AER AMP ONE Bassforsterker

23.650,-

Liten, kompakt men stor,stor lyd. AER "amp one"™ er en liten 200 watts basscombo spesielt designet for elektrisk bass. Som med alle andre AER forsterkere, finnes inget annet alternativ enn høyest mulige kvalitet. It seems like we have done it again … Over many years you have asked us for something small for electric bass – simple, powerful and with a performance hard to believe … And there it is: the AER Amp one. Based on a superb 10“ in a bass reflex enclosure, in combination with a serious 200 watt power amp, more than sufficient power-supply and extended dynamic headroom - Input 6.3 mm (1/4”) input jack socket as high impedance line input stage with pad (high/low attenution). Equalizer three band tone controls with middle parametric Colour ‘mid-cut-treble-boost’-filter Tone balance the tone balance enables the bass- or treble emphasis or a combination of both Effect compressor with ratio and threshold Power amp 200 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 10“ woofer neodymium magnet Features ground lift, headphones, line out, sub out, footswitch (muting and effect loop), send, return, insert pre/post EQ, aux in, adjustable DI-out Dimensions 325mm x 375 mm x 295 mm (12.80“ x 14.80“ x 11.60“), HxWxD Weight 13,50 kg (29.80 lbs)

AER AMP THREE Bassforsterker

27.215,-

Amp three follows the concept of Amp one: being small, rich and powerful based on a one way speaker-system. It also offers a superb mix between size and power and features for professional use. Equipped with 2 x 8“ heavy duty bass-speakers, it enhances the low mids and offers a more open, transparent tone with the neccessary strength and focus to cut through. Input 6.3 mm (1/4”) input jack socket as high impedance line input stage with pad  (high/low attenution) Equalizer three band tone controls with middle parametric Colour ‘mid-cut-treble-boost’-filter Bass boost +10 dB / 55 Hz Tone balance the tone balance enables the bass- or treble emphasis or a combination of both Effect compressor with ratio and threshold Power amp 200 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 2 x 8“ heavy-duty bass-speakers Features ground lift, headphone outputs, line out, sub out, footswitch (muting and effect loop), send, return, insert pre/post EQ, aux in, adjustable DI-out Dimensions 365 mm x 420 mm x 300 mm (14.40“ x 16.60“ x 11.80“), HxWxD Weight 16 kg (35,28 lbs)

AER AMP TWO Bassforsterker

28.990,-

Amp two is the second member of the Bottom Line combo bass amps.  In line with Amp one, but with a more defined speakersystem and more power. A 12“ neodymium woofer for quick and full bass response combined with a 4“ mid-high direct radiating speaker for gentle trebles allows a wider range of sounds from funk to pop and rock to jazz. As further difference to the Amp one the signal path is lead trough adjustable compression pre EQ to provide even more dynamic headroom. Input 6.3 mm (1/4”) input jack socket as high impedance line input stage with pad (high/low attenution). Equalizer three band tone controls with middle parametric Colour ‘mid-cut-treble-boost’-filter Bass boost +10 dB / 55 Hz Tone balance the tone balance enables the bass- or treble emphasis or a combination of both Effect compressor with ratio and threshold Power amp 240 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 12“ (300 mm) woofer neodymium alloy magnet 4“ (100 mm) mid-high direct-radiating 2-way speaker system Features headphones, line out pre/post master switchable, sub out, footswitch (muting and effect on/off), send, return, insert pre/post EQ, adjustable aux in, tuner, adjustable hf level, adjustable pre/post EQ DI-out, ground lift Dimensions 500mm x 420 mm x 350 mm (19.70“ x 16.60“ x 13.80“), HxWxD Weight 23,50 kg (51.70 lbs)

AER Basic Performer 2 ...

