Blackstar FS-10 Footswitch

1.375,-

Blackstar FS-10 - Footswitch En multifunksjons fotkontroller som gir tilgang til alle 128 patcher pluss tunerfunksjonen Blackstar FS-10 - Fotbryter Designet for bruk med følgende forsterkere: Silverline Standard Silverline Special Silverline Deluxe Silverline Stereo Deluxe Silverline Deluxe Head ID:15TVP ID:30TVP, ID:60TVP ID:60TVP-H ID:260TVP ID:100TVP

Blackstar Live Logic USB Midi ...

2.095,-

Blackstar Live Logic MIDI Footcontroller Live Logic kompakt og allsidig 6-knappers MIDI-fotkontroller gir deg rask og enkel kontroll av alle MIDI-maskinvare- eller programvareplattformer og plugins. MIDI over USB, tilordnbare funksjoner og to expression-pedalinnganger gjør den til den perfekte MIDI-kontrollløsningen, og den kan også brukes som ditt USB MIDI-grensesnitt. Får strøm via USB, 9V batteri eller strømforsyning. USB MIDI Interface Bruk Live Logic som ditt USB MIDI-grensesnitt for å integrere alle ikke-USB MIDI-enheter i et USB-oppsett. Ta med enheten hvor som helst og gi strøm via USB, 9V batteri eller strømforsyning. Komplett tilpasning via Live Logic-appen Det er enkelt å tilpasse Live Logic MIDI-fotkontrolleren takket være vår gratis PC- eller Mac-app, som lar deg tilpasse funksjonen til hver fotbryter og expression-pedal og lagre og laste inn forhåndsinnstillinger for konfigurasjon. Modi for enhver situasjon Patch-modus setter opp Live Logic for å sende MIDI Program Change-meldinger. Brytere 1-4 sender Program Change-meldingen, og 5 og 6 vil Bank opp og Bank Down, perfekt for patch-bytte på Silverline-serien vår eller en hvilken som helst MIDI-aktivert forsterker. I egendefinert modus kan alle 6 bryterne konfigureres individuelt til alle typer MIDI-meldinger som kreves, enten programendring for å skifte kanal, kontrollendring for å endre individuelle parametere, note for triggering av samples eller clock for å synkronisere tempoet til flere tidsbasert utstyr. Uendelige muligheter med USB Live Logics MIDI over USB-funksjonalitet gir deg uanstrengt kraftig kontroll av DAW-er, plugins og live sequencer/sampling-programvare som Ableton Live™. Live Logic kan også brukes som ditt USB MIDI-grensesnitt for å integrere alle ikke-USB MIDI-enheter i et USB-oppsett. Designet for proft bruk hjemme eller på scenen Live Logic er et superkompakt, fullt tilpassbart kontrollgrensesnitt som er klart for konserter. Den tøffe metallkonstruksjonen med skarpe LED-er og display gjør den perfekt for hjemme- eller scenebruk. Den kan drives av 9V batteri, en ekstern 9V strømforsyning, eller til og med direkte via USB. Nøkkelfunksjoner: 6-knappers MIDI fotkontroller 2 x expression-pedalinnganger Styrer PC-, CC-, Notat- og Klokke-meldinger MIDI over USB for bruk med DAW-er og plugins PP3 batteri, 9V DC og USB-buss drevet Tilpassbare MIDI-meldinger via gratis programvare Programendringsmeldinger 0-127 / 1-128 Scenetydelig multifunksjons LED-skjerm MIDI IN, MIDI OUT og USB Dimensjoner 396 x 37 x 74 mm

EarthQuaker Devices Swiss ...

