Audio Technica AE2500 ...

9.890,-

Audio-Technica Mikrofon Dynamisk/Kondensator Instrument Nyre AE2500 er en dobbel-element nyre mikrofon i Artist Elite serien, en ultimat basstromme mikrofon.. Revolusjonerende dobbel-element design, et gjennombrudd i element-teknlogi. To elementer (dynamisk og kondensator) i samme kapsling. The ultimate kick-drum mic, the Artist Elite AE2500 dual-element instrument microphone features cardioid condenser and dynamic capsules combined in one housing. The dynamic element delivers the aggressive attack of the beater; the condenser captures the round tonalities of the shell. Two layers of resistive mesh form multiple densities over the dynamic element's side-entry ports, exercising precise control over the time at which off-axis signals arrive at the diaphragm. The condenser diaphragm is optimally tensioned and aged for long-term consistency and stability. Polar Pattern: Cardioid Frequency Response: 20-17,000 Hz (condenser) 30-10,000 Hz (dynamic) Low Frequency Roll Off: 80 Hz, 12 dB/octave (condenser) Open Circuit Sensitivity: -51 dB (2.8 mV) re 1V at 1 Pa (condenser) -54 dB (1.9 mV) re 1V at 1 Pa (dynamic) Impedance: 100 ohms (condenser) 600 ohms (dynamic) Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser); 158 dB SPL, with 10 dB pad (nominal) Dynamic Range: 124 dB, 1 kHz at Max SPL (condenser) Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa (condenser) Phantom Power Requiremens: 11-52V DC, 3 mA typical (condenser) Weight: 13.8 oz (390 g) Dimensions: 6.50" (165.0 mm) long, 2.17" (55.0 mm) maximum diameter Output Connector: Integral 5-pin XLRM-type Cable: 16.5 (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors Accessories: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

DPA d:dicate 4090 ...

8.440,-

DPA Microphones 4090 Omnidirectional Microphone Høykvalitets kondensatormikrofon med kulekarakteristikk. På grunn av dens enestående naturlige og åpne lyd er 4090 velegnet til oppmikking av instrumenter i studio og på scenen. Mikrofonen håndterer 134dB SPL og kan benyttes med stort sett alle instrumenter, fra akustisk gitar og strykere til piano og blås. Den bemerkelsesverdig lineære frekvensresponsen fra 20 Hz til 20 kHz gjør også at mikrofonen er ytterst velegnet til å teste, trimme og kalibrere lydsystemer. Det robuste og kompakte designet benytter en 5,4 mm forpolarisert kondensatorkapsel i et kjegleformet hus som er 12 cm langt. Maks. SPL: 134 dB Følsomhet, nominell, ±3 dB: 20 mV/Pa; -34 dB re. 1 V/Pa    

DPA d:dicate 4091 ...

8.440,-

DPA Microphones 4091 Omnidirectional Microphone Høykvalitets kondensatormikrofon med kulekarakteristikk. På grunn av dens enestående naturlige og åpne lyd er 4091 velegnet til oppmikking av instrumenter i studio og på scenen. Mikrofonen håndterer hele 144dB SPL og mestrer stort sett alle utfordringer, fra oppmikking av gitar- og basskabinett til trommer. 4091 er en utmerket mikrofon til slagverk, og dessuten et ideelt valg til blås og strykerinstrumenter. Den bemerkelsesverdig lineære frekvensresponsen fra 20 Hz til 20 kHz gjør også at mikrofonen er ytterst velegnet til å teste, trimme og kalibrere lydsystemer. Det robuste og kompakte designet benytter en 5,4 mm forpolarisert kondensatorkapsel i et kjegleformet hus som er 12 cm langt. Maks. SPL: 144 dB Følsomhet, nominell, ±3 dB: 6 mV/Pa; -44.5 dB re. 1 V/Pa

Røde NT3 Kondensatormikrofon ...

3.495,-

RØDE NT3 er en elegant og moderne studio, scene og video/radio mikrofon, med den aller nyeste teknologien. NT3 er laget med de beste komponentene for å gjøre jobben enkel for lydteknikkeren, så vel som musikeren. Når NT3 også har et utrolig lavt støynivå, skjønner man at det er en av de aller beste mikrofonene på markedet. NT3 kan drives med batteri og fantommating. True condenser externally biased 3/4” capsule Dual power operation Cast metal body with durable satin-nickel finish Transformerless output Internal capsule shock mounting High level of RF rejection Audio-grade surface mount components Full frequency response 10 year extended warranty when you register your microphone The NT3 is the definition of a studio workhorse. Featuring an end-address 3/4" gold-sputtered true-condenser transducer it provides incredible detail on almost any instrument you can imagine. Intended for studio, stage and location work, this versatile handheld, stand or boompole mounted microphone will give great results on drums, percussion, acoustic guitar, guitar amps, piano and all acoustic instruments as well as detailed voice reproduction when used as a handheld presentation microphone or indoor boom mic. For further versatility the NT3 can be powered by either P48 phantom power, or via a 9V battery for situations when power isn't available via the console or camera. Its rugged and durable all-metal body and mesh head ensure that it is well protected both in the studio and out in the field. The RØDE NT3 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty. NT3 Specifications   Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.75" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 140dBSPL Maximum Output Level 9.5mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 16dBA Power Options Weight 371.00g Dimensions 206.00mmH x 32.00mmW x 32.00mmD Output   Save

Røde NT4 Stereomikrofon ...

