI control and the result is undoubtedly one of the most versatile platforms for drive tones ever created. In addition, Jackson Audio has developed the technology to create replaceable distortion modules for ASABI - analog circuit boards that can be easily swapped out to fundamentally change the tonal direction of the pedal. While a range of modules will be available, the pre-installed MODERN HIGH GAIN module gives you a plethora of tones, ranging from classic rock to crushing heavy metal! • Analog Distortion and Overdrive pedal • Unique modular and replaceable Distortion board concept • Installed MODERN HIGH GAIN Distortion module  - based on the JCM800 high-gain sound • Overdrive circuit based on the smooth Plexi-style tone • Active 3-band Parametric-EQ - for optimal tone shaping • MIDI control • 4 Clipping-Diode Styles for both Distortion and Overdrive circuits, with drastically different sound characteristics • Output level matching circuitry - counteracts output level differences of various Clipping-Diode options • GAIN CYCLE circuit - for instant gain adjustment in 4 steps • Small footprint and top-mounted jacks - for ease of pedalboard mounting • Powered by 9 V DC PSU          (centre -, 2.1mm, ~ 160 mA current draw) The name ASABI, which means, "of unusual birth" was chosen by Mateus because it speaks to the unique nature of this pedal, as well as his own family heritage. Designed to make the pedal a complete 'Marshall-in-a-box', ASABI’s factory installed MODERN HIGH GAIN module features a super high-gain Distortion circuit. This perfectly recreates the detail and harmonic complexity of a legendary JCM800 amplifier. With this module, the resulting tone is very open, crisp and addictively fun to play and covers everything from 80's hard rock to more modern high gain tones at any volume. Adding to the functionality, the Distortion circuit also has a 3-Band Active EQ that is based on the legendary Baxandall EQ. This gives tremendous tonal flexibility, tailored specifically for guitarists and to top it off, via internal trim pots, you can change the frequency and Q of each band making this Fully-Parametric. Other optional Distortion modules available will include the LARGE MOUSE - a fully analog distortion module with the legendary sound of the ProCo Rat distortion - with many more to come and being released all the time, this modular concept will turn ASABI into your drive Chameleon! ASABI’s separate Overdrive channel features a soft clipping circuit that was designed to capture the smooth overdrive and touch responsiveness of a vintage Marshall Plexi. This circuit, which is in its own true bypass loop, can be used independently of the Distortion and is very useful for boosting the front end of that circuit for even higher gain. But that isn’t all. With 4 different Styles of clipping modes, each can drastically alter the tone and feel of the way the Distortion or Overdrive clips. With ‘Vintage Marshall’, ‘Classic Screamer’, ‘Asymmetric’ or ‘Symmetrical’ clipping, ASABI can really be the foundation of any distortion tone you wish to achieve to suit your tone goals. Amongst the most exciting features of the ASABI is the Gain Cycle, which takes the Gain knob setting, and divides it into 4 equal parts, making them instantly accessible as steps to cycle through by simply pressing both footswitches simultaneously. As with all of Jackson’s multi-option drive pedals, a unique circuit matches the output level of the pedal in its various clipping diode styles. So, no matter which of the four clipping options you choose, on either Distortion or Overdrive sides, your volume level will remain constant. This helps to you to alter how the pedal interacts with your amp or any other pedal(s) you may have in your rig and all on the fly. Add in MIDI control over Clipping Styles, Gain-Cycle options, Drive EQ options as well as ON/OFF of the Overdrive and Drive circuits and the ASABI is definitely the most powerful and comprehensive analog drive pedal ever made.

Jackson Audio Belle Starr ...

