Mikrofoner

Hovedbilde Lewitt LCT 40 TS Kabel for ...

569,-

Lewitt LCT 40 TS LEWITT proprietary cable to use the LCT 640 TS Dual Output Mode, 0.5 m length.

3.689,-

Lewitt LCT 440 PURE Puristic 1" studio microphone with high-end components. 1" true condenser studio microphone Best in its class for vocals and instruments High-end capsule and circuit design Cardioid polar pattern Included: Shock mount, Magnetic pop filter, Windscreen, Transport bag You’ll fall in love with its larger-than-life sound and outstanding build quality right away. Its sound is specifically designed to let you perform comfortably while sounding sensational. That is possible because the LCT 440 PURE uses the same high-end components, capsule and circuit design as our prestige models. Nothing will limit your performance. It's all about pure sound, baby. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Diaphragm - 3 micron gold sputtered Mylar Transducer Ø - 25.4 mm, 1 in Polar pattern - Cardioid Sensitivity - 27.4 mV/Pa, -31.2 dBV/Pa Equivalent noise level - 7 dB (A) Max. SPL for 0.5 % THD - 140 dBSPL Signal / noise ratio - 87 dB (A) Dynamic range - 133 dB (A) Supply voltage - 48 V ± 4 V Current consumption - 2.63 mA Internal impedance - 110 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Mic enclosure - Zinc die cast Microphone dimensions - 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in Microphone net weight - 310 g

Lewitt LCT 441 FLEX ...

3.852,-

Lewitt LCT 441 FLEX Compact 1" multi-pattern microphone with high-end components. 1" multi-pattern studio microphone Pure studio sound quality Studio allrounder High-end specifications Eight polar patterns incl. three reversed ones Included: Shock mount, Magnetic pop filter, Windscreen, Transport bag The LCT 441 FLEX is a compact multi-pattern studio microphone. It features high-spec technology and eight different polar patterns. You'll be more flexible when it comes to recording different instruments or vocals. It also allows switching between high directivity or more room impression and provides freedom to experiment. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Diaphragm - 3 micron gold sputtered Mylar Transducer Ø - 25.4 mm, 1 in Polar pattern - Omni, wide cardioid, cardioid, supercardioid, figure-8, reverse cardioid, reverse wide cardioid, reverse supercardioid Sensitivity - 17.2 mV/Pa, -35.3 dBV/Pa Equivalent noise level - 7 dB (A), cardioid Max. SPL for 0.5 % THD - 144 dBSPL Signal / noise ratio - 87 dB (A) Dynamic range - 137 dB (A) Supply voltage - 48 V ± 4 V Current consumption - 4 mA Internal impedance - 54 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Mic enclosure - Zinc die cast Microphone dimensions - 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in Microphone net weight - 325 g

Lewitt LCT 50 Cx Case for LCT ...

1.269,-

Lewitt LCT 50 Cx Millitary-grade protective case for LCT 540 SUBZERO and LCT 640 TS.

Lewitt LCT 50 Cxx Case for ...

2.779,-

Lewitt LCT 50 Cxx Millitary-grade protective case for LCT840/940.

Lewitt LCT 640 TS ...

