Lewitt LCT 940 Authentica Rør ...

17.570,-

Lewitt LCT 940 Premium large-diaphragm FET condenser microphone and top-notch tube mircophone in a single housing. Blend the two independent characteristics for unlimited possibilities. Tube and FET microphone in one housing Blend tube and FET circuit at any ratio Studio centrepiece 12AX7 tube Remote control and power supply in one Multi-pattern design Included: Shock mount, LCT 40 Wxx, 11-pin audio cable The LCT 940 unifies the specific characteristics of a premium large diaphragm FET condenser microphone and a top-notch tube microphone. With "Tube" you get warmth and musical harmonics, while "FET" gives you clear and nuanced sound. Blend tube and FET circuit at any ratio and find your ideal mix. The LCT 940 features a total of nine different polar patterns. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Transducer Ø - 25.4 mm, 1 in Polar pattern - Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns Frequency range - 20 ... 20,000 Hz Sensitivity - 23 mV/Pa, -33 dBV/Pa (cardioid) 20 mV/Pa, -34 dBV/Pa (omni) 23 mV/Pa, -33 dBV/Pa (figure-8) Equivalent noise level (FET) - 8 dB (A), cardioid 9 dB (A), omni 8 dB (A), figure-8 Equivalent noise level (Tube) - 12 dB (A), cardioid 13 dB (A), omni 12 dB (A), figure-8 Max. SPL for 0.5 % THD (FET) - 143 dBSPL, 0 dB pre-attenuation Max. SPL for 0.5% THD (Tube) - 140 dBSPL, 0 dB pre-attenuation Signal / noise ratio (FET) - 86 dB (A) Signal / noise ratio (Tube) - 82 dB (A) Dynamic range of FET mic. Amp. - 135 dB Dynamic range of Tube mic. Amp. - 128 dB Pre-attenuation pad - 0 dB -6 dB -12 dB -18 dB Low-cut filter - linear  40 Hz (12 dB/oct) 150 Hz (6 dB/oct) 300 Hz (6 dB/oct) Internal impedance - 200 Ω Rated load impedance - 1,000 Ω PSU - supply voltage - 230 V, 50 Hz 110 V, 60 Hz Current consumption - 170 mA Connector - Gold plated 11-pin XLR Microphone dimensions - 192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in PSU dimensions - 250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in Microphone net weight - 662 g, 23.3 oz PSU net weight - 1,930 g

Røde K2 Rør ...

10.495,-

Rørbasert 1"” stormembransmikrofon med trinnløs karakteristikk. Utrolig lite egenstøy og sensitiv rørmikrofon med rik og varm rørkarakter som gjengir hver detalj og nyanse, samtidig som den håndterer høye lydtrykk fra høyttalerkabinetter etc. K2 er designet og utviklett på Rødes nye fabrikk i Australia og havner helt klart i en klasse for seg. Separat strømforsyning og kabel inkludert. Leveres i en kraftig, støpt plastkoffert. Røde SM2 Shock Mount inngår. • Trinnløs karakteristikk • Klasse A rørbestykning • Separat strømforsyning • Superb Kondensatormikrofon som fanger sjelen i dine innspillinger Acoustic Principle Pressure Gradient Active Electronics Valve/tube impedance converter with bipolar output buffer Capsule 1.00" Polar Pattern Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 162dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 30.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Power Options Weight 815.00gm Dimensions 208.00mmH x 55.00mmW x 55.00mmD Output     Save Save Save

Røde NTK Rør ...

8.895,-

NTK Premium Valve Condenser Microphone The NTK is a premium large-diaphragm valve condenser microphone designed to provide incredible detail for the most demanding studio recording applications. Featuring a 1-inch gold-sputtered condenser capsule, hand-selected twin-triode 6922 valve and audiophile-grade components, it delivers stunning richness and warmth, making it ideal for a wide range of recording scenarios, including vocals, guitar, piano, drums and more. Key Features: Premium large-diaphgram valve condenser microphone 1-inch gold-sputtered capsule Hand-selected twin-triode 6922 valve Ultra-low noise Wide dynamic range 10-year warranty Acoustic & Electrical Specifications Acoustic Principle Pressure Gradient Active Electronics Valve/tube impedance converter with bipolar output buffer Capsule 1.00" Polar Pattern Cardioid Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 158dB SPL Maximum Output Level 29.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-Weighted) 12dBA Power Requirements PSU Output Connection XLR Mechanical Specifications Weight (g) 760 Dimensions (mm) 208 (H) x 55 (W) x 55 (D) Warranty 1 year with free extension to 10 years following registration Box Contains: 1 x NTK 1 x Power Supply 1 x SM6 (Shockmount Popfilter) 1 x RM2 Mic Holder

Sontronics Aria Rør ...