3.830,-

Swiss Things Pedalboard Reconciler EarthQuaker Devices’ Swiss Things is an all-in-one pedalboard reconciliation solution designed to really tie your rig together, without resorting to some confusing loop-switching contraption bigger than a meatball party sub (that eats up the entire bottom row of your board and kind-of-but-not-quite does what you need it to do). • All-in-one pedalboard reconciliation solution • Use EQD’s Flexi-Switch™ Technology with every pedal in your setup • Buffered tuner output • 20dB of clean boost • Expression pedal output • Quiet, high headroom output buffer • Two Flexi-Switch™ enabled effects loops • Flexi-Switch™ AB-Y box • Use as many pedals as you’d like without tone-suck • Quickly and easily bypass all pedals with one click • Use multiple amps without phase issues, ground loops, or extra noise • Eliminate volume pedal tone-suck by using any expression pedal to control volume • Improves pedalboard cable management - shortens cable runs to reduce capacitance which causes tone loss • All-analog signal path • True Bypass - with silent soft-touch switching Swiss Things combines two true-bypass Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost, an expression pedal output for volume control, and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss. The two effects loops (labelled Loop 1 and Loop 2) come equipped with EarthQuaker Devices’ proprietary Flexi-Switch™ Technology which allows latching- and/or momentary-style switching to be used with any effects pedal on the market. Loop 1 is unbuffered for use with fuzz, overdrive, distortion, boost, vintage pedals, or anything else with low input impedance and requires direct interaction with your pickups. Loop 2 is buffered and is intended for use with time-based and modulation effects. A buffered tuner output removes your tuner from the signal chain, allowing users to stay in tune without tone loss. The Volume EXP jack allows for expression pedal control of volume without volume pedal-related tone-suck and is located after the “dirt” effects loop (Loop 1) to change levels without affecting gain. Swiss Things also includes a Flexi-Switch™enabled AB-Y box with transformer isolation between outputs and a phase switch, 20dB of clean boost with adjustable gain, and a quiet, high headroom output buffer. It all adds up to a compact, pedalboard-friendly signal routing junction box that lives at the top-right corner of a pedalboard and ties the rig together without any signal loss.

Fulltone ABY Soft-Touch v2 ...

3.450,-

Fulltone True-Path ABY Soft-Touch v2 Upgraded, smaller and now even simpler to use! The CS-ABY-ST V2 has silent soft switches thanks to a Nickel core custom-wound 1:1 transformer that doesn't boost the treble frequencies, so fuzz pedals played through the True-Path sound round and distortions don't sound strident. Using the most advanced 4 opto switching system ever, yet also offering the purest signal. Each channel has switchable JFET Buffers to drive long lengths of cables without any tone loss and can be turned off for use with low impedance fuzzes. The True-Path also has a phase switch for in or out of phase signals and an isolation transformer to avoid noise and grounding issues.

Hotone Karat Cap 10 stk til ...

85,-

Karat Cap Diamantformede footswitch-hatter designet for Ampero-produkter, men passer de fleste fotbrytere. Sett med 10 stk.   - Diamond shaped transparent footswitch cap designed for Ampero and most effect pedals - Improves switching accuracy with more comfort - Great for footswitches with halo LEDs - Made from Polycarbonate - sturdy, shiny and stylish