2.560,-

Drew Shirley Signature Drive Pedal BELLE STARR Signature Low/Mid Gain Overdrive The result of several months of collaboration with Drew Shirley from Grammy Award winning rock band Switchfoot, the BELLE STARR is a low/mid gain pedal perfect for keeping the tone of your instrument intact. To get his signature overdriven sound, Drew runs super small, low-wattage tube amps wide-open and the BELLE STARR was designed to recreate exactly these tones. • Low/Mid Gain Overdrive pedal • Smooth and natural breakup style of non-negative feedback amps • Unique clipping circuit featuring MOSFET transistors instead of silicon diodes • Tiny footprint and top mounted jacks - for ease of pedalboard mounting • Powered by 9-18 V DC PSU        (centre -, 2.1mm, ~ 20 mA current draw) Purposely not a high-gain overdrive, the BELLE STARR features a low/mid gain circuit that has the smooth and natural breakup characteristics of smaller, non-negative feedback amps. To make the overdrive as natural-sounding and amp-like as possible, Jackson Audio incorporated a unique clipping circuit that features MOSFET transistors instead of traditional silicon diodes. 8 months of dialling in the BELLE STARR with every variation of amp from Fender to Marshall, Vox and of course Jackson amps has ensured that the BELLE STARR will work on any amp that you couple it up to. The BELLE STARR features 9-18V operation, true bypass switching and a small footprint with top mounted jacks, all making it easy to fit perfectly into any rig!

Jackson Audio Bloom V2 Black ...

4.290,-

BLOOM V2 MIDI-Controllable Optical Compressor Designed to give guitarists maximum dynamic tonal control, the BLOOM V2 is a comprehensive dynamic engine that features fully fledged MIDI control over all 6 compression settings. A three-fold device, the BLOOM V2 manipulates the dynamics of the instrument by way of precisely tuned optical compression, 3-band equalization, boost and sustain circuits which can be activated separately or in tandem with each other, allowing compression control in ways never before possible. • Compressor pedal • Optical LA-2A style limiting circuit • MIDI control over all 6 compression parameters, ON/OFF and Level • 6 instant access presets • Flat frequency response paired with 3-band EQ for optimal tone shaping • Small footprint and top-mounted jacks - for ease of pedalboard mounting • Powered by 9 V DC PSU        (centre -, 2.1mm, ~ 300 mA current draw) The BLOOM V2 features an optical limiting circuit that takes its inspiration from compressors designed during the golden age of vacuum tube circuits, known for their transparency and subtlety. While the pedal can provide a very aggressive response at more extreme compression settings, its real strength lies in its ability to add a gentle sweetening and roundness to the tone, as the optical circuit works to polish off any rough edges in the sound. Hidden inside the BLOOM V2 is a second auxiliary compressor circuit identical to the main compressor with two internal trimmers for Comp and Volume. It can be used in series ahead of the main compression circuit in making notes sustain, while still remaining clear and clean. The BLOOM V2 can work as a regular set and forget boost. However, by pressing and holding the footswitch down, the BLOOM circuit can slowly ramp up to the level set by the boost. This programmable ramp-up time, can be used to increase sustain on held notes or to perfectly match the dynamics in a song. The 3-band EQ circuit features a studio-grade EQ that gives tremendous tonal flexibility. Based on the legendary Baxandall EQ that is featured in countless studio devices, the BLOOM V2 takes this circuit and tailors it for guitarists. Jackson Audio spent a huge amount of time on this EQ dialling it in, so it would hit all the frequencies that guitarists need to adjust and then sweetened it by removing the ear-fatiguing highs and lows that can appear at extreme settings. Because of its natural touch response, the BLOOM V2 is ideal for players who typically don’t use compression but want the ‘mastered’ response that optical compression gives to a guitarists tone. Add in the MIDI control of the individual circuits Bypass features (Compressor, EQ, BLOOM) and the overall BLOOM level (via MIDI expression control) and the BLOOM V2 is no doubt one of the most versatile compressor pedals ever made.

Jackson Audio Blossom Optical ...