15.588,-

Sontronics - Aria Valve/tube condenser microphone Valve/tube condenser microphone Launched in 2014, our Sontronics ARIA valve/tube cardioid condenser microphone was developed and designed by Sontronics founder and designer Trevor Coley specifically for getting the best from your vocals, and is already becoming a modern classic thanks to its beautifully smooth and balanced tone. Our multi-award-winning Sontronics ARIA will give you stunning, beautiful results on every recording, thanks to its silky-smooth characteristics, its accurate response and our trademark Sontronics high-frequency roll-off. And following the development of our new MERCURY variable-pattern valve microphone, we’ve now been able to refine and improve ARIA even further*, to take its quality to the next level. As designer Trevor Coley explains: “Using only premium-quality, branded components in our UK-made circuits, we have been able make considerable improvements to ARIA’s signal-to-noise ratio and reduce its self-noise to incredibly low levels for a tube microphone. The new and improved ARIA delivers even greater levels of precision and clarity and we’re confident that you’ll love it!” “ARIA is incredibly smooth with bags of character… it easily competes with any vintage valve mic!” PAUL EPWORTH, PRODUCER (Coldplay, U2, Florence + The Machine, Adele) Housed inside the chromed grille is a large, 1.07-inch, edge-terminated capsule that captures all the detail and subtleties of any male or female vocal (sung or spoken) while the hand-selected European 12AX7/ECC83 tube lends a character that you’d expect to find in a classic vintage valve mic. For that extra level of control, the accompanying SPS-2 power supply unit boasts pad (0, -10dB) and filter (linear, 75Hz) switches as well as a tube-ready LED, letting you know when the mic is warmed up and at its best to record. Inside the unit is a pro-quality, medical-grade electricity filter to ensure that the power supply is pure and interference-free. During ARIA’s development, it was beta-tested by top artists and musicians including producer/writer Paul Epworth (Adele, Florence & The Machine, Paul McCartney), singer/songwriter PJ Harvey, and also several engineers at Abbey Road Studios, all of whom now admit they can’t live without their ARIAs! These and other users have all told us that ARIA’s sound and quality is easily matched to mics (both modern and vintage) that cost ten times more. The result is a go-to microphone that’s a must-have if you’re serious about achieving the best results from vocals but that will also give beautiful results on piano, acoustic guitar, cello and other instruments as well as voiceover and broadcast. Sontronics ARIA really will take your breath away! The ARIA microphone is supplied in its own velvet-lined wooden box, which comes in an aluminium flightcase together with its elastic spider-style shockmount, a ring mount and the SPS-2 power supply, connecting cable and power lead. Like all our mics, Sontronics ARIA is covered by our no-nonsense LIFETIME WARRANTY. ARIA HIGHLIGHTS: valve/tube condenser mic incredibly smooth sound designed to give amazing results on male and female vocals beta-tested with Paul Epworth, PJ Harvey and several engineers at Abbey Road Studios covered by LIFETIME WARRANTY RECOMMENDED FOR: male & female vocals voiceover cello, violin & viola piano acoustic guitar drum overheads Specs: Frequency response: 20Hz – 20kHz Sensitivity: 18mV/Pa -33dB ±1.5dB (0dB = 1V/Pa @ 1,000Hz) Polar pattern: Cardioid Pad: 0, -10dB Filter: Linear, 75Hz Impedance: ≤200 Ohms Equivalent noise level: 18dB (A-weighted) Max SPL (for 0.5% THD @ 1kHz): 125dB Power supply: SPS-2 115/230V *Phantom power NOT required* Connector: 8-pin connector (mic), 3-pin XLR-M (power supply) Dimensions: 230 x 55 x 55mm (mic) Weight: 744g (mic), 1155g (mic with shockmount), 1880g (power supply) Comes with: wooden box (for Aria mic), shockmount, cables, SPS-2 power supply, aluminium flightcase