Peavey 6505 Head ...

13.450,-

Peavey 6505® Head Mean and powerful. The 6505 defines the sound of modern heavy rock music. Named in celebration of Peavey's first 40 years, the 6505 is the undisputed go-to guitar amplifier for scores of rock, hardcore and metal bands for its two channels of raw tone, relentless power and road-proven reliability. The 6505 is the unquestionable choice for an ever-expanding list of players and endorsers. Featuring five 12AX7 preamp tubes and four 6L6GC power amp tubes, with presence and resonance controls and three-band EQ. Specifications High and low gain inputs 120 watts (rms) into 16, 8, or 4 ohms (switchable) 2-channel preamp switchable on front panel or remote footswitch Rhythm channel: pre-/post-gain, bright and crunch switches Five 12AX7 preamp tubes and four 6L6GC power amp tubes Channels share 3-band EQ Presence and resonance controls Switchable post-EQ effects loop Preamp output Footswitch included Lead channel: pre-/post-gain Weight: 48.00 lb(21.772 kg)

Peavey 6505 Plus Head ...

14.450,-

Peavey 6505® Plus Head w/footswitch The ultimate rock, hardcore and metal amplifier with its raw tone, relentless power and road-proven reliability. Whenever it seems that heavy rock has been taken to the limit, a new generation comes along and redefines "heavy." The sound of modern metal sets a new standard for brutality and aggression, and to realize this sound, the bands that have led the modern metal movement for the last two decades have turned to the 6505-series for its raw tone, relentless power and road-proven reliability. The 6505 Plus features six 12AX7 preamp tubes and four 6L6GC power amp tubes, with presence and resonance controls and three-band EQ for taming it´s notorious brutal tone. Features Six 12AX7 preamp and four 6L6GC power amp tubes Footswitchable Lead/Rhythm channel select Three-band EQ on each channel Resonance and Presence controls on each channel Pre Gain and Post Gain on each channel Footswitchable Crunch boost on Rhythm channel Bright switch on Rhythm channel Preamp output Effects loop Bias test point Footswitch included 120 watts RMS into 16, 8 or 4 ohm Weight: 48.30 lb(21.908 kg)

Peavey 6505MH Mini Head ...

8.450,-

Peavey lanserte i 1992 en forsterker som den dag i dag anses for å være den ultimate rock- og metal-forsterkeren, nemlig Edvard Van Halens signaturmodell 5150. Snart 25 år etterpå er lyden den samme, men innpakningen og ikke minst fleksibilitet og funksjoner har forandret seg. To kanaler som drives av tre stk. 12AX7 forforsterkerrør og et sluttrinn med to stk. EL84-rør gir 20 watt med klassisk EVH-lyd. Effekten kan settes til 20 watt, 5 watt eller 1 watt - og er ikke det lavt nok volum kan du slå av høyttalerutgangen og kun benytte den mikrofonsimulerte utgangen (MSDI) på balansert XLR eller hodetelefon. Det samme signalet kan også sendes via USB til PC/Mac. Kanal, gain-boost på Rhythm-kanalen, romklang og effektsløyfe kan styres via fotbryter. Dette er kanskje markedets mest fleksible forsterker enten du er på scenen, i studio eller på soverommet. Liten forsterker - stor lyd! 2x EL84 power tubes and 3x12AX7/ECC83 preamp tubes Two footswitchable channels with 3-band EQ Footswitchable crunch on Rhythm channel Footswitchable reverb Footswitchable buffered effects loop Tube Status indication (T.S.I.™) circuit Impedance switch for 16 or 8ohm cabinets MSDI™ Output with XLR and ground lift switch USB output Speaker defeat switch Headphone output Attenuator switch for 20 watts, 5 watts, or 1 watt output power Mål (HxBxD): 185mm x 356mm x 197mm (høyde inkluderer føtter og håndtak) Vekt: 8 kg  

Peavey Classic 20 Mini Head

8.395,-

Peavey Classic 20 Mini Head 2-channel 20-Watt all tube Mini-Head with microphone Simulated Direct ouput via XLR or USB. Revered by blues, country and rock players alike, Peavey Classic amps span the tonal landscape from vintage to contemporary with ease, and the Classic 20 MH provides that tone in a highly portable package. The all-tube, 20-Watt Classic 20 MH is powered by two EL84 power tubes and 3 12AX7/ECC83 preamp tubes. It has two channels that follow the same gain structure and voicing of the Peavey Classic series amps for pure and versatile tone. The channels share a three-band EQ, lush reverb and an effects loop. The channels, effects loop and reverb are all footswitchable. Peavey's TSI™ tube monitoring alerts players of power tube status, and in the event of a necessary tube replacement, identifies which tube needs to be replaced. Rear panel features such as a Microphone Simulated Direct Interface (MSDI™) with XLR output and USB out, speaker defeat switch and 3 position power attenuator switch make the Classic 20 MH mini head perfect for studio environments. Specifications: Attenuator switch for 20 watts, 5 watts or 1 watt output power Two EL84 power tubes and three 12AX7/ECC83 preamp tubes Two footswitchable channels with 3-band EQ Footswitchable global volume boost, reverb, and effects loop Footswitch included Tube Status Indication (T.S.I.™ circuit MSDI™ Output with XLR and ground lift switch USB Output Speaker defeat switch Headphone output. Footswitch included Impedance switch for 16 or 8 ohm cabinets Weight: 16.75 lb(7.6 kg)