35.750,-

The Basic Performer 2 is a solution for Bass and instruments of the lower registers, based on the experience of multiplying well proven AER acoustic systems. Small twin-cone systems are fast, provide a superior coverage for the critical mid-range and have enough substance in the low end. The AER band-pass/bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. High-End preamps, proper filters and additional professional sound design make the Basic Performer a multitalented all-round solution. The sound characteristics are full range thus open and light yet breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments, e. g. harp, cello, accordion … Channel 1 6.3 mm (1/4”) jack socket as high impedance line input with switchable 9 V phantom power and high/low attenuator) Channel 2 combo socket XLR + 6.3 mm (1/4”) jack as high-impedance line- or balanced microphone input with switchable phantom power Equalizer three band tone controls for both channels Colour ‘mid-cut-treble-boost’-filter Effects compressor, notch filter Power amp 2 x 100 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 2 x 8” (200 mm) dual cone full-range speakers (front side) 2 x 8” (200 mm) woofers (inside) Dual-chamber bass reflex cabinet Features tape in, headphones, tuner, insert, line out, DI-out, send, return, footswitches (effect on/off, solo/ensemble, mute channels) Dimensions 490 mm x 360 mm x 405 mm (19.30“ x 14.2 “ x 15.90“), HxWxD Weight 23,00 kg (50.8 lbs)

Aguilar AG 700 v2 ...

13.699,-

Aguilar AG 700 v2 Bassforsterker Topp 700 Watt Designed for bassists who demand a pristine, hi-fi sound that's both articulate and responsive, the AG series stands apart. Compared to the tube-like warmth of the Tone Hammer series, the AG series offers a transparent tone that allows the natural voice of your bass to shine clearly. It features our most comprehensive EQ set with Bass, Low Mid, High Mid, and Treble controls, complemented by Deep and Bright broadband boosts. Equipped with the Aguilar Cabinet Suite, universal mains, and expanded connectivity options, the AG series meets the performance needs of bassists, ensuring a flawless blend between live, studio, and at-home settings. Power Output: 700 watts @ 2.67 or 4 ohms, 350 watts @ 8 ohms Preamp Section: Solid State Power Section: Class D Transformer: Switching mode power supply (SMPS) EQ Section: Bass: +/- 17 dB @ 40 Hz Deep: +6 dB <250 Hz Low Mid: +/- 15 dB @ 300 Hz High Mid: +/- 14dB @ 800 Hz Treble: +/- 14 dB @ 4 kHz Bright: +6 dB >3 kHz, shelving -10dB input pad Tuner output Inputs: One 1/4" input jack, compatible with all active and passive basses Speaker Outputs: One Neutrik Speakon speaker outputs Effects Loop: Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units Balanced Output: XLR balanced output with pre/post EQ and ground lift switch Cooling: Two high-quality whisper fans with thermal speed control

Ny

Aguilar DB 700 Hybrid ...

30.790,-

Aguilar DB 700 Hybrid Amp Bassforsterker Topp 700 Watt 700-watt hybrid bass head with a high-voltage tube preamp that brings the character of the DB 751 to a lightweight format, plus built-in Cabinet Suite IR simulation. The Aguilar DB 700 delivers the legendary, tube-driven tone of the DB 751 in a lightweight, 700-watt package built for today’s bassist. Its dual 12AX7 tube preamp produces deep lows, rich mids, and articulate highs with signature Aguilar warmth and punch. Designed for the stage and beyond, it features universal mains for global touring and a rugged rack-mountable chassis. With seamless integration into the Aguilar Cabinet Suite, the DB 700 offers modern tonal flexibility without compromising its classic analog soul. Hybrid bass amp head, 700 W Minimum cabinet impedance: 4 ohm High-voltage tube preamp with 2 x 12AX7 3-band EQ Cabinet Suite with cabinet impulse responses for stage, studio and silent practice Effects loop Two XLR outputs Tuner output and auxiliary input Headphone output Weight: 5 kg

Aguilar Tone Hammer 500 v2 ...