KMA Active AB/Y Pedal

996,-

KMA Machines Active ABY Active Consistent Connectivity ABY boxes are not something that will set the world on fire. We know that. But what a good ABY box can do, is start a flame that’ll fully ignite your creativity, and our Active ABY pedal is a REALLY GOOD one. Expertly built, noise-free, gorgeous looks AND affordable - it just ticks all the boxes.  As an additional offering to our passive ABY box that has graced thousands of rigs the world over, the Active ABY is ideal for those who like to use the Y splitting or combining functions - at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help with level mismatches or signal loss due to long cable runs. Whether you’re looking to switch or combine your Mono input signal using two separate outputs, switch or combine two separate input signals into one output, the Active ABY pedal is a dependable little helper for your tonal quest - the fate of your signal is in your hands!   Main Features • Active ABY Pedal • Sends an input to two separate outputs, separately or combined • Sends two inputs to one source, separately or combined • 180° Phase switch, helps to remove mismatches • Active silent CMOS-based soft switching, heavily reduces mechanical noise with virtually silent signal bypass • Omnidirectional for 2 into 1 or 1 into 2 operations • A&B>Y or Y>A&B switch, allows for precise directionality • Distinct LED colours, to indicate your selected signal path at a glance • Durable compact enclosure for years of reliable switching • Top-mounted jacks, will fit into any setup • Made in Berlin, Germany • Power by opt. 9 V PSU (9 V DC, centre -, 2.1 mm, >55 mA max. current draw) KMA’s ABY Series has been created with a focus on durability, reliability, simplicity and hassle-free operation. The Active ABY pedal features a fully active design along with our active silent CMOS switching. While that might be a hell of a wordy mouthful (or even sound scary to some), what it means practically is that the pedal is completely silent in operation. This has the added benefit of allowing for all sorts of hookups helping to prevent signal loss. Being active, it can also minimise any potential level mismatch between hookups. It can be electronically difficult to achieve this kind of switching without interference between the switching and signal paths, but by employing our own implementation of this switching technology, not only are the mechanical switching noises greatly reduced, but the risk of any pesky loud clicks and pops that has plagued so many boards and has haunted so many musicians, since the inception of ABY boxes when switching, is virtually eliminated.  The bears eyes light up - how awesome is that!? Okay, besides just looking cool and fulfilling our childhood dreams of an army of robot bears with freaking lasers as eyes, the 3 distinct LEDs in the Active ABY actually serve a practical purpose; to quickly and easily show you what signal path you’ve selected at a glance. Red for A, Yellow for B and Blue in the centre for A&B. With the A&B>Y or Y>A&B switch you can use the device in either direction, for sending to different sets of amps, synths or effects or for switching inputs/ instruments/ devices into your chain via the Y channel, for even more creative combining or splitting. While the Phase switch allows for flipping the A Channel by 180°. This can prevent signal cancellation and tone issues that can happen in some setups when combining or splitting signals. This pedalboard-friendly device seamlessly integrates with your existing setup. It's compact, rugged, lightweight, durable, affordable and can be powered via a standard 9V DC power supply, making it convenient for all walks of sonic life. What’s not to like? So, will you choose A or B? With the KMA Machines Active ABY pedal, all you have to do is choose your path and perform!

KMA ACTIVE STEREO AB/Y Pedal

1.555,-

KMA Machines Active STEREO ABY Consistent Active Connectivity, in Stereo  There’s nothing new about ABY boxes. They’re a very commonly used accessory and a staple part of many setups out there. But if they are so common, then (until we launched our passive Stereo ABY) why was it so difficult to find one in a stereo format that’s well built, noise-free AND affordable? This is a question we kept encountering as we use many stereo devices daily here at KMA, plus we know that a lot of users are just as mesmerised by the wide sonic worlds of stereo as we are. So, we made a killer stereo ABY switcher to use here at our workshop. In the process we found it so useful, so we decided to make the original STEREO ABY available to the world too in a pedal format.  However, despite our passive boxes gracing thousands of rigs the world over, the Active STEREO ABY takes things a little further and is ideal for those who like to use the Y splitting or combining functions - at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help eliminate level mismatches or even signal loss, if used with long cable runs. Whether you’re looking to switch or combine a Stereo input signal between two separate destinations or switch or combine two separate Stereo input signals into a single stereo output without signal loss, the KMA Machines Active STEREO ABY pedal is a dependable little helper for your tonal quest - the fate of your Stereo signals is in your hands!   Main Features • Active Stereo / Dual-Mono ABY pedal • Sends a Stereo input to two separate stereo outputs, separately or combined via regular ¼ inch/6.35mm Jacks • Sends two Stereo inputs to one stereo source, separately or combined • 180° Phase switch, helps to remove mismatches • Active silent CMOS-based soft switching, heavily reduces mechanical noise with virtually silent signal bypass • Omnidirectional for 2 into 1 or 1 into 2 operations • A&B>Y or Y>A&B switch, allows for precise directionality • Distinct LED colours, to indicate your selected signal path at a glance • Durable compact enclosure for years of reliable switching • Top-mounted jacks, will fit into any setup • Made in Berlin, Germany • Power by opt. 9 V PSU  (9 V DC, centre -, 2.1 mm, >55 mA max. current draw) KMA’s ABY Series has been created with a focus on durability, reliability, simplicity and hassle-free operation. The Active ABY pedal features a fully active design along with our active silent CMOS switching. While that might be a hell of a wordy mouthful (or even sound scary to some), what it means practically is that the pedal is completely silent in operation. This has the added benefit of allowing for all sorts of hookups helping to prevent signal loss. Being active, it can also minimise any potential level mismatch between hookups. It can be electronically difficult to achieve this kind of switching without interference between the switching and signal paths, but by employing our own implementation of this switching technology, not only are the mechanical switching noises greatly reduced, but the risk of any pesky loud clicks and pops that has plagued so many boards and has haunted so many musicians, since the inception of ABY boxes when switching, is virtually eliminated. The bears eyes light up - how awesome is that!? Okay, besides just looking cool and fulfilling our childhood dreams of an army of robot bears with freaking lasers as eyes, the 3 distinct LEDs in the Active ABY actually serve a practical purpose; to quickly and easily show you what signal path you’ve selected at a glance. Red for A, Yellow for B and Blue in the centre for A&B. With the A&B>Y or Y>A&B switch you can use the device in either direction, for sending to different sets of amps, synths or effects or for switching inputs/ instruments/ devices into your chain via the Y channel, for even more creative combining or splitting. While the Phase switch allows for flipping the A Channel by 180°. This can prevent signal cancellation and tone issues that can happen in some setups when combining or splitting signals. This pedalboard-friendly device seamlessly integrates with your existing setup. It's compact, rugged, lightweight, durable, affordable and can be powered via a standard 9V DC power supply, making it convenient for all walks of sonic life. What’s not to like? So, will you choose A or B? With the KMA Machines Active STEREO ABY pedal, all you have to do is choose your path and perform!