8.999,-

Lewitt LCT 640 TS Unique 1" true condenser multi-pattern microphone to change the pattern even after the recording. 1" multi-pattern studio microphone Full, crisp, and well-balanced sound Revolutionary Dual Output Mode POLARIZER plugin to create any pattern after the fact Stereo capabilities Included: Shock mount, Magnetic pop filter, Windscreen, TS adapter cable, Transport bag The LCT 640 TS works as a traditional multi-pattern microphone, a stereo microphone, and a mic that can change the polar pattern after the fact with its Dual Output Mode. The 1" true condenser capsule and high-end specifications guarantee precise recordings. Whatever you record with the LCT 640 TS will sound incredibly detailed. Your vocals sound larger-than-life, your instruments full and vibrant. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Diaphragm - 3 micron gold sputtered Mylar Transducer Ø - 25.4 mm, 1 in Polar pattern (Dual Output Mode) Polar pattern (Multi-Pattern Mode) - Create any polar pattern in post-production omni, wide cardioid, cardioid, supercardioid, figure-8 Sensitivity - 31.4 mV/Pa, -30.1 dBV/Pa (cardioid) 30.3 mV/Pa, -30.3 dBV/Pa (omni) 34.1 mV/Pa, -29.4 dBV/Pa (figure-8) Equivalent noise level - 10 dB (A), cardioid Max. SPL for 0.5 % THD - 134 dBSPL, 0 dB pre-attenuation Signal / noise ratio - 84 dB (A) Dynamic range - 124 dB (A) Pre-attenuation pad - 0 dB -6 dB -12 dB -18 dB Low-cut filter - linear 40 Hz (12 dB/oct) 80 Hz (12 dB/oct) 160 Hz (6 dB/oct) Internal impedance - 110 Ω Rated load impedance - 1,000 Ω Supply voltage - 48 V ± 4 V Current consumption - 5.1 mA Mic enclosure - Zinc die cast Connector - Gold plated 3-pin XLR + Mini 3-pin XLR Microphone dimensions - 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in Microphone net weight - 425 g

Lewitt LCT 940 Authentica Rør ...

19.999,-

Lewitt LCT 940 Premium large-diaphragm FET condenser microphone and top-notch tube mircophone in a single housing. Blend the two independent characteristics for unlimited possibilities. Tube and FET microphone in one housing Blend tube and FET circuit at any ratio Studio centrepiece 12AX7 tube Remote control and power supply in one Multi-pattern design Included: Shock mount, LCT 40 Wxx, 11-pin audio cable The LCT 940 unifies the specific characteristics of a premium large diaphragm FET condenser microphone and a top-notch tube microphone. With "Tube" you get warmth and musical harmonics, while "FET" gives you clear and nuanced sound. Blend tube and FET circuit at any ratio and find your ideal mix. The LCT 940 features a total of nine different polar patterns. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Transducer Ø - 25.4 mm, 1 in Polar pattern - Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns Frequency range - 20 ... 20,000 Hz Sensitivity - 23 mV/Pa, -33 dBV/Pa (cardioid) 20 mV/Pa, -34 dBV/Pa (omni) 23 mV/Pa, -33 dBV/Pa (figure-8) Equivalent noise level (FET) - 8 dB (A), cardioid 9 dB (A), omni 8 dB (A), figure-8 Equivalent noise level (Tube) - 12 dB (A), cardioid 13 dB (A), omni 12 dB (A), figure-8 Max. SPL for 0.5 % THD (FET) - 143 dBSPL, 0 dB pre-attenuation Max. SPL for 0.5% THD (Tube) - 140 dBSPL, 0 dB pre-attenuation Signal / noise ratio (FET) - 86 dB (A) Signal / noise ratio (Tube) - 82 dB (A) Dynamic range of FET mic. Amp. - 135 dB Dynamic range of Tube mic. Amp. - 128 dB Pre-attenuation pad - 0 dB -6 dB -12 dB -18 dB Low-cut filter - linear 40 Hz (12 dB/oct) 150 Hz (6 dB/oct) 300 Hz (6 dB/oct) Internal impedance - 200 Ω Rated load impedance - 1,000 Ω PSU - supply voltage - 230 V, 50 Hz 110 V, 60 Hz Current consumption - 170 mA Connector - Gold plated 11-pin XLR Microphone dimensions - 192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in PSU dimensions - 250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in Microphone net weight - 662 g, 23.3 oz PSU net weight - 1,930 g

Lewitt LCT540S ...