2.650,-

Optical Compressor Pedal BLOSSOM Optical Compressor Featuring exactly the same optical limiting compression circuit as Jackson Audio’s fully featured compression masterpiece the BLOOM, the BLOSSOM is a simple and easy to use optical compressor. Because of its natural and touch responsive bloom, the BLOSSOM is ideal for players who typically don’t use compression but want the ‘mastered’ response that optical compression gives to a guitarist’s tone. • Compressor pedal • Optical style limiting circuit from the Jackson Audio BLOOM • Simple and easy to use control set • Flat frequency response that keeps your tone untouched • Tiny footprint and top-mounted jacks - for ease of pedalboard mounting • Powered by 9 - 18 V DC PSU        (centre -, 2.1mm, ~ 20 mA current draw) Known for its transparency and subtlety, the BLOSSOM features an optical limiting circuit. Based on the BLOOM’s “country-style” green channel, it takes its inspiration from compressors designed during the golden age of vacuum tube circuits and is perfect for those players who want to squeeze, but also want to keep it simple. Although the pedal can provide a very aggressive response at more extreme compression settings, its real strength lies in its ability to add a gentle sweetening and roundness to the tone as the optical circuit works to polish off any rough edges in the sound. The frequency response of the compressor section is ruler flat and does not boost or cut any of your highs or lows. Just like a well-designed compressor circuit should, the BLOSSOM alters the dynamics of the guitar signal and not the tone - a good compressor should be felt and not heard!

Jackson Audio Broken Arrow ...

3.690,-

BROKEN ARROW V2 MIDI MIDI-controllable Overdrive & Boost With innovative features never before seen in ANY other overdrive pedal made, the BROKEN ARROW V2 MIDI is a comprehensive overdrive platform that is designed to give guitarists an incredible range of overdriven tones. Featuring a very flexible soft clipping overdrive circuit with 4 distinct Styles of clipping options, an innovative gain adjustment feature called GAIN CYCLE, a 3-band active EQ for maximum tonal flexibility and the MOSFET boost circuit found in Jackson Audio’s top-selling PRISM pedal, the BROKEN ARROW V2 MIDI is topped off with MIDI control over all its plentiful parameters. • Overdrive & Boost pedal, with Soft-clipping overdrive circuit • Active 3-band EQ - for optimal tone shaping • MIDI control over all parameters, ON/OFF and Boost • 4 Clipping-Diode Styles with drastically different sound characteristics • 4 differently EQ’d Boost Styles • GAIN CYCLE circuit - for instant gain adjustment in 4 steps • Small footprint and top-mounted jacks - for ease of pedalboard mounting • Powered by 9 V DC PSU        (centre -, 2.1mm, ~ 100 mA current draw) For the overdrive circuit, the pedal is based on a soft clipping overdrive designed in the same vein as the venerable TS-808, but without a set “mid-hump”. Instead you can use the active 3-band EQ to tone-shape the overdrive sound exactly as desired. There are also 4 selectable and distinct clipping modes: 1. Green: Classic Screamer 2. Magenta: Asymmetric Clipping - great for aggressive rhythm parts 3. Blue: Symmetrical Clipping - for a more focused and direct tone 4. Amber: Vintage Marshall - higher headroom for more open and a less compressed tone One of the most exciting features of the BROKEN ARROW V2 MIDI is the GAIN CYCLE, which takes the GAIN knob setting and divides that level of gain into 4 equal instantly accessible steps to cycle through. A unique circuit level matches the output of the pedal as various clipping diodes are selected, so now you can select between all four clipping options and your volume level will remain constant. The boost circuit is MOSFET based, much like the AMP MODE found in Jackson Audio’s best-selling PRISM Preamp pedal. This has its own true bypass loop, which means it can be used independently of the DRIVE circuit. One of the things that makes the boost in the pedal unique from other boosts on the market are the 4 styles available. Each style is EQ’d slightly differently, which allows it to alter how it interacts with the overdrive circuit in the BROKEN ARROW V2 MIDI or any other pedal you may have in your rig To top it off, the DRIVE circuit has a 3-band active EQ that gives tremendous tonal flexibility. Based on the legendary Baxandall EQ that is featured in countless studio devices, the BROKEN ARROW V2 MIDI takes this circuit and tailors it for guitarists. Jackson Audio spent a huge amount of time on this EQ dialling it in, so it would hit all the frequencies that guitarists need to adjust and then sweetened it by removing the ear-fatiguing highs and lows that can appear at extreme settings. BROKEN ARROW V2 MIDI – the ultimate drive flexibility for your pedalboard!

Jackson Audio Fuzz ...

