SSL 500-Series VHD+ Preamp

7.870,-

SSL VHD+ Variable Harmonic Drive (VHD) Mic Preamplifier The VHD+ Pre is an immensely versatile recording and processing device. It can deliver ultra clean SSL SuperAnalogue™ grade recordings but also features a switchable VHD mode. SSL’s patented Variable Harmonic Drive (VHD) system uses a 100% analogue signal path to generate rich harmonic distortion. As you increase VHD input gain, the Variable Harmonic Drive process introduces either 2nd or 3rd harmonic distortion or a blend of the two to your source material. At lower gain settings it adds gentle valve-style warmth or a touch of transistor edge. As the gain is increased the more extreme the distortion becomes until at high gain settings it delivers fierce trashy bipolar transistor style grunge. This new 500 series version features front and rear inputs with four different impedance selections making it an extremely versatile mic pre and DI box for a wide range of microphones and instruments. The Mic Amp provides up to +75 dB of super clean gain. The VHD switch along with the Drive control provides a variable mix of 2nd to 3rd order harmonics to add warmth and colour to the signal. A Trim control provides +/- 20dB of output trim, which allows the Mic Pre to be ‘driven’ and then the output dialled back to prevent overload of the next module in the chain. An 18dB/Octave High Pass Filter provides a way to filter low frequencies such as floor rumble and is switched to bypass it from the signal path. The front panel 1/4” Tip/Ring/Sleeve (TRS) Jack Socket provides a convenient way to connect instruments when the module is fitted in a rack. This balanced input overrides the rear XLR and has a 10KΩ input impedance and features an automatic -10dB level pad to allow for typically louder balanced line level signals. The Jack input can also be used with unbalanced (TS) cables such as those from synthesizers or guitars. The input level and impedance are switched to 0dB and 1MΩ respectively (for very high impedance sources such as guitar pick-ups) with selection of the HI-Z switch. The rear XLR and front Jack inputs have different impedances available by using the Hi-Z switch and allow for a wide variety of sources. The rear XLR input impedance changes from 1.2 KΩ to 10KΩ for Hi and Lo Z Microphones. The front panel Hi Z switch changes the front Jack input impedance from 10KΩ for line sources such as keyboards to 1MΩ for sources such as electric guitars and basses. Signal level is indicated with a tri-colour LED and the scale of the LED can be set between two -3dB overload points at +16 and +21dBu to allow for operation with +18dBu or +24dBu operating levels. Key Features Ultra clean SSL SuperAnalogue grade preamp VHD system adds controllable 2nd or 3rd harmonic distortion Switchable LF Filter (15Hz to 500Hz) +48V Phantom Power with status LED Pad for use with line level source material Front TRS Jack input with ultra Hi-Z switch for Instrument DI Signal polarity invert switch

SSL SSL 500-Series Bus ...

12.890,-

SSL G-COMP BUS COMPRESSOR Features Legendary SSL G Series Stereo Bus Compressor THE glue and punch maker Additional compression ratio settings 1.5 / 3 / 10 Renowned ‘Auto’ release HPF in sidechain switchable to 30Hz / 60Hz / 106Hz / 125Hz / 185Hz Sidechain In / Out switch Audio production legend The legendary sound of the SSL Stereo Bus Compressor has been glueing mixes together for 40+ years. Often imitated but never equaled, the centre section compressor from the 1980's Solid State Logic G-Series analogue console is an audio production legend. It is a simple unit with a simple purpose; it makes complete mixes sound bigger, with more power, punch and drive. The SSL Bus Compressor turns a mix into a record... The Stereo Bus Compressor brings cohesion and strength to your mix unlike any other processor. To this day it remains a key element of the SSL sound and has become not just a tool for production but a part of top engineers and producers creative process. Key features Legendary SSL G Series Stereo Bus Compressor THE glue and punch maker Additional compression ratio settings 1.5 / 3 / 10 Renowned ‘Auto’ release HPF in sidechain switchable to 30Hz / 60Hz / 106Hz / 125Hz / 185Hz Sidechain In / Out switch

SSL 500-Series E EQ Module

7.780,-

Unique response curves and tonal character The E-Series EQ Module features two different EQ's found on editions of the console produced between 1981 and 1989. Each EQ has unique response curves and tonal character. Historically the type of EQ fitted in an individual console was distinguished by the colours used on the LF knob caps so the two flavours have become known as the 'Brown' and 'Black' EQ's. On the E Series EQ Module you can switch between these two different flavours of EQ that have been loved by generations of professional producers. Key Features: Immortal SSL 4000 E Series circuitry "Black-242" and "Brown-02" twin EQ design Versatile 4 band channel EQ Bell curve option on HF and LF Fully parametric LMF and HMF with Q Based on classic 611E console channel strip