12.199,-

Aguilar Tone Hammer 500 v2 Bassforsterker Topp 500 Watt Designed for the discerning bassists, the Tone Hammer series offers a lightweight yet powerful solution inspired by the soulful warmth of tube amplifiers. It's rich and harmonic preamps offers a round, full-bodied character, making every note resonate with depth. It also features a classic 3-band EQ set with bass, treble and fully sweepable midrange controls. The Drive control adds distortion and even more tube-like grit and punch to your sound. Equipped with the Aguilar Cabinet Suite, universal mains, and expanded connectivity options, the Tone Hammer series meets the performance needs of bassists, ensuring a flawless blend between live, studio, and at-home settings. Power Output: 500 watts Preamp Section: Solid State Power Section: Class D Transformer: Switching mode power supply (SMPS) EQ Section: Bass: +/- 17 dB @ 40 Hz Mid Level: +/- 16 dB Mid Frequency: 180 Hz: kHz Treble: +/- 14 dB @ 4 kHz Drive Control: Fully adjustable, featuring Aguilar's proprietary AGS (adaptive gain shaping) circuit Effects Loop: Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units. Inputs: One 1/4" input jack, compatible with all active and passive basses Speaker Outputs: One Neutrik Speakon speaker outputs Balanced Output: XLR balanced output with pre/post EQ and ground lift switch Tuner output Cooling: Two high-quality whisper fans with thermal speed control

Aguilar Tone Hammer 700 v2 ...

13.699,-

Aguilar Tone Hammer 700 v2 Bassforsterker Topp 700 Watt Designed for the discerning bassists, the Tone Hammer series offers a lightweight yet powerful solution inspired by the soulful warmth of tube amplifiers. It's rich and harmonic preamps offers a round, full-bodied character, making every note resonate with depth. It also features a classic 3-band EQ set with bass, treble and fully sweepable midrange controls. The Drive control adds distortion and even more tube-like grit and punch to your sound. Equipped with the Aguilar Cabinet Suite, universal mains, and expanded connectivity options, the Tone Hammer series meets the performance needs of bassists, ensuring a flawless blend between live, studio, and at-home settings. Power Output: 700 watts @ 2.67 or 4 ohms, 350 watts @ 8 ohms Preamp Section: Solid State Power Section: Class D Transformer: Switching mode power supply (SMPS) EQ Section: Bass: +/- 17 dB @ 40 Hz Mid Level: +/- 16 dB Mid Frequency: 180 Hz - 1 kHz Treble: +/- 14 dB @ 4 kHz Drive Control: Fully adjustable, featuring Aguilar's proprietary AGS (adaptive gain shaping) circuit Effects Loop: Series operation. Adds 6 dB of additional gain, making it useful for a broad range of effects units. Inputs: One 1/4" input jack, compatible with all active and passive basses Speaker Outputs: One Neutrik Speakon speaker outputs Balanced Output: XLR balanced output with pre/post EQ and ground lift switch Tuner output Cooling: Two high-quality whisper fans with thermal speed control

Ashdown ABM 1200-EVO IV UK ...

19.999,-

Made In UK! The ABM 1200 EVO IV teams the ABM preamp with a gut-rumbling 1200W power stage delivering huge bass tones for the biggest of stages. Whether live or in the studio ABM has become relied upon by many of the highest profile bassists in the world. Immediately identifiable on stages around the world thanks to it's glowing VU meter. Over the past 20 years the Ashdown ABM range has become the industry standard for bass players in pursuit of real bass tone, versatility, power and tour proven reliability. Now in its fifth incarnation, ABM EVO IV pairs class-leading preamp sophistication with uprated powerhouse performance and an all-new 9-band EQ - available in three head versions rated at 300W, 600W and 1200W. Made in UK Power - 1200 Watts Impedance - Minimum 4 Ohms Switch Passive/Active Flat/Shape Switch Switch to change from 3-band to 9-band EQ Mute Switch Pre/Post EQ switch Effects : - Sub Harmonics - Tube Drive - Dynamic Compression Optional FS-4 Footswitch to enable/disable Valve Drive Plus, EQ, Dynamic Compression and Sub Harmonics.

Ashdown ABM-EVO-V-750 UK ...