KMA DUAL LOOP SWITCHER Pedal

1.555,-

KMA Machines DUAL LOOP SWITCHER Efficient Switchability “A tale of two tones” We get it. There’s a wealth of pedalboard switching devices on the market and some can be quite complex, but what if you want to keep switching between multiple pedals on your board simple, easy to use and yet still effective? Well, the KMA Machines DUAL LOOP SWITCHER pedal has you covered and has been created with a focus on durability, reliability, simplicity and hassle-free operation to expand your creativity. Whether you’re looking to simply switch between two single pedals without extended tap dancing or combine and switch between two entirely separate signal chains, this helpful utility device features KMA’s active circuitry and soft switching for maximum signal integrity without compromise. Plus, with full Stereo/Dual Mono operation the DUAL LOOP SWITCHER allows for maximum flexibility. Main Features • Dual Loop Switcher • Switch or combine two Serial Loops, in Mono or Stereo/Dual Mono • Mono or Stereo/Dual Mono Input and Output (TRS compatible) • Buffered Bypass • Active Silent Soft Switching, heavily reduces mechanical noise and pops • Selectable Loop Order - A to B or B to A • Distinct LED colours, to indicate your selected loop at a glance • Durable compact enclosure for years of reliable switching • Top-mounted jacks, will fit into any setup • Made in Berlin, Germany • Power by opt. 9 V PSU (9 V DC, centre -, 2.1 mm, >55 mA max. current draw) So, you have a pedalboard with a healthy selection of different drives and pedals for your creative tone desires. Good for you, variety is the spice of life. However, what if you need to switch between different overdrive pedals or other effects seamlessly with just a single efficient click? Normally this would involve turning the first pedal off and the second one on... sure, that’s just two clicks... but you need it to happen in that split second, right at that climactic point in the song where you simply can’t have your clean signal popping in and spoiling the vibe for even a brief moment. What if you miss one of the switches or hit the wrong one by accident on your crowded pedalboard and all chaos breaks loose? Well, the KMA Machines Dual Loop Switcher is here to swiftly save moments such as this. Featuring just two loops and without any gimmicks, this handy little helper takes the pain out of the pedalboard shuffle and provides serene switching possibilities in a diminutive and solid package. The A/B Switch toggles which loop is selected and a single Bypass switch means you can juggle your tones with ease. But wait, there’s more. By briefly holding down the A/B Switch you can combine both A & B loops for even more creative options, plus you can change the order of the two loops via the Direction Toggle Switch right in the middle of the pedal. Want to setup two completely different effects chains and switch between them or combine them, with the possibility of switching the order of them at the same time? How about switching between stereo effects or other devices in your signal chain while maintaining the same output path? Even switching between mono and stereo effects and then combining them in series using the flexibility added by our stereo/dual mono compatibility via TRS jacks is possible. Perhaps you’d like to add a mute function at a specific place in your signal chain or a tuner output? With just two loops, the possibilities are still endless but the solution is dead simple. Oh, and did we mention the bears eyes light up - how awesome is that!? Okay, besides just looking cool and fulfilling our boyhood dreams of an army of robot bears with freaking lasers as eyes, the 2 distinct LEDs actually serve a practical purpose; to quickly and easily show you which loop is selected at a glance. Red for A, Yellow for B and both if the loops are combined. This pedalboard-friendly device seamlessly integrates with your existing setup. It's compact, rugged, lightweight, durable, affordable and can be powered via a standard 9V DC power supply, making it convenient for all walks of sonic life. What’s not to like? Reduce your tap dancing and increase your flow and creativity simply - effectively and with one tap at a time!