690,-

FUZZ CLASSIC/MODERN Replacement Fuzz Modules These analog plug-in modules are an assortment of fully analog fuzz modules for the Jackson Audio FUZZ pedal. These are faithful recreations of multiple historic and sought-after fuzz circuits, replacing the FUZZ’ stock MODERN FUZZ module with the legendary sound of fuzzes through the ages. Dead simple to install, you simply unscrew the FUZZ’ backplate, remove the stock fuzz module and replace it with any of the analog fuzz plug-ins. Voila! Your new fuzz pedal with all its features is accessible ready! Main Features: Fully-analog swappable module plug-in boards for the Jackson Audio FUZZ pedal Fuzz circuits based on legendary fuzz sounds Easy installation FUZZ CLASSIC/MODERN The classic later-era Fuzz with the smiley face! This plug-in has high gain and a tighter/crisper feel and is perfect for the later Jimi era tones.   Also available: MODERN FUZZ DELUXE Like the MODERN FUZZ plug-in, the MODERN FUZZ DELUXE plug-in expands the tones available by adding two additional types of clipping. With the jumper set in the DIST (distortion) position, the clipping is smoother and with more headroom. With the jumper set in the OD (overdrive) position, the clipping is smoother still and has the feel and vibe of a vintage overdrive. FUZZ PAGE MARK II If you like your fuzz to be completely rude and unruly, this is your fuzz! The sound of Led Zeppelin and full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine! GOAT HEAD Based on the legendary Big Muff Pi Ram’s Head, the GOAT HEAD is the sound of Pink Floyd! Insane levels of fuzz and sustain are hallmarks of this circuit, but this plug-in does something that no other Big Muff can do! With the parametric EQ on the FUZZ, you can adjust the EQ so you can bring the mids forward on this circuit! Also included on the plug-in board are TONE and GAIN trimmers so you can fine-tune the classic Big Muff tone control and adjust the overall gain style of the circuit.

Jackson Audio FUZZ Modular ...

3.590,-

FUZZ Modular Fuzz Pedal with Octave Sporting that spitting, snarling and surly sound of rock legends past and present, the FUZZ Modular Fuzz pedal from Jackson Audio takes faithful recreations of historic fuzz circuits and brings them together in one modular pedal. This allows you to create classic fuzz tone, as well as new fuzz sounds that would have been impossible with just the original circuits! The idea of creating a modular fuzz came about as we were trying to decide which style of fuzz would be the most musical fuzz of all time. The answer quickly became “All of them! They’re all different and bring something unique sonically”. With the FUZZ, you can update your fuzz sound completely with our swappable analog plug-in modules and turn your device into a whole new pedal with a simple and affordable plug-in swap out. In the 30 years since Brad Jackson began playing guitar, he’s always loved fuzz pedals. Having bought countless versions of fuzzes over the years, in his mind these pedals have always had a massive shortcoming - they desperately need more effective tone controls! That’s why Jackson Audio designed the FUZZ with a 3 band, fully parametric EQ. EQ and especially the mids are where the guitar makes its stand. Not enough mids and your guitar is lost in the mix. Too much highs and your tone is piercing and off-putting. Too much bass and you compete sonically with the bass drum and bass player. With the 3-band Parametric EQ on the FUZZ, you have 9 controls at your disposal to fully sculpt your tone and make sure the riffs you are laying down are NEVER lost in the mix! Main Features: •    Analog Octave Fuzz pedal •    Unique modular and replaceable Fuzz plug-in concept •    Installed MODERN FUZZ plug-in module - a modern take on all that is good from a spluttery vintage pedal •    Additional included FUZZ CLASSIC/VINTAGE plug-in module - based on the classic Fuzz Face circuit •    Separately switchable Octave circuit with Blend control •    Other plug-in modules available for a world of fuzz tones •    Active 3-band Parametric-EQ - for optimal tone shaping •    Small footprint and top-mounted jacks - for ease of pedalboard mounting •    Powered by 9 V DC PSU         (centre -, 2.1mm, ~ 50 mA current draw) A good fuzz and a good octave pedal go hand in hand. Jimi knew it, Stevie knew it and you know it. If you want to put some purple in your haze, you’re going to need an octave pedal and the octave circuit in the FUZZ is outstanding! Covering everything from perfectly pure octave up to screaming splatting sonic mayhem, the octave circuit in the FUZZ is the perfect marriage of vintage and modern thanks to its unique octave BLEND control. The BLEND control mixes your clean signal with the fuzz/octave signal so you can dial in precisely how much octave effect you want. Guys like Doyle Bramhall II use this to great effect by adding just a little octave to their sound which gives it a little “lift”. With the BLEND control fully counter-clockwise, the octave circuit acts as a boost and is perfect for slamming the front of the fuzz circuit for more gain! Pro Tip! Boost + Fuzz Face = Tone Bender! This boost is also perfect for boosting the front of other pedals or just running as an always-on signal buffer/booster. Fully clockwise, there is no clean blend so your signal is fully fuzzed out with however much fuzz/octave you have dialled in with the OCT control. The Fuzz is supplied with two analog plug-in boards, so right out of the box you have two completely different and versatile circuits to choose from. From vintage-style fuzz at lower settings, to snarling spitting fuzz at higher settings the MODERN FUZZ (installed) plug-in does it all and cleans up beautifully when your guitars volume control is lowered. FUZZ CLASSIC/VINTAGE is the additional plug-in the FUZZ ships with. This plug-in is the classic Fuzz with the ‘smiley face’ and has lower gain and a looser/softer feel which is perfect for the earlier Jimi-era tones. In addition, a growing range of other modules will be available. Dead simple to install, you simply unscrew the FUZZ’ backplate, remove the stock fuzz module and replace it with any of the analog fuzz plug-ins. Voila! Your new fuzz pedal with all its features is accessible and ready to go!

