Aim Audio ORBIT Shockmount

995,-

Aim Audio ORBIT Custom Shockmount Kit Many years in development, the Aim team precisely worked out how to make the ultimate mounting solution for our mics. But we went even further than that and came up with something really special. All Aim Audio mics are equipped with an integral direct-to-stand mount thread in the base of the microphone, which makes setting up in tight spaces a breeze. Plus, Aim’s custom capsule holder is also made from an anti-vibration synthetic rubber material, rather than a rigid plastic that’s used in many other mics. However, for the absolutely best shock-mounting experience and if you want additional mounting options, we’ve developed the ORBIT, our revolutionary and patented multi-position Shock Mount system, along with the SENTRY Magnetic Pop Filter as part of the kit. Main Features • The Ultimate Shock-Mount System for Aim Audio Mics • Easy to set up, mics just securely slide in and you're done • Open front design, for ease of control and getting closer to sources • Patented 190 degree adjustment angle of the mounting position, makes positioning a breeze • Custom non-sagging Lyres, achieves superb rumble attenuation • Removable cable relief clip, keeps things tidy but also helps reduce cable-borne rumble • Magnetic Resorber Ring, reduces resonances • Reversible SENTRY Magnetic Pop Filter, perfectly aligns with capsule • Acid etched holes in coated stainless steel filter, directs airflow to catch plosives and avoid loss of HF • Made from long Glass-Reinforced Nylon, making it lightweight and virtually indestructible Innovate, not imitate We’ve all been there - with many shock-mount designs they are fiddly to setup, hard to adjust and a pain getting the exact angle you need for the mic to be pointed at your source. Not to forget, with some of these classic designs, you also don’t always have the confidence that your precious mic is secured firmly. Well ORBIT is no ordinary shock mount and as it is so easy to use and setup, you’ll wonder what you ever did without it. Take the Shock Made from extremely strong Long Glass Reinforced Nylon, ORBIT is lightweight and very simple to use. Just like with our microphones, ORBIT has had years of development in working out how to make a better shockmount system. In addition, to get closer to sound source and to make the controls on the microphone easily accessible (especially when the mic is in the cradle), we settled on a half-open/open front design. After very many man hours of physical testing, we also chose to not use regular rubber-band style of elastics that can sag over time and also introduce all sorts of resonances. Instead, we developed our own solid nylon based Lyres to afford the best shock-mounting possible. With our patented mechanism, you can easily change the angle of the mounting position by 190 degrees, to suit whatever direction you want to ‘Aim’ the capsule at. Side mounting, front, back or any position in between, the twist clamp mechanism can be operated single-handedly, while the mic stays secure in the custom clamp. This also makes ORBIT great for overheads or for miking up amps etc. In addition, the integrated removable cable relief clip helps to reduce rumble and handling noise. Top out the POPs Aim mics have a great integrated dual Steel Mesh pop filter, but to help catch the very worst plosives we developed the SENTRY Pop Filter. The pop filter itself is made with a coated stainless steel, with acid-etched hexagonal holes that have been aligned precisely. These holes and the distance between the filter and capsule have been specifically worked out to give the best airflow, all helping to catch great vocals, with an acoustic performance that’s perfect for plosive control. SENTRY’s surface area also curves around the microphone, so movement should not be an issue, all helping you to achieve the best vocal tracking experience you can. Easy to place, SENTRY uses custom integrated magnets in four positions. These feature a very high quality localised magnetism to ensure it doesn’t interfere with the microphone’s electronics and means that it will always stay exactly where you put it. A number of shockmounts on the market have their own resonance that can get into recordings. ORBIT is open at the front, for control access, plus as ORBIT is designed to be lightweight yet extremely strong, we used new materials which meant there can be some small unavoidable resonances. However, with the SENTRY installed, these are completely cancelled out. But for those times when you don’t need a pop filter, we developed the Magnetic Resorber Ring. This just drops onto the top when not using the SENTRY - the magnets will do the rest for you and help to give the best audio performance. ORBIT Specs Compatibility: Aim INSPIRE, Aim ESSENCE SENTRY Pop Filter Attachment: 4x localised Neodymium Magnets Mounting Options: Brass insert directly screws to a regular 5/8″-27 microphone stand. Accessories Supplied*: Brass 3/8″(9.5mm)-16 thread adaptor (*excl. Americas), branded Velcro cable tie

Audio Technica AT-8539 ...