Meris Preset Switch 4-way ...

1.555,-

Meris Preset Switch 4-Way Controller Instant Compact Control The Meris Preset Switch brings 4-way control to your Meris pedalboard, allowing easy access to saving and recall of up to 4 internal presets to a single or even multiple* Meris pedals, with instantaneous preset switching. No external power is required, simply connect to your pedal’s EXP input with the single included TRS cable. You can also control multiple Meris pedals with the addition of a simple Y cable* to create a full pedalboard preset system. Compact and boasting a stylish black finish, the Meris Preset Switch is designed to be aesthetically placed in front of 2 Meris pedals, its width being that of two of the pedals. If you’re a fan of modifying your pedals or are an adventurous tinkerer, Meris has added a hidden PCB socket inside the Preset Switch which can be used for mini Arduino** DIY midi projects. This can turn your 4-way Preset Switch into a MIDI controller! Features: Easily access up to 4 presets with instantaneous preset switching No external power required Connect with a single TRS cable (included) Control multiple pedals with a simple Y cable* (*not included) Designed to be aesthetically placed in front of 2 Meris pedals Includes 1 Flat 11″ TRS cable PCB socket for mini arduino* DIY midi projects (**arduino board not included)

Morley Gold Series ABC Pro ...

4.699,-

Morley - Gold Series ABC Pro Selector Are switching boxes giving you a headache? Our ABC Pro Selector is just what the doctor ordered! Based off the original Morley ABC Switcher our Pro version is equipped with new features that will help solve issues commonly faced when using switching devices for multiple amps. New features include a higher enclosure for easy access, a custom built Morley 1:1 isolation transformer, silent switching, a reverse polarity switch and a ground lift switch. PLEASE NOTE! DO NOT use on powered speaker lines. You WILL damage your amp, speakers or both! MAIN FEATURES & SPECS The ultimate amp selector. Route 1 input into 3 outputs. Choose A, B, or C individually or in any combo. Custom Morley 1:1 isolation transformer for absolute transparency and level output. Easy accessible rugged cold-rolled steel enclosure; 6.63″ x 4.38″ x 2.75″ (L x W x H) Silent Relay Switching to prevent pops and bleed. Reverse polarity switch to prevent phasing issues. Ground Lift switch to combat hum from ground loops. High Frequency Filter activates when Ground Lift is engaged to eliminate unwanted frequencies. Powered by one-9v battery or optional Morley 9v adapter. Compatible with most 9v adapters. LED indication, quick clip battery door and one-year warranty. Morley Part Number: ABC-PRO