SSL 500-Series E dyn Module

7.780,-

Legendary sonic signature of the SL 4000E The new E Series Dynamics Module for 500 Series racks reproduces the legendary sonic signature of an early 80's classic, the SL 4000 E console channel strip, which was featured on countless 1980's recordings. The E Series Dynamics Module features a compressor/limiter and an expander/gate, both of which return faithfully to the circuitry and key components which define the sound of the original SL 611E Series channel strip. A true RMS converter is used in the side chain while the gain element is an all discrete design identical to the Class A VCA chip used in the original unit. The compressor contains additional switching options to defeat the over-easy curve and to use a linear release instead of the more usual logarithmic curve. The result is a compressor with three distinct voices, each with its own musical character. Key Features: Immortal SSL 4000 Series circuitry Class A VCA replication Expander/Gate Based on classic 611E console channel strip

SSL 500-Series SiX Channel

3.890,-

SSL SiX CH ( SiX Channel strip) The SSL SiX Channel is a single-width 500 Series mini channel strip using the SuperAnalogue channel processing features from SSL’s SiX console including the Mic-pre, low and high frequency EQ, as well as the single knob compressor. The SiX Channel is a simple way to add additional Mic/Line inputs to the line level inputs of any professional audio device, including the Stereo channels of the SiX console. It is also a flexible way to create a professional modular mixer from a ‘summing’ 500 Series rack unit. SuperAnalogue Pre-Amp input: A wide gain range, ultra low noise SuperAnalogue design provides both Line and Mic facilities with a “Line” gain range switch to cover a wide range of source levels. The nominal Line Input impedance is 10 kΩ. This can be changed to 1 MΩ using the Hi-Z switch. The 1MΩ impedance makes this input suitable for very high impedance sources such as passive guitar pickups without the need for an external DI box. Other Features; · Switched 12 dB/oct, 75 Hz High Pass Filter (HPF) · Polarity Switch (ø) inverts the polarity of the rear XLR Mic Amp rack input. · A five segment LED meter shows the output signal level in dBu EQ: The EQ is a gentle, broad stroke two-band design with high and low shelving filters at 3.5 kHz and 60 Hz, adjustable from +15 dB to -15 dB of gain. Each band can be independently switched between shelving and bell curves. The bell curves change centre frequency to operate at 5 kHz and 200 Hz giving greater versatility from the two controls. COMP: A versatile ‘one knob’ channel compressor with features that give powerful and versatile performance from its deceptively simple controls. A three LED meter indicating the amount of gain reduction being applied. The circuit has automatic make-up gain to maintain signal level for the full range of threshold settings. Key Features: SuperAnalogue Mic Pre with 48V, Polarity and HPF Front Panel TRS Line Input with 1MΩ Hi-Z switch. Switched 2 band EQ with indepandantly Switched single knob compressor with variable threshold. 5 frequency selectable High-Pass Filter and Dedicated Output Trim. Tech Specs: Module signal: Mono Pre-Amp Gain: Variable from +6 to +72 dB (Mic), -3 to +63dB (Line) Mic Pre EIN: Typically 129dB THD+N: <0.0015% CMRR: >80dB (Mic), >70dB (Line)

Puresound P1316 Seidematte ...

375,-

PURESOUND Custom Series Seide - P1316. Custom Series seide med 16 strenger for 13" skarptrommer. Custom Serien har en bra balanse mellom stramhet og livlighet. De medium-tykke seidene gir en pen topp uten å bli for delikat slik at den forsvinner i lydmiksen. Færre strenger demper mindre seideskinnet og gir mer kropp, mens seidelyden får litt mindre volum.

Focusrite Scarlett 4i4 Gen4 ...