Peavey Invective 120 Head

22.995,-

Peavey Invective 120 Head Designed in collaboration with Periphery's Misha Mansoor, this 120W powerhouse will help players achieve the most revered metal sounds, from clean to the most extreme of high-gain tones. Guitarists with heavier tastes looking for their next upgrade will find a sturdy solution in the new Peavey® invective.120 Head. This multi-channel amp head is perfectly suited for players to achieve the most revered metal sounds, from woody and clean to the most extreme of high gain tones. A tube amp only sounds as good as what's inside, and Peavey's invective.120 delivers quality with four matched JJ 6L6GC output tubes with top-loaded bias test points and adjustment. On the rear panel, players will find paralleled speaker outputs with impedance selector, an MSDI direct output with Level/Tone/Ground Lift, MIDI out/thru, and MIDI footswitch input. The included footswitch has nine presets to further help the player achieve their desired tone. A remote switchable rack loop and effects loop, half-power switch, and two 9VDC at 500mA auxiliary power jacks complete the back panel. On the front panel, even more options and advanced control features are available. The invective.120 Head has a single input with four key channels: Clean channel with boost drive and tone; (very) Clean channel with gain/low/mid/high/post; Lead/Crunch channel input with muting gate threshold; and Lead/Crunch channel with boost level and tone. All channels, as well as the channel select with bullet LEDs, are remote switchable. Both the Lead and Crunch channels have independent pre- and post-gain controls as well as shared low/mid/high EQ. The standby and power switches with blue jeweled pilot light indicate when the amp is ready. Just adjust the Master Resonance, Presence and Volume knobs, and it's ready to rock. Specifications: Single input Master Resonance Master Presence Master Volume Shared Low/Mid/High EQ on Lead/Crunch channels Power and Standby switches MIDI / Footswitch Input MIDI Out/Thru 2 x 9VDC at 500mA Auxiliary power jacks Rack Loop (remote switchable) Independent Pre and Post Gain controls on Lead and Crunch channels Effects Loop (remote switchable) Lead/Crunch channel Boost Level & Tone (remote switchable) MSDI Direct Output with Level/Tone/Ground Lift Lead/Crunch channel input muting Gate Threshold (remote switchable) Paralleled speaker outputs with Impedance Selector Channel select with "bullet" LEDs (remote switchable) Half Power switch Clean channel Gain/Low/Mid/High/Post - VERY CLEAN 4 Matched JJ6L6GC output tubes Clean channel Boost Drive & Tone (remote switchable) Top-loaded bias test points and adjustment Blue Jeweled Pilot Light

Peavey Invective Mini Head ...

9.595,-

Peavey Invective Mini Head, Amplifier The best tones from its Invective big brother in a portable 20 W mini head format. In a second collaboration with Periphery guitarist, Misha Mansoor, the new invective™.MH amplifier packs all of the best tones from its 120 W big brother into a much more portable 20 W mini head format. At the heart of this little monster is a pair of EL84 power tubes shaped by three 12AX7/ECC83 preamp tubes, providing everything from pristine cleans to the infinitely chunky gated d’jent destruction. The many features of the invective.MH will satisfy even the most discerning of gear heads. The onboard T.S.I.™ (Tube Status Indication) circuit helps the user diagnose a problem with the power tubes. The bias adjustment pot is located on the top of the small, rugged chassis. Additionally, foot switches allow the invective.MH to engage or disengage the Tight voicing and any combination of Gate and Boost on the Lead channel, respectively. There’s also an independently foot-switchable buffered effects loop. In addition to the great sounds, the invective.MH has all of the recording hooks and flexibility of the other Peavey MH amplifiers, including MSDI™ (Microphone Simulated Direct Interface) Output with XLR and ground lift switch, speaker-simulated USB, speaker defeat switch, power attenuator, headphone out, and more. No matter the venue, this mini amplifier has plenty of oomph for small-to-medium sized gigs and can even work as a backline stage monitor with its attenuator switch directing power at 20 W, 5 W, or 1 W to suit the need. 20 watt (5 watt or 1 watt with power attentuator) Power attentuator EL 84 power tubes, 12AX7/ECC83 preamp tubes 2 Channels Clean channel with high & low EQ Lead channel with 3-band EQ, Tight-mode, Gate & Boost Master Resonance & Master Precence Buffered effect loop XLR DI output (Microphone simulated direct interface) TSI (Tube Status Indicator) Speaker defeat switch Headphone out Footswitch included