Morley Gold Series ABC Switch

2.130,-

Morley - Gold ABC Switch Morleys ABC Switch er ett fantastisk verktøy som kan spille flere (opp till 3) instrument gjennom samme forsterker. Alternativt for å kunne velge mellom 3 ulike avspillingskilder, f.eks. ulike forsterkere, lydkort eller miksebord. The Morley ABC adds an extra channel to our iconic ABY pedal. This extra channel adds to it’s versatility and is the perfect tool for multi-instrumentalists and those who like to use multiple amps at the same time. You can route one input to three outputs or reverse it and route three inputs to one output. This makes switching between instruments or amplifiers easy. It’s also completely passive so it doesn’t need a power source to function. Only the LED’s require power, which is great for conserving battery life. Use as many as three amps at the same time or select between them. This is great for live sound as well since you have an additional output to send to the board. Please note that for splitting your signal we recommend using the ABY MIX or ABC Pro as those are better suited for splitting. - Flexible routing: route one input to three outputs or reverse it and route three inputs to one output. - Bypass switches for each channel - Handy LED’s let you know which channels are active . True Bypass . Passive design, can be used without a power source. Only the . - LED’s require power. - Powered by a standard 9V supply or 9V battery - Robust Design built with Cold Rolled Steel - Dimensions: 6.63″ L x 4.38″ W x 2″ H - Current Draw – 2 mA

Morley Gold Series ABY MIX ...

1.990,-

The ABY MIX is essentially a 2-Channel Mixer in a robust pedal enclosure. It’s the perfect utility pedal for multi instrumentalists, teachers, and technicians alike. The latest Gold Series version comes with a fresh new look and upgraded, quieter circuitry. It’s also equipped with our premium buffer circuit so no matter how much cable you’re running your tone will be preserved. Having one of these on hand will prepare you for the most common routing needs. It’s a must-have for every musicians tool kit. Both inputs are routed to each output channel and each output has a bypass switch. The level controls let you mix each input and give you 15dbs to work with. Unity begins at 10 o’clock at the undarkened circle. It runs off a standard 9V power supply and can be powered by a 9V battery in a pinch. Below is an example for a recording/live setup for switching between instruments. For recording you can route your instrument to an amp and a computer interface to capture both your amp’s tone and an isolated signal for digital modeling or re-amping. For a live setup you can switch between instruments and amplifiers easily, or run the additional output to a PA system. For our second example, you can use the ABY MIX to use two instruments at the same time. This is an easy solution for teaching a guitar lesson on the same amp or having an impromptu jam with a friend. The level control can tame or boost each instrument’s signal so no matter each guitar’s pickup output you will be able to mix in the right volume. Certain instruments that have dual outputs, such as a Harp, can be mixed in easily to a single output. These are just a few of many different ways to route the ABY MIX.

Morley Gold Series ABY Switch

1.699,-

The Morley ABY was introduced in the early 1980’s, but when a young engineer named Scott Flesher joined Morley a decade later, little did we know his redesign would go on to become one of the most popular utility pedals of all time. The latest Gold Series version comes with upgraded, quieter circuitry and a fresh new look. It’s simple, robust and versatile. There are many different ways to use the ABY. You can route one input to two outputs or reverse it and route two inputs to one output. This makes switching between guitars or instruments a breeze as well as using multiple amplifiers. It’s also completely passive so it doesn’t need a power source to function. Only the LED’s require power, which is great for conserving battery life. Below is an example of using the ABY to switch between instruments on stage. This greatly speeds up the transition in between songs or during your set: In our second example you can use the ABY to switch between amplifiers or split your signal for recording. Please note that for splitting your signal we recommend using the ABY MIX or ABY Pro as those are better suited for splitting: These are just a few of the many different ways to use the ABY. MAIN FEATURES & SPECS Routes one input to two outputs or two inputs to one output Handy LED’s let you know which channel is active True Bypass Powered by a standard 9V power supply or 9V battery Cold Rolled Steel Enclosure for Maximum Protection Dimensions: 5.25″ L x 3.25″ W x 2″ H Current Draw – 2 mA 1 Year Warranty – Please keep your purchase receipt NOT intended for use on powered speaker lines Morley Part Number: ABY-G

Red Panda Remote 4 Footswitch ...

