Hopp til innhold

Norsk nettbutikk | Rask levering | Frakt i hele Norge

Lyd

Lewitt LCT 440 PURE ...

2.978,-

Lewitt LCT 440 PURE Puristic 1" studio microphone with high-end components. 1" true condenser studio microphone Best in its class for vocals and instruments High-end capsule and circuit design Cardioid polar pattern Included: Shock mount, Magnetic pop filter, Windscreen, Transport bag You’ll fall in love with its larger-than-life sound and outstanding build quality right away. Its sound is specifically designed to let you perform comfortably while sounding sensational. That is possible because the LCT 440 PURE uses the same high-end components, capsule and circuit design as our prestige models. Nothing will limit your performance. It's all about pure sound, baby. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Diaphragm - 3 micron gold sputtered Mylar Transducer Ø - 25.4 mm, 1 in Polar pattern - Cardioid Sensitivity - 27.4 mV/Pa, -31.2 dBV/Pa Equivalent noise level - 7 dB (A) Max. SPL for 0.5 % THD - 140 dBSPL Signal / noise ratio - 87 dB (A) Dynamic range - 133 dB (A) Supply voltage - 48 V ± 4 V Current consumption - 2.63 mA Internal impedance - 110 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Mic enclosure - Zinc die cast Microphone dimensions - 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in Microphone net weight - 310 g
Lewitt LCT 441 FLEX ...

3.315,-

Lewitt LCT 441 FLEX Compact 1" multi-pattern microphone with high-end components. 1" multi-pattern studio microphone Pure studio sound quality Studio allrounder High-end specifications Eight polar patterns incl. three reversed ones Included: Shock mount, Magnetic pop filter, Windscreen, Transport bag The LCT 441 FLEX is a compact multi-pattern studio microphone. It features high-spec technology and eight different polar patterns. You'll be more flexible when it comes to recording different instruments or vocals. It also allows switching between high directivity or more room impression and provides freedom to experiment. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Diaphragm - 3 micron gold sputtered Mylar Transducer Ø - 25.4 mm, 1 in Polar pattern - Omni, wide cardioid, cardioid, supercardioid, figure-8, reverse cardioid, reverse wide cardioid, reverse supercardioid Sensitivity - 17.2 mV/Pa, -35.3 dBV/Pa Equivalent noise level - 7 dB (A), cardioid Max. SPL for 0.5 % THD - 144 dBSPL Signal / noise ratio - 87 dB (A) Dynamic range - 137 dB (A) Supply voltage - 48 V ± 4 V Current consumption - 4 mA Internal impedance - 54 Ω Rated load impedance - 1,000 Ω Connector - Gold plated 3-pin XLR Mic enclosure - Zinc die cast Microphone dimensions - 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in Microphone net weight - 325 g
Lewitt LCT 640 TS ...

7.790,-

Lewitt LCT 640 TS Unique 1" true condenser multi-pattern microphone to change the pattern even after the recording. 1" multi-pattern studio microphone Full, crisp, and well-balanced sound Revolutionary Dual Output Mode POLARIZER plugin to create any pattern after the fact Stereo capabilities Included: Shock mount, Magnetic pop filter, Windscreen, TS adapter cable, Transport bag The LCT 640 TS works as a traditional multi-pattern microphone, a stereo microphone, and a mic that can change the polar pattern after the fact with its Dual Output Mode. The 1" true condenser capsule and high-end specifications guarantee precise recordings. Whatever you record with the LCT 640 TS will sound incredibly detailed. Your vocals sound larger-than-life, your instruments full and vibrant. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Diaphragm - 3 micron gold sputtered Mylar Transducer Ø - 25.4 mm, 1 in Polar pattern (Dual Output Mode) Polar pattern (Multi-Pattern Mode) - Create any polar pattern in post-production omni, wide cardioid, cardioid, supercardioid, figure-8 Sensitivity - 31.4 mV/Pa, -30.1 dBV/Pa (cardioid) 30.3 mV/Pa, -30.3 dBV/Pa (omni) 34.1 mV/Pa, -29.4 dBV/Pa (figure-8) Equivalent noise level - 10 dB (A), cardioid Max. SPL for 0.5 % THD - 134 dBSPL, 0 dB pre-attenuation Signal / noise ratio - 84 dB (A) Dynamic range - 124 dB (A) Pre-attenuation pad - 0 dB -6 dB -12 dB -18 dB Low-cut filter - linear  40 Hz (12 dB/oct) 80 Hz (12 dB/oct) 160 Hz (6 dB/oct) Internal impedance - 110 Ω Rated load impedance - 1,000 Ω Supply voltage - 48 V ± 4 V Current consumption - 5.1 mA Mic enclosure - Zinc die cast Connector - Gold plated 3-pin XLR + Mini 3-pin XLR Microphone dimensions - 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in Microphone net weight - 425 g
Lewitt LCT 940 Authentica Rør ...