17.599,-

Made In UK! It’s now 25 years since UK-based Ashdown Engineering shook up the bass world with the ABM (Ashdown Bass Magnifier) bass amp. With its distinctive vintage VU meter and a simple but versatile EQ section combining straightforward rotary controls with miniature sliders, the ABM partnered solid bass tone with variable tube grind and a feature set that gave players just what they needed to perform on stage and in the studio. Over the years, the ABM platform has evolved with the times and the latest evolution is the new ABM EVO V, the sixth version of what continues to be the bass amp of choice for leading players around the world, including the Foo Fighters’ Nate Mendel, Biffy Clyro’s James Johnston, and Shavo Odadjian from System of a Down. Traditionally sporting an ice-blue front panel, the ABM EVO V looks very different, moving to an all-black design that acknowledges the trend towards a more anonymous backline, although the trademark Ashdown illuminated VU meter remains very much in evidence. Indeed, the EVO V is the first ABM to feature VU meters for both input and output signals. Under the hood, it’s all about power and headroom. A new 750-Watt output section is the most dynamic ever used in an ABM, gifting the amplifier with stunning power and response. All the much-loved ABM features remain in evidence including 9 band EQ, 12AX7-powered Valve Drive, on-board compressor, and sub-harmonic control, with the UK-built EVO V adding mains voltage switching, temperature controlled low noise cooling and a transformer-isolated DI output. “Like everything we do, the ABM EVO V is developed in response to the needs of our customers” comments Ashdown MD Dan Gooday. “An increasing number of players have been asking if we can bridge the dual output sections of our ABM 1200 head. The new ABM EVO V answers that need for more power and dynamics.” - Category : Bass amp head - Dimensions (mm) : 489 x 336 x 155 - EQ : [ampli_eq_9bandes] - Effects loop : Yes - Footswitch input : Yes - Headphone output : No - Input : jack, aux jack, [G_entree_boucle_effet_jack], footswitch - Number of effects : 3 - Output : XLR DI, Tuner jack, Cabinet 2 x Speakon, Line out jack - Pedalboard included : No - Power : 750 W - Pre-amp tubes : 12AX7 - Weight (kg) : 13 kg

Ashdown CTM 100 Valve Head ...

19.899,-

Like it’s big brother, the CTM-300, our CTM-100 takes it’s sonic cues from the classic valve heads of the past and pairs its 100W all-valve design with modern features, construction and reliability. Built tough for life on the road Built tough the CTM-100 head is housed within an 18mm Marine grade birch ply cabinet that features heavy duty flip style handles and an internal fan to keep things cool. This is an amplifier that is built to last using only the finest components to ensure years of trouble-free performance night after night. Classic all-valve tone With a classic five valve preamp configuration and a fully-loaded power section consisting of 2 x KT88 output valves, the CTM-100 is easily up to the job of delivering it’s powerful tones at small to medium-sized gigs night after night. Flexible tone shaping From mellow ‘60s bass tone to growling ‘70s-style bass, straight through to thick and powerful modern tone, the CTM-100 covers a huge range of sonic ground. Hit the Mellow button to engage smooth, warm, clean tones – or punch it out to dial-in pure valve overdriven growl. Standard tone controls give you a wide range of uber-musical sounds, while Deep, Mid Shift, and Bright switches let you fine-tune your tone to the situation. The EQ section is a passive tone circuit - meaning if all controls are at zero there will be no sound through the amp. All the controls are highly interactive, giving you the possibility to dial in exactly what tone you want. Don’t be scared to dial the pots all the way to get the most from the controls. Valve life preserver Saving costly and time consuming trips to the Tech and keeping your amp sounding better for longer, the CTM-100 features user adjustable bias for both output valves which can be set by engaging the bias mode of the dual function VU meter on the front panel. Each output valve is individually fused and user replaceable without removing the unit from its case (meter also indicates valve or fuse failure). Tube-driven DI & Effects Loop To get your tone direct to the desk in the studio or on stage, the CTM-100 features a valve-driven, transformer-derived DI output with an isolated ground to deliver maximum sonic purity and consistent output night after night. Similarly, the front-mounted effects loop is also valve-driven for maximum tonal preservation. Specifications Power Output 100 Watts Power Requirement 115-240 Volts Speaker Outputs 3 x Jack 8/4/2 Ohm DI Output Valve Driven Transformer Derived Impedance Minimum Impedance 2 Ohm EQ Passive EQ Section. Bass, Middle and Treble plus shape push buttons Effects Send Jack Effects Return Jack Pre-Amp Tubes 2 x ECC832 2 x ECC82 Output Tubes 2 x KT88 H x W x D (mm) 279 x 590 x 254 Weight (kg) 18.8

Ashdown CTM 300 Valve Head ...