7.390,-

Lewitt LCT540S Cutting-edge 1" studio microphone for ultra-detailed recordings. 1" true condenser studio microphone Self-noise below the threshold of human hearing Ideal for extreme processing Low-cut filters and attenuation Cardioid polar pattern Included: Shock mount, Magnetic pop filter, Windscreen, Transport bag With its cutting-edge circuit and capsule design, the LCT 540 S features an impressive dynamic range of 132 dB to capture everything from loud to subtle. You won’t hear the self-noise of the mic even after heavily compressing the signal. Material recorded with the LCT 540 S is fit for extreme processing. Acoustical operating principle - Pressure gradient transducer, externally polarized Transducer Ø - 25 mm, 1 in Polar pattern - Cardioid Sensitivity - 41 mV/Pa, -28 dBV/Pa Equivalent noise level - 4 dB (A) Max. SPL for 0.5 % THD - 136 dBSPL, 0 dB pre-attenuation Signal / noise ratio - 90 dB (A) Dynamic range - 132 dB (A) Pre-attenuation pad - 0 dB -6 dB -12 dB Low-cut filter - linear 80 Hz (6 dB/oct) 160 Hz (6 dB/oct) Internal impedance - 68 Ω Supply voltage - 48 V ± 4 V Current consumption - 3.6 mA Mic enclosure - Zinc die cast Connector - Gold-plated 3-pin XLR Microphone dimensions - 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in Microphone net weight - 371 g

Lewitt MTP 250 DM Dynamisk ...

1.099,-

Lewitt MTP 250 DM Handheld dynamic microphone with cardioid pattern. Dynamic vocal microphone Tailored vocal sound Durable materials for longevity Cardioid polar pattern Switch version available The MTP 250 DM is your first-choice handheld microphone for onstage applications. The frequency response of the high-performance capsule is tailored specifically for your vocals. Your voice will cut through the mix in any live environment. The stage is yours. Acoustical operating principle - Dynamic, moving coil Polar pattern - Cardioid Frequency range - 60 ... 18,000 Hz Sensitivity - 2 mV/Pa, -54 dBV/Pa Internal impedance - 280 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Microphone dimensions - 49 dia. x 170 mm, 1.9 dia. x 6.7 in Microphone net weight - 300 g

Lewitt MTP 250 DMs Dynamisk ...

1.149,-

Lewitt MTP 250 DMs Handheld dynamic microphone with cardioid pattern. Switch version. Dynamic vocal microphone with switch. Tailored vocal sound Durable materials for longevity Cardioid polar pattern The MTP 250 DM is your first-choice handheld microphone for onstage applications. The frequency response of the high-performance capsule is tailored specifically for your vocals. Your voice will cut through the mix in any live environment. The stage is yours. Acoustical operating principle - Dynamic, moving coil Polar pattern - Cardioid Frequency range - 60 ... 18,000 Hz Sensitivity - 2 mV/Pa, -54 dBV/Pa Internal impedance - 280 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Microphone dimensions - 49 dia. x 170 mm, 1.9 dia. x 6.7 in Microphone net weight - 300 g

Lewitt MTP 350 CM Kondensator ...

2.079,-

Lewitt MTP 350 CM Professional handheld microphone with condenser capsule for highly detailed sound. Condenser vocal microphone Clear and precise condenser sound Durable materials for longevity Cardioid polar pattern Switch version available Included: Microphone clip, Transport bag Our MTP 350 CM provides rich and detailed condenser sound. Its tailored frequency response allows maximum precision and unsurpassed clarity, taking your vocals to the next level. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Polar pattern - Cardioid Frequency range - 90 ... 20,000 Hz Sensitivity - 3.1 mV/Pa, -50 dBV/Pa Equivalent noise level - 25 dB (A) Maximum SPL - 141 dB, 1% THD Internal impedance - 200 Ω Rated load impedance - 1,000 Ω Supply voltage - 48 V ± 4 V Current consumption - 5.3 mA Connector - Gold plated 3-pin XLR Microphone dimensions - 49 dia. X 175 mm, 1.9 dia. X 6.9 in Microphone net weight - 330 g

Lewitt MTP 350 CMs ...