17.570,-

Lewitt LCT 940 Premium large-diaphragm FET condenser microphone and top-notch tube mircophone in a single housing. Blend the two independent characteristics for unlimited possibilities. Tube and FET microphone in one housing Blend tube and FET circuit at any ratio Studio centrepiece 12AX7 tube Remote control and power supply in one Multi-pattern design Included: Shock mount, LCT 40 Wxx, 11-pin audio cable The LCT 940 unifies the specific characteristics of a premium large diaphragm FET condenser microphone and a top-notch tube microphone. With "Tube" you get warmth and musical harmonics, while "FET" gives you clear and nuanced sound. Blend tube and FET circuit at any ratio and find your ideal mix. The LCT 940 features a total of nine different polar patterns. Type - Condenser, externally polarized Acoustical operating principle - Pressure gradient transducer Transducer Ø - 25.4 mm, 1 in Polar pattern - Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns Frequency range - 20 ... 20,000 Hz Sensitivity - 23 mV/Pa, -33 dBV/Pa (cardioid) 20 mV/Pa, -34 dBV/Pa (omni) 23 mV/Pa, -33 dBV/Pa (figure-8) Equivalent noise level (FET) - 8 dB (A), cardioid 9 dB (A), omni 8 dB (A), figure-8 Equivalent noise level (Tube) - 12 dB (A), cardioid 13 dB (A), omni 12 dB (A), figure-8 Max. SPL for 0.5 % THD (FET) - 143 dBSPL, 0 dB pre-attenuation Max. SPL for 0.5% THD (Tube) - 140 dBSPL, 0 dB pre-attenuation Signal / noise ratio (FET) - 86 dB (A) Signal / noise ratio (Tube) - 82 dB (A) Dynamic range of FET mic. Amp. - 135 dB Dynamic range of Tube mic. Amp. - 128 dB Pre-attenuation pad - 0 dB -6 dB -12 dB -18 dB Low-cut filter - linear  40 Hz (12 dB/oct) 150 Hz (6 dB/oct) 300 Hz (6 dB/oct) Internal impedance - 200 Ω Rated load impedance - 1,000 Ω PSU - supply voltage - 230 V, 50 Hz 110 V, 60 Hz Current consumption - 170 mA Connector - Gold plated 11-pin XLR Microphone dimensions - 192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in PSU dimensions - 250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in Microphone net weight - 662 g, 23.3 oz PSU net weight - 1,930 g
Lewitt LCT540S ...

6.350,-

Lewitt LCT540S Cutting-edge 1" studio microphone for ultra-detailed recordings. 1" true condenser studio microphone Self-noise below the threshold of human hearing Ideal for extreme processing Low-cut filters and attenuation Cardioid polar pattern Included: Shock mount, Magnetic pop filter, Windscreen, Transport bag With its cutting-edge circuit and capsule design, the LCT 540 S features an impressive dynamic range of 132 dB to capture everything from loud to subtle. You won’t hear the self-noise of the mic even after heavily compressing the signal. Material recorded with the LCT 540 S is fit for extreme processing. Acoustical operating principle - Pressure gradient transducer, externally polarized Transducer Ø - 25 mm, 1 in Polar pattern - Cardioid Sensitivity - 41 mV/Pa, -28 dBV/Pa Equivalent noise level - 4 dB (A) Max. SPL for 0.5 % THD - 136 dBSPL, 0 dB pre-attenuation Signal / noise ratio - 90 dB (A) Dynamic range - 132 dB (A) Pre-attenuation pad - 0 dB -6 dB -12 dB Low-cut filter - linear 80 Hz (6 dB/oct) 160 Hz (6 dB/oct) Internal impedance - 68 Ω Supply voltage - 48 V ± 4 V Current consumption - 3.6 mA Mic enclosure - Zinc die cast Connector - Gold-plated 3-pin XLR Microphone dimensions - 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in Microphone net weight - 371 g
LEWITT LW6 Wireless Studio ...

6.760,-

LEWITT LW6 – STUDIOLYD. UTEN KABEL.  Møt LEWITT LW6 – profesjonelle trådløse studiohodetelefoner utviklet for innspilling, monitoring, mixing, mastering og kritisk lytting. Wireless for audio professionals.LW6 Professional wireless studio headphones  Made for mixing, mastering and recording Uncompressed PCM-quality audio Ultra-low latency performance Custom EQs and virtual studio monitors Included: RealSound transmitter, Cable set, Transport pouch LW6 Wireless Studio Headphones are made for professional audio production and offer wireless freedom in the studio. They deliver uncompressed, ultra-low-latency wireless audio, perfect for mixing, mastering, and monitoring while recording. The LW6 wireless studio headphones work in the ultra-wideband range to deliver truly uncompressed PCM-audio with ultra-low latency of under 6 ms. Connect the RealSound transmitter to any headphone out or, via USB-C, directly to your computer and enjoy pristine sound quality within a range of up to 5 m / 16 ft. LW6 delivers the transparent, natural sound quality typically found only in open-back headphones, but in a closed-back design to also ensure effective noise isolation. LEWITT's enhanced measurement and tuning process involves placing microphones inside real ears, not just a head simulator. As a result, you can count on exceptional sound accuracy and fully trust what you hear. LW6 lets you track studio vocals and instruments with near-real-time monitoring without cable restriction. The passive noise isolation of the closed-back design ensures that no sound from your headphones will bleed into the mic.
Viser 301 til 315 (av 771 produkter)
  • vipps-orange.png
  • klarna-light.png
  • mastercard-full.png
  • visa.png