2.349,-

Audio-Technica Powermodul InLine m/HIROSE kontakt Phantom AT-8539. Phantom (kun) powermodul. Input på Hirose konnektor for alle wireless essentials mikrofoner. Passer for AT-892 MicroSet®, med basskutt. Passer også for alle Audio-Technica Wireless Essentials® mikrofoner med 4-pin Hirose konnektor.

DPA CM2218B00 Miniature ...

457,-

Kraftigere kabel for DPA miniatyr og 4099 mikrofoner. Micro Dot til Micro Dot Heavy-duty, miniature microphone cable, 2.2 mm diameter, MicroDot connector. Comes in four lengths: 1.8 m (5.9 ft), 5 m (16.4 ft), 10 m (32.8 ft) and 20 m (65.6 ft). 1.8 m (5.9 ft) is available in black only. 5 m, 10 m and 20 m is available in black and white.

DPA d:vote BC4099 Bass Clip ...

532,-

  DPA Microphones 4099 Bass Clip Holder for d:vote 4099 mikrofoner til kontrabass Den skånsomme holderen festes på E- og G-strengene under stolen noe som sikrer optimal plassering av mikrofonen. Den myke holderen kan også bøyes til å festes i F-hullene.

DPA d:vote CC4099 Cello Clip ...

532,-

DPA Microphones 4099 Cello Clip Holder for d:vote 4099 mikrofoner til cello Den skånsomme holderen festes på C- og A-strengene under stolen noe som sikrer optimal plassering av mikrofonen.

DPA d:vote GC4099 Guitar Clip ...

532,-

GC4099 er en holder til gitar for d:vote 4099 mikrofoner. Den passer også fint til mange mandoliner, ukuleler, dobroer og lignende DPA Microphones GC4099 Guitar Clip Den svært skånsomme holderen passer til instrumenter som har en dybde som er mellom 35mm og 122mm og vil ikke ødelegge finishen på instrumentet.      

DPA d:vote GE4099 Gooseneck ...

1.247,-

GE4099 er en svanehalsforlenger til d:vote 4099 serien GE4099 Gooseneck Extention 80mm for d:vote Den kan være nyttig for eksempel hvis man spiller med mute på messingblåsere. Den forlenger med 8cm.

DPA d:vote PC4099 Piano Clip ...

532,-

PC4099 er en holder til piano for d:vote 4099 mikrofoner DPA Microphones PC4099 Piano Clip Dette er en holder med kraftig magnet som gjør at den kan brukes på mye mer enn bare piano og flygel. Den er svært lett å plassere og skader heller ikke finishen i instrumentet.

DPA d:vote STC4099 ...

532,-

STC4099 er en holder for d:vote 4099 mikrofoner til saksofon og trompeter DPA Microphones STC4099 Sax/Trumpet Clip Den skånsomme holderen kan lett flyttes med en hånd mellom forskjellige instrumenter men holder seg samtidig godt på plass når den er plassert.

DPA d:vote UC4099 Universal ...

532,-

UC4099 er en holder for d:vote 4099 mikrofoner DPA Microphones UC4099 Universal Clip Det er en universalholder med borrelås for tynnere instrumenter av varierende størrelse og diameter. Den passer for eksempel til fløyte, fagott, klarinett, obo og mye annet.

DPA d:vote VC4099 Clip for ...

532,-

VC4099 er en holder til fele for d:vote 4099 mikrofoner. Den passer også til mange mandoliner, bratsjer og banjoer. Holderen er også utmerket å bruke på basstromme DPA Microphones VC4099 Violin Clip Den svært skånsomme holderen passer til instrumenter som har en dybde som er mellom 35mm og 55mm og vil ikke ødelegge finishen på instrumentet.

DPA UA0896 Vindhette for ...

260,-

UA0896 Windscreen The UA0896 is designed for microphones with Ø19 mm (0.75 in) housings. It is well suited for outdoor applications and for speech and singing at close distances.

Lewitt LCT 40 M2 Stereoskinne

370,-

Lewitt LCT 40 M2 LCT 40 M2 Stereo bar for accurate positioning. Compatible with 3/8" and 5/8" thread.

Lewitt LCT 40 SH Shockmount ...

477,-

Lewitt LCT 40 SH Shock mount for LCT 240 PRO/LCT 440 PURE/LCT 441 FLEX, black color.

Lewitt LCT 40 SH WH ...

488,-

Lewitt LCT 40 SH WH Shock mount for LCT 240 PRO/LCT 440 PURE/ LCT 441 FLEX, white color.

Viser 1 til 15 (av 37 produkter)