7.695,-

Stereomik i studioklasse. Røde NT4 er en stereo kondensator i studioklasse, komplett med hardcase, stativ, vindhetter og spesialkabler som inkluderer både XLR og minijackkontakter. Dette gjør NT4 til en fleksibel mikrofon som kan kobles direkte til de fleste apparater i et studioopptak, TV/Videoproduksjon, trommeoverhead. NT4 har to 1/2 ”kapsler med 90 grader, XY plassering. Drives med 48V fantommating eller 9V batteri. NT4 er utmerket ved rom og ambientinnspillinger. Stereo X/Y condenser microphone Dual externally biased 1/2” capsules with gold sputtered diaphragm Capsules closely matched with full frequency response Dual power operation Custom stereo cables included - 5 pin stereo XLR, Minijack (Via included cable) and dual 3-pin XLR (via included cable) Custom twin head windshield (WS4) included Includes custom twin head windshield WS4, RC4 case and 5-pin Minijack and XLR stereo cables Surface mount circuitry 10 year extended warranty when you register your microphone The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone. Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field. The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera. The RØDE NT4 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty. NT4 Specifications   Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 143dBSPL Maximum Output Level 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 16dBA Power Options Weight 480.00g Dimensions 231.00mmH x 61.00mmW x 33.00mmD Output

Røde NT6 Kondensatormikrofon

5.595,-

Problemløser ved filminnspilling RØDE NT6 er en meget liten og diskre 1/2” ekte kondensatormikrofon, spesielt designet som en problemløser ved vanskelig oppmikkinger. Kapselen er skilt fra preampdelen med en 3meter kevlarforsterket kabel. NT6 brukes der en kraftfull med diskre mikrofon trengs. Bryter for 80Hz high-pass filter og 0/-10dB demping. 1/2” condenser capsule with remote preamp Gold sputtered externally biased condenser Two position PAD - 0dB and -10dB Two position High Pass Filter - flat and 80Hz Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch Heavy duty satin-nickel plated body Low noise and full frequency response Designed and manufactured in Australia 10 year extended warranty when you register your microphone The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required. Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording. The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable. Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation. The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources. The NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2. The NT6 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty. NT6 Specifications   Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Address Type End Frequency Range 40Hz - 20kHz Output Impedance 200Ω Maximum SPL 135dBSPL Maximum Output Level 6.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 19dBA Power Options Weight 386.00g Dimensions 189.00mmH x 64.00mmW x 20.00mmD Output   Save

Sennheiser e865 Vokalmikrofon ...

2.990,-

Kondensator Vokal Mikrofon e 865 Electret condenser microphone with super-cardioid pickup. Rugged, for live performance and lead vocals with natural, detailed sound. Sensitive to the slightest nuances. Precise reproduction for moderators and speakers. Sensitive to every nuance – and tough on the road. No matter whether it's quiet or loud, far away or right up close: the e 865 makes every tone worth its weight in gold. The entry into the condenser class can be heard immediately. The highly sensitive membrane picks up the finest vocal nuances and transmits even extreme dynamics into the signal chain with ease. Even if the lips are some distance from the capsule, the e 865 delivers consistent sound quality. It combines the professional options of the condenser capsule with the rugged design of the 800 series. On the one hand, this is: studio sound, even for demanding live gigs. And, on the other: a special class for moderators and speakers that allows precise reproduction, even of plosive sounds. The S-version of the e 835 comes with a noiseless on/off switch. Features Super-cardioid condenser microphone for speech and vocals Natural reproduction with emphasized presence Consistent sound quality (varying distances, moving off axis) Distortion-free reproduction even at very high sound pressure levels Optional silent on/off switch Excellent feedback rejection High handling noise rejection Rugged metal housing Technical Data   Switch On/Off 004847 Dimensions Ø 47 x 193 mm   Connector XLR-3   Frequency response (microphone) 40 - 20000 Hz   Transducer principle (Microphone) pre-polarised condenser microphone   Weight 311 g   Pick-up pattern super-cardioid   Sensitivity in free field, no load (1kHz) 3 mV/Pa   Nominal impedance 200 Ω   Min. terminating impedance 1000 Ω   Phantom powering 12 - 48 V   Max. Sound pressure level (active) 150 dB   Weight w/o cable 311 g   What's in the box? 1 e 865 1 microphone clip 1 pouch