3.950,-

Focusrite Scarlett 4i4 Gen4 | USB-lydkort, 4 inn/4 ut Fjerde generasjons Scarlett er bedre enn noensinne! Den nye, fjernstyrbare preampen gir deg hele 69 dB gain – nok til å drive de alle fleste mikrofoner på markedet. Converterne er hentet fra Focusrites RedNet-serie, med et dynamikkområde på hele 120 dB. Den analoge AIR-kretsen, som gir opptaket ditt presence og luft, har nå også fått «Harmonic Drive», for subtile harmoniske overtoner. Og de nye funksjonene Auto Gain og Clip Safe hjelpe deg å sette et perfekt nivå, og sørger for at opptaket ditt aldri vil klippe. Scarlett 4i4 4th Gen er et svært allsidig lydkort. Her får du to kombi jack/XLR-innganger på forsiden, og ytterligere to balanserte linjeinnganger på baksiden. Her finner vi også MIDI inn og ut på 5-pins DIN, samt fire balanserte linjeutganger. Det er også verdt å nevne at hodetelefonutgangen er en separat buss, som i prinsippet gir 4i4 4th Gen totalt seks utganger! Tilkobling til PC eller mac skjer via USB-C. I tillegg har Scarlett 4i4 4th Gen en egen USB-C port for 5V DC, slik at du også kan benytte lydkortet med telefon eller nettbrett. En enkel «Easy Start» veiviser guider deg gjennom installasjonen, og skulle du noensinne få problemer, vil Focusrites prisvinnende 24/7/365 support hjelpe deg. Alle Scarlett lydkort har også tre års garanti. Når du registrerer din Scarlett på www.focusrite.com, får du tilgang til en omfattende programvarepakke ved navn Focusrite Hitmaker Expansion. Denne inkluderer kjente plug-ins og soft-instrumenter som Antares Auto-Tune Access, Relab LX480 Essentials, Marshall Silver Jubilee 2555, XLN Addictive Drums 2: Studio Rock Kit og Ableton Live Lite. Komplett liste finner du her: https://focusrite.com/en/hitmaker-expansion

OLLO Audio Cable 2 m for ...

389,-

Replacement cable for s-series headphones. Length: 2m.

OLLO Audio S5X 1.1 Calibrated ...

5.499,-

CALIBRATED MONITORING FOR ATMOS, SONY360, AURO 3D, UNREAL ETC. Reference class, open back, dynamic headphones with flat frequency response for binaural/immersive mixing and USC calibration, made in the EU. SPEAKER Hand-picked and left / right matched transducers delivering accuracy and instrument separation. (+/-1dB SPL tolerance, pink noise, range 100Hz-10kHz in the free field*) 50 mm, PET 25u membrane, 2 layered coil, 50 ohms, Dynamic Neodymium speaker with 108dBSPL @ 0 dBu RMS 1KHz 30ohm output that makes them work with smart devices too. Replaceable using home tools. ACOUSTICS Replaceable earpads with outer diameter of 95 mm(3.75inch), an inner diameter of 57.5mm(2.25inch) and depth of 20mm(0.8inch), +/-2.55mm. Perforated hybrid artificial leather and velour earpads to control flow resistance around the earpads seal resulting in smoother response through all frequency bands and improved heat dispersion. 1kHz @ 85dBSPL sweep THD < 0.074%, Variation in frequency response in band from 20Hz to 20kHz ~12 dB SPL* pink noise. Front-to-back air pressure equalization controlled with Saati flow resistor 3.2Ohms(²)/1cm² The ex-centric and angled speaker in a conical radiation chassis with an optimal sound stage for the spatialization of objects in the binaural renderer Frequency response tuned for translation of immersive mix between binaural and speaker setup HEADBAND Artificial leather strap Clamping force set for target frequency response on industry-standard bitragional diameter of 14.3cm (KEMAR) Stainless spring steel with powder coating 360 earcups rotation with sliders for head size adjustments Strap and steel headband are replaceable using home tools CABLE Detachable braided silicone cable employing OFC core to ensure minimal signal distortion. Colour labelled L and R jacks (Left is Black) Ball-locking mechanics on the embedded 2.5mm jack plug Screw-on adapter from 3.5mm to 6.3mm jacks (1/8 to 1/4 inch) CALIBRATION PLUGIN USC
Unit Specific Calibration plugin included. AU and VST3. Upgrading with the Waves NX room modelling and head tracking available. WARRANTY
5 years limited warranty (Earpads and cable are excluded due to the nature of exposure)

OLLO Audio S5X 1.0 Immersive ...

3.899,-

S5X ver 1.0 Binaural Monitoring tuned for immersive mixing. Designed and optimized for binaural mix translation between headphones and speaker setup and vice versa. Includes a Carry on puch. 5-Year warranty Made from sustainable materials Hand made in EU S5X Technical details Frequency range
 15 Hz - 22 kHz sweep 1/3 oct p-p range (+/-1) 14.5 dBSPL
 20 Hz - 20 kHz sweep 1/3 oct p-p range (+/-1) 12 dBSPL Sensitivity
 @ 0 dBu RMS 1 kHz produces (+/-1) 108 dBSPL
 @ -23 dBu RMS 0.5-2kHz pink produces (+/-1) 85 dBSPL Earpads in/out diameter / depth
+/- 2.5mm 57.5mm / 95mm / 20mm
 Clamping pressure N/cm²
@14.3cm breadth ~0.127 N/cm²
 Impedance
 +/- 5% 50 Ohm
 Weight
 414g

Viser 481 til 490 (av 3692 produkter)