Jackson Audio Fuzz Page Mark ...

690,-

FUZZ PAGE MARK II Replacement Fuzz Modules These analog plug-in modules are an assortment of fully analog fuzz modules for the Jackson Audio FUZZ pedal. These are faithful recreations of multiple historic and sought-after fuzz circuits, replacing the FUZZ’ stock MODERN FUZZ module with the legendary sound of fuzzes through the ages. Dead simple to install, you simply unscrew the FUZZ’ backplate, remove the stock fuzz module and replace it with any of the analog fuzz plug-ins. Voila! Your new fuzz pedal with all its features is accessible ready! Main Features: Fully-analog swappable module plug-in boards for the Jackson Audio FUZZ pedal Fuzz circuits based on legendary fuzz sounds Easy installation FUZZ PAGE MARK II If you like your fuzz to be completely rude and unruly, this is your fuzz! The sound of Led Zeppelin and full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine!   Also available: MODERN FUZZ DELUXE Like the MODERN FUZZ plug-in, the MODERN FUZZ DELUXE plug-in expands the tones available by adding two additional types of clipping. With the jumper set in the DIST (distortion) position, the clipping is smoother and with more headroom. With the jumper set in the OD (overdrive) position, the clipping is smoother still and has the feel and vibe of a vintage overdrive. FUZZ CLASSIC/MODERN The classic later-era Fuzz with the smiley face! This plug-in has high gain and a tighter/crisper feel and is perfect for the later Jimi era tones. GOAT HEAD Based on the legendary Big Muff Pi Ram’s Head, the GOAT HEAD is the sound of Pink Floyd! Insane levels of fuzz and sustain are hallmarks of this circuit, but this plug-in does something that no other Big Muff can do! With the parametric EQ on the FUZZ, you can adjust the EQ so you can bring the mids forward on this circuit! Also included on the plug-in board are TONE and GAIN trimmers so you can fine-tune the classic Big Muff tone control and adjust the overall gain style of the circuit.

Jackson Audio Goat Head ...