2.079,-

Lewitt MTP 350 CMs Professional handheld microphone with condenser capsule for highly detailed sound. Switch version. Condenser vocal microphone witch switch. Clear and precise condenser sound Durable materials for longevity Cardioid polar pattern Included: Microphone clip, Transport bag Our MTP 350 CM provides rich and detailed condenser sound. Its tailored frequency response allows maximum precision and unsurpassed clarity, taking your vocals to the next level. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Polar pattern - Cardioid Frequency range - 90 ... 20,000 Hz Sensitivity - 3.1 mV/Pa, -50 dBV/Pa Equivalent noise level - 25 dB (A) Maximum SPL - 141 dB, 1% THD Internal impedance - 200 Ω Rated load impedance - 1,000 Ω Supply voltage - 48 V ± 4 V Current consumption - 5.3 mA Connector - Gold plated 3-pin XLR Microphone dimensions - 49 dia. X 175 mm, 1.9 dia. X 6.9 in Microphone net weight - 330 g

Lewitt MTP 440 DM Dynamisk ...

1.220,-

Lewitt MTP 440 DM Dynamic instrument microphone with transparent and punchy sound. Lively and punchy sound Works great for snare and amps Durable materials for longevity Cardioid polar pattern Included: Microphone clip, Transport bag MTP 440 DM is tailored for your snare drum, wind instrument, or amp. It features a high-performance capsule that delivers remarkable sound, live and in the studio. Type - Dynamic, moving coil Acoustical operating principle - Pressure gradient transducer Polar pattern - Cardioid Frequency range - 60 ... 16,000 Hz Sensitivity - 2.5 mV/Pa, -52 dBV/Pa Internal impedance - 500 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Microphone dimensions - 39 dia. x 159 mm, 1.53 dia. x 6.25 in Microphone net weight - 280 g

Lewitt MTP 550 DM Dynamisk ...

1.439,-

Lewitt MTP 550 DM Dynamic handheld microphone with high gain before feedback, low handling noise, zero hassle. Cardioid pattern. Dynamic vocal microphone Tailored vocal sound Highly feedback proof Durable materials for longevity Cardioid polar pattern Included: Microphone clip, Transport bag MTP 550 DM is our answer to end all your feedback issues. Its very consistent cardioid polar pattern suppresses sound coming from your stage monitors. Always clear, powerful sound, for yourself on stage and for your audience. Type - Dynamic, moving coil Acoustical operating principle - Pressure gradient transducer Polar pattern - Cardioid Frequency range - 60 ... 16,000 Hz Sensitivity - 2 mV/Pa, -54 dBV/Pa Internal impedance - 300 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Microphone net weight - 381 g, 13.4 oz Microphone dimensions - 49 dia. x 170 mm

Lewitt MTP 550 DMs Dynamisk ...

1.439,-

Lewitt MTP 550 DMs Dynamic handheld microphone with high gain before feedback, low handling noise, zero hassle. Cardioid pattern and switch. Dynamic vocal microphone with switch. Tailored vocal sound Highly feedback proof Durable materials for longevity Cardioid polar pattern Included: Microphone clip, Transport bag MTP 550 DM is our answer to end all your feedback issues. Its very consistent cardioid polar pattern suppresses sound coming from your stage monitors. Always clear, powerful sound, for yourself on stage and for your audience. Type - Dynamic, moving coil Acoustical operating principle - Pressure gradient transducer Polar pattern - Cardioid Frequency range - 60 ... 16,000 Hz Sensitivity - 2 mV/Pa, -54 dBV/Pa Internal impedance - 300 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Microphone net weight - 381 g, 13.4 oz Microphone dimensions - 49 dia. x 170 mm

Om oss

Meny

Totalt:

Søkeresultater

Mikrofoner

Totalt:

El.gitarer

Type/Modell

Stålstrengs gitarer (Western)

Nylonstrengs gitarer (Klassisk)

Forsterkere

Produsent

Effekter og pedaler

Produsent

Dunlop

Type

Rekvisita og Tilbehør

Reimer

Strenger

Bass Forsterkere

Bass Rekvisita

Bassgitarer

Perkusjon

Skarptrommer

Cymbaler

Hardware/Stativer

Basstrommepedaler

Trommeskinn

Evans

Remo

Stikker m.m.

Aktiv PA

Lydkort

Studio Monitorer