29.999,-

Taking inspiration from the classic tube heads of the past, Ashdown presents the all-tube CTM-300, a 300W valve masterpiece that melds classic tones with modern features, construction and reliability. Built tough for life on the road Handbuilt in the UK Ashdown Custom Shop the CTM 300 head is housed within an 18mm Marine grade birch ply cabinet that features heavy duty flip style handles and an internal fan to keep things cool. This is an amplifier that is built to last using only the finest components to ensure years of trouble-free performance night after night. Classic all-valve tone With a classic five valve preamp configuration and a fully-loaded power section consisting of 6 x KT88 output tubes to provide the huge grunt, warmth and headroom bassists crave, this is a serious bass amplifier to be called into action when only the best will do. Flexible tone shaping From mellow ‘60s bass tone to growling ‘70s-style bass, straight through to thick and powerful modern tone, the CTM-300 covers a huge range of sonic ground. Hit the Mellow button to engage smooth, warm, clean tones – or punch it out to dial-in pure valve overdriven growl. Standard tone controls give you a wide range of uber-musical sounds, while Deep, Mid Shift, and Bright switches let you fine-tune your tone to the situation. The EQ section is a passive tone circuit - meaning if all controls are at zero there will be no sound through the amp. All the controls are highly interactive, giving you the possibility to dial in exactly what tone you want. Don’t be scared to dial the pots all the way to get the most from the controls. Tube life preserver Saving costly and time consuming trips to the Tech and keeping your amp sounding better for longer, the CTM-300 features user adjustable bias for each individual power tube which can be set by engaging the bias mode of the dual function VU meter on the front panel. Each output tube is individually fused and user replaceable without removing the unit from its case (meter also indicates tube or fuse failure). Tube-driven DI & Effects Loop To get your tone direct to the desk in the studio or on stage, the CTM-300 features a tube-driven, transformer-derived DI output with an isolated ground to deliver maximum sonic purity and consistent output night after night. Similarly, the front-mounted effects loop is also tube-driven for maximum tonal preservation. Specifications Power Output 300 Watts Power Handling 750 Watts Power Requirement 115-240 Volts Speaker Outputs Speakon/Jack Frequency Response 35Hz - 18Khz High Instrument Input 450MV Low Instrument Input 150MV DI Output Valve Driven Transformer Derived Output Impedance 2 Ohm Minimum EQ Passive EQ Section. Bass, Middle and Treble plus shape push buttons Effects Send Jack Effects Return Jack Pre-Amp Tubes 1 x ECC83 1 x ECC832 1 x ECC99 2 x ECC82 Output Tubes 6 x KT88 H x W x D (mm) 266 x 590 x 336 Weight (kg) 28.2

Ashdown FS-1 Footswitch ...

339,-

FS-1 A single button latching foot switch with a heavy duty, 4 metre cable. Compatible with MAG/Toneman 300/600 EVO III heads and combos.

Ashdown FS-2 Footswitch Dual ...

459,-

FS-2 A dual button latching footswitch with heavy duty, 4 metre cable. Compatible with the Rootmaster EVO/EVO II range to engage/disengage Valve Drive and Sub Harmonics.

Ashdown FS-4 Footswitch ...

929,-

FS-4 ABM 4 button heavy duty foot switch with detachable 2.5 meter cable. Used for models: ABM-500/900 EVO III, ABM 300/600/1200 EVO IV, allows control of Valve Drive, EQ, Compression and Sub Octave.

Viser 1 til 15 (av 112 produkter)