690,-

GOAT HEAD Replacement Fuzz Modules These analog plug-in modules are an assortment of fully analog fuzz modules for the Jackson Audio FUZZ pedal. These are faithful recreations of multiple historic and sought-after fuzz circuits, replacing the FUZZ’ stock MODERN FUZZ module with the legendary sound of fuzzes through the ages. Dead simple to install, you simply unscrew the FUZZ’ backplate, remove the stock fuzz module and replace it with any of the analog fuzz plug-ins. Voila! Your new fuzz pedal with all its features is accessible ready! Main Features: Fully-analog swappable module plug-in boards for the Jackson Audio FUZZ pedal Fuzz circuits based on legendary fuzz sounds Easy installation GOAT HEAD Based on the legendary Big Muff Pi Ram’s Head, the GOAT HEAD is the sound of Pink Floyd! Insane levels of fuzz and sustain are hallmarks of this circuit, but this plug-in does something that no other Big Muff can do! With the parametric EQ on the FUZZ, you can adjust the EQ so you can bring the mids forward on this circuit! Also included on the plug-in board are TONE and GAIN trimmers so you can fine-tune the classic Big Muff tone control and adjust the overall gain style of the circuit.   Also available: MODERN FUZZ DELUXE Like the MODERN FUZZ plug-in, the MODERN FUZZ DELUXE plug-in expands the tones available by adding two additional types of clipping. With the jumper set in the DIST (distortion) position, the clipping is smoother and with more headroom. With the jumper set in the OD (overdrive) position, the clipping is smoother still and has the feel and vibe of a vintage overdrive. FUZZ CLASSIC/MODERN The classic later-era Fuzz with the smiley face! This plug-in has high gain and a tighter/crisper feel and is perfect for the later Jimi era tones. FUZZ PAGE MARK II If you like your fuzz to be completely rude and unruly, this is your fuzz! The sound of Led Zeppelin and full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine!

-21%

Jackson Audio Golden Boy Mini ...

2.490,-

3.148,-

Tilbud gjelder kun 1 stk. på lager. GOLDEN BOY Mini Mini Transparent Overdrive The GOLDEN BOY Mini - the epitome of versatile and transparent overdrive, designed in collaboration with the renowned guitarist Joey Landreth. With its exceptional harmonic detail and abundant headroom, this compact overdrive pedal takes the concept of transparent overdrive to new heights, using a simple and powerful interface.  Main Features • Transparent Overdrive pedal • Condensed version of the original GOLDEN BOY with features distilled down to the most used settings • Based on the celebrated Bluesbreaker/King of Tone circuit  • Active 3-band EQ - for optimal tone shaping • 2 Clipping-Diode Styles with drastically different sound characteristics o ASYM: Asymmetrical silicon diode clipping of the top and bottom of the guitars waveform – great for laying down aggressive rhythm parts o LED: Symmetrical LED Diode clipping – with much higher headroom for less compressed tone • Small footprint and top-mounted jacks - for ease of pedalboard mounting • Powered by regular 9 V DC PSU          (centre -, 2.1 mm, 35mA current draw) The GOLDEN BOY Mini is the perfect addition to any guitarist’s arsenal, allowing you to shape and enhance your tone in ways you’ve never imagined. Its transparent nature ensures that your core tone remains intact, while adding a dynamic of warmth, richness, and depth that elevates your playing to new levels. Its intuitive controls allow you to dial in the perfect blend of overdrive, from subtle grit to soaring, harmonically rich tones. The pedal’s wide-ranging gain control ensures that it can adapt to any musical style or genre, whether you’re playing delicate fingerpicked melodies or unleashing blistering solos. Pair it with Asymmetrical or Led Clipping and put the final touches with it’s 3-band Baxandall-style EQ. Beyond its exceptional sound, the GOLDEN BOY Mini is built to withstand the rigors of the road. It's rugged construction and top-quality components ensure reliability and durability, making it a reliable companion for both studio sessions and live performances. Whether you’re a seasoned professional or an aspiring guitarist, the GOLDEN BOY Mini will transform your tone and ignite your creativity. Discover the GOLDEN BOY Mini and unlock the true potential of your guitar tone. Order yours today and witness the power of transparent overdrive like never before. Elevate your sound and embark on a sonic journey with the GOLDEN BOY Mini!

Jackson Audio Golden Boy ...