1.390,-

Remote4 Remote and Preset Footswitch The Remote4 is a simple and easy to configure remote and preset switch with 4 footswitches that can access presets and extended pedal functions on Red Panda pedals. Its simple and ingenious design features scribble strips above each switch that can be labeled with a Sharpie and erased using isopropyl alcohol. Remote4 connects to the pedal via an included 6.3 mm TRS cable, and does not require power. The Remote 4 works with all Red Panda effects pedals that have USB. See your pedal’s documentation for specific functions. Main Features: • Remote and preset footswitch for Red Panda pedals • Simple, Easy to configure • 4 footswitches for accessing presets and extended pedal functions • Works with all Red Panda pedals • Scribble strips for custom labelling • Connects via 6.3 mm TRS cable (included) • Designed and assembled in USA • No powered required

Source Audio Tap Tempo Switch ...

436,-

Multi-purpose Footswitch The Source Audio Tap Tempo Switch is a simple footswitch that adds significant functionality to every One Series pedal in the Source Audio collection. It offers on-the-fly tap tempo control over modulation rates for the Vertigo Tremolo, Lunar Phaser, Gemini Chorus, and Mercury Flanger as well as delay times for the Nemesis Delay. The Tap Tempo also makes it possible to externally scroll through presets on the Nemesis Delay, toggle between distortion engines on the L.A. Lady Overdrive, Kingmaker Fuzz, and AfterShock Bass Distortion, or render virtual knob changes to every One Series pedal. In addition, the Switch has a standard 1/4” output for use with compatible third-party products (normally open [NO], single pull/single throw (SPST)). Functions Per Pedal Nemesis Delay — The Nemesis features an onboard tap tempo switch, but it is also possible to connect the Source Audio Tap Tempo to the Nemesis and externally tap the pedal’s delay time (with several available beat subdivisions). The external Tap Tempo Switch also scrolls up or down through presets or manages the Nemesis’ Hold (aka “Freeze”) function with either momentary or latching action. When connected to the Nemesis’ Control Input the Tap Tempo Switch functions similar to an expression pedal — program the Switch to alter the virtual positions of any combination of knobs with a single tap. Lunar Phaser, Vertigo Tremolo, Gemini Chorus, and Mercury Flanger — With the One Series modulation pedals users can tap out the modulation rate and use the SPEED knob to set beat divisions — choose from quarter note, eighth, 16th and triplets. Like the Nemesis Delay it is also possible to perform on-the-fly knob position changes with the Tap Tempo Switch. ​L.A. Lady Overdrive, Kingmaker Fuzz, and AfterShock Bass Distortion — Use the Tap Tempo Switch to toggle between any two types of distortion with the One Series distortion pedals: the L.A. Lady, Kingmaker, and AfterShock. Each pedal features dual distortion blocks that can be loaded up with any of the 40 plus distortion engines available in the Neuro Mobile App. Run the two distortion engines in parallel or cascade them internally. When cascading engines the Tap Tempo can engage or bypass either engine – perfect for switching between rhythm and lead tones. Run the engines in parallel and use the Tap Tempo to add or subtract the second engine to/from the mix. And as with all One Series pedals, the external Tap Tempo makes virtual knob changes with a single tap. ​ Third Party Pedals — The Tap Tempo Switch’s standard ¼” TRS jack connects to most pedals that featuring standard external normally open [NO], single pull/single throw (SPST) tap tempo connections. Additional Features and Specifications Includes 1/8” TRRS Daisy Chain/Sensor cable for use with Source Audio One Series pedals. Footswitch: momentary single pole/single throw. 1/8” TRRS Output: connects with any Source Audio One Series pedal. 1/4” TRS Output: connects to compatible 3rd party pedals (normally open (NO), SPST switch). Dimensions: L: 2.5 in./6.35cm x W: 2.25 in./5.7cm x H: 2 in./5.1cm (including switch). Weight: 0.4 lbs / 0.18 kgs

Viser 1 til 15 (av 22 produkter)