3.850,-

GOLDEN BOY MIDI-controllable Transparent Overdrive Designed in collaboration with Canadian alt-country star Joey Landreth, the GOLDEN BOY Transparent Overdrive is in no doubt one of the most versatile transparent overdrive pedals ever made. Rich in harmonic detail and overflowing with headroom, the pedal redefines the concept of transparent overdrive and brings it up to date with modern features, such as styles for clipping options, a 3-band active EQ for maximum tonal flexibility and Jackson Audio’s innovative GAIN CYCLE feature. All that is topped off with a separately switchable MOSFET boost circuit and full MIDI control over all the GOLDEN BOY’s plentiful parameters. • Transparent Overdrive and Boost pedal • Based on the celebrated Bluesbreaker/King of Tone circuit • Active 3-band EQ - for optimal tone shaping • MIDI control over all parameters, ON/OFF and Boost • 4 Clipping-Diode Styles with drastically different sound characteristics • 4 differently EQ’d Boost Styles • GAIN CYCLE circuit - for instant gain adjustment in 4 steps • Small footprint and top-mounted jacks - for ease of pedalboard mounting • Powered by 9 V DC PSU         (centre -, 2.1mm, ~ 100 mA current draw) For the overdrive circuit, the pedal is based on the Bluesbreaker/King of Tone circuit, resulting in a very open, uncompressed and transparent tone - think ‘John Mayer style’ overdriven tones. It sits in the mix perfectly and while it adds overdrive and grit, your guitar still sounds like your guitar. Where the GOLDEN BOY differs from other Bluesbreaker type circuits is that its overdrive has the ability to run much higher gain. There are also 4 selectable and distinct clipping modes available to further tailor the tone to you. One of the most exciting features of the GOLDEN BOY is the GAIN CYCLE, which takes the GAIN knob setting and divides that level of gain into 4 equal instantly accessible steps to cycle through. A unique circuit level matches the output of the pedal as various clipping diodes are selected, so now you can select between all four clipping options and your volume level will remain constant. The boost circuit is MOSFET based, much like the AMP MODE found in Jackson Audio’s best-selling PRISM Preamp pedal. This has its own true bypass loop, which means it can be used independently of the DRIVE circuit. One of the things that makes the boost in the pedal unique from other boosts on the market are the 4 styles available. Each style is EQ’d slightly differently, which allows it to alter how it interacts with the overdrive circuit in the GOLDEN BOY or any other pedal you may have in your rig To top it off, the DRIVE circuit has a 3-band active EQ that gives tremendous tonal flexibility. Based on the legendary Baxandall EQ that is featured in countless studio devices, the GOLDEN BOY takes this circuit and tailors it for guitarists. Jackson Audio spent a huge amount of time on this EQ dialling it in, so it would hit all the frequencies that guitarists need to adjust and then sweetened it by removing the ear-fatiguing highs and lows that can appear at extreme settings.

Jackson Audio Hour Glass Dual ...

4.290,-

Jackson Audio HOUR GLASS Dual Studio Compressor The HOUR GLASS Dual Compressor Pedal - Unlock timeless sustain and endless creativity with dual, independent circuits inspired by the legendary Ross compressor. It is your ticket to extended sustain and unparalleled tonal control.  From warm, natural compression to soaring sustain, the HOUR GLASS opens up a world of sonic possibilities for you to explore. Main Features: • Dual Compressor effects pedal • Based on the legendary Ross Compressor circuit • Features two identical, completely independent compressor circuits • Perfect for setting one for single coil guitars, the other for humbucker guitars – for precise tone and dynamic shaping when switching guitars or use both circuits simultaneously for endless sustain! • 3 Attack settings accessible for each compressor circuit o Fast - 100 ms o Medium - 400 ms o Slow - 1600 ms • Treble switch for shaping the high frequency tones o Flat o Medium o High • Parallel Compression with Blend knob - for mixing in the Dry signal and maintaining natural playing transients • Small footprint and top-mounted jacks - for ease of pedalboard mounting • Powered by 9-18 V DC PSU (centre -, 2.1mm, ~ 60 mA current draw) Choose from Fast, Medium, or Slow Attack time options to tailor the HOUR GLASS’s response to your playing style, and use the Treble toggle switch to select Flat, Medium, or High boost options to help shape your high-frequency tones.  Set one compressor for your single coil guitars, the other compressor for humbucker guitars and have precise tone and dynamic shaping when you switch guitars! Both compressors can also be engaged simultaneously for endless sustain!  Discover the freedom of expression with two independent circuits, that maintain the transparency of your guitar’s tone. Precision controls for Level, Sustain, and Blend on each circuit allow you to sculpt your sound exactly as you desire. Built to withstand the rigors of time and the road, the HOUR GLASS is your reliable companion on every musical journey.  Unleash your creativity, transcend genres, and experience endless sustain with the HOUR GLASS Dual Compressor Pedal - Where Sustain has No Boundaries!

Jackson Audio Large Mouse ...

690,-

LARGE MOUSE Replacement Drive Module CHANGE YOUR CIRCUIT - CHANGE YOUR SOUND The LARGE MOUSE module is a fully analog distortion module for the Jackson Audio ASABI Mateus Asato Signature Distortion/Overdrive pedal. This replaces the ASABI’s stock MODERN HIGH GAIN distortion module with the legendary sound of the ProCo Rat, with its arena rock rhythm tones and soaring leads. The circuitry in the LARGE MOUSE delivers all the snarl and spit of the original and celebrated Rat, but with many more features and control. Coupled with an active EQ, 4x clipping options and Jackson Audio’s innovative Gain Cycle feature, you've never heard or seen a Rat like this before! To make the LARGE MOUSE even more faithful to the original tone, Jackson Audio procured the mythical LM308 chip that is used in the most sought-after vintage units. Dead simple to install, you simply unscrew the ASABI’s backplate, remove the stock distortion module and replace it with the LARGE MOUSE. Voila! Your new distortion mode with all its features is accessible ready to be the most raucous rodent on your board - ever! • Analog Distortion module for ASABI Mateus Asato Signature Distortion/Overdrive • Replaces MODERN HIGH GAIN Distortion module in the ASABI • Distortion circuit based on the legendary ProCo Rat • Including the mythical LM308 chip for the most authentic tone • Active 3-band Parametric-EQ - for optimal tone shaping • 4 Clipping-Diode Styles with drastically different sound characteristics • GAIN CYCLE circuit - for instant gain adjustment in 4 steps • Easy installation

Jackson Audio Modern Fuzz ...

690,-

MODERN FUZZ DELUXE Replacement Fuzz Modules These analog plug-in modules are an assortment of fully analog fuzz modules for the Jackson Audio FUZZ pedal. These are faithful recreations of multiple historic and sought-after fuzz circuits, replacing the FUZZ’ stock MODERN FUZZ module with the legendary sound of fuzzes through the ages. Dead simple to install, you simply unscrew the FUZZ’ backplate, remove the stock fuzz module and replace it with any of the analog fuzz plug-ins. Voila! Your new fuzz pedal with all its features is accessible ready! Main Features: Fully-analog swappable module plug-in boards for the Jackson Audio FUZZ pedal Fuzz circuits based on legendary fuzz sounds Easy installation MODERN FUZZ DELUXE Like the MODERN FUZZ plug-in, the MODERN FUZZ DELUXE plug-in expands the tones available by adding two additional types of clipping. With the jumper set in the DIST (distortion) position, the clipping is smoother and with more headroom. With the jumper set in the OD (overdrive) position, the clipping is smoother still and has the feel and vibe of a vintage overdrive.   Also available: FUZZ CLASSIC/MODERN The classic later-era Fuzz with the smiley face! This plug-in has high gain and a tighter/crisper feel and is perfect for the later Jimi era tones. FUZZ PAGE MARK II If you like your fuzz to be completely rude and unruly, this is your fuzz! The sound of Led Zeppelin and full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine! GOAT HEAD Based on the legendary Big Muff Pi Ram’s Head, the GOAT HEAD is the sound of Pink Floyd! Insane levels of fuzz and sustain are hallmarks of this circuit, but this plug-in does something that no other Big Muff can do! With the parametric EQ on the FUZZ, you can adjust the EQ so you can bring the mids forward on this circuit! Also included on the plug-in board are TONE and GAIN trimmers so you can fine-tune the classic Big Muff tone control and adjust the overall gain style of the circuit.

Viser 1 til 15 (av 20 produkter)