JBL PRX818W-XLF Aktiv Sub ...

21.900,-

JBL PRX818W-XLF | Aktiv 18" sub 18" subwoofer med 1500W forsterker, DSP og kontroll over WiFi. Innebygget DSP, med volum, 8-bånds parametrisk EQ og 50 ms speaker delay. Innebygget WiFi, for fjernkontroll via iOS og Android app. 1500W klasse D forsterker, med intelligent «vari-speed» viftestyring. Analog dbx type IV limiter JBLs patenterte Differential Drive elementer (les mer her). Kabinett av tre, med robust DuraFlex finish. PRX818XLFW 18" sub 2 inn/2 ut Frekvensrespons +/- 3 dB: 35 Hz – 87 Hz Max peak SPL: 134 dB Vekt: 36,8 kilo NB! Vekt for høy til normal transport. Ta kontakt for fraktkostnad.

JBL PRX835W Aktiv 3-Vegs ...

23.900,-

JBL PRX835W | Aktiv høyttaler med 15", 6,5" og horn Tre-veis høyttaler med 1500W forsterker, DSP og kontroll over WiFi. Innebygget DSP, med volum, 8-bånds parametrisk EQ og 50 ms speaker delay. Innebygget WiFi, for fjernkontroll via iOS og Android app. 1500W klasse D forsterker, med intelligent «vari-speed» viftestyring. Analog dbx type IV limiter JBLs patenterte Differential Drive elementer (les mer her). Kabinett av tre, med robust DuraFlex finish. PRX835W 15", 6,5" og horn 2 x linje/mic inn, med separat gain og linje ut Frekvensrespons +/- 3 dB: 39 Hz – 20 kHz Max peak SPL: 138 dB Dekningsgrad: 90 x 50 Vekt: 34,9 kilo NB! Vekt for høy for normal transport. Ta kontakt for fraktpris.

Yamaha PSR-S750 og S950 ...

4.850,-

Flightcase designet for Yamaha PSR S-750 og S-950 Keyboard. 2 stk. kraftige butterfly låser i front. Håndtak i front Lidstay som holder lokket i åpen posisjon litt over 90 grader. Skumlagt innvendig Invendige mål: 1003mm(L) x 438mm(D) x 148mm(H) Utvendige mål: 1120mm(L) x 495mm(D) x 198mm(H) Vekt ca. 13kg   Inngravering av logo eller navn og plate med label for merking med tusj, kan velges som tillegg. Kvalitet produsert i Norge! VossMusikk.no er din leverandør av flightcaser, rack, transportkasser, pedalbrett, stativflighter, mikrofonkasser, backline flighter, instrumentkasser, keyboardflighter, DJ-flighter, flatskjermkasser, laptop-flighter og så mye, mye mer. Kun fantasien setter grenser for hva vi kan lage flightcase til.

Klotz RamCAT 6 SF/UTP ...

1.820,-

Klotz RC6EE flexible RamCAT6 network cable for use on the road with etherCON Cat.6a ruggedized Cat. 6 Outdoor, SF/UTP, AWG26/19 stranded suitable for dragchains (tested in endurance test) compression resistant construction due to a PE cross 10 GB Ethernet acc. to IEEE 802.3an extra-rugged PUR jacket ruggedized connector with Cat.6a component compliance intermateable with the existing etherCON Cat.5 range attention! does not intermate with the Cat.6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B The RC6EE is a flexible3 RamCAT6 cable designed for data transfer in mobile operation.  Developed for a frequency of 500 MHz, it is suitable for data transfer rates of up to 10 Gbit/s.  The RAMCAT6 is the cable of choice for data transfer in the Ethernet applications 1000BaseT and  10GBase-T where drag chains and cable drums are used. The RC6EE offers characteristic impedance of 100 Ω and has four twisted pairs with copper cores  (19 x 0.10 mm). The matched lay lengths of the individual pairs and the sophisticated cable  stranding with central PE cross are designed to maximize NEXT (near-end crosstalk) and FEXT  (far-end crosstalk) values. With cross-shaped PE central filler and abrasion-proof PUR jacket,  the cable is ideal for mobile use on the road. Dual shielding reliably protects against  electromagnetic interference. The RC6EE is made up with Neutrik etherCON connectors.  These RJ45 connectors with rugged metal housing are CAT6a-compliant and downward-compatible  with previous standards. The technically advanced CAT6 standard presents a particular challenge  for cable designers. It’s a challenge we were happy to tackle!

Klotz RamCAT 6 SF/UTP ...

1.380,-

Klotz RC6EE flexible RamCAT6 network cable for use on the road with etherCON Cat.6a ruggedized Cat. 6 Outdoor, SF/UTP, AWG26/19 stranded suitable for dragchains (tested in endurance test) compression resistant construction due to a PE cross 10 GB Ethernet acc. to IEEE 802.3an extra-rugged PUR jacket ruggedized connector with Cat.6a component compliance intermateable with the existing etherCON Cat.5 range attention! does not intermate with the Cat.6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B The RC6EE is a flexible3 RamCAT6 cable designed for data transfer in mobile operation.  Developed for a frequency of 500 MHz, it is suitable for data transfer rates of up to 10 Gbit/s.  The RAMCAT6 is the cable of choice for data transfer in the Ethernet applications 1000BaseT and  10GBase-T where drag chains and cable drums are used. The RC6EE offers characteristic impedance of 100 Ω and has four twisted pairs with copper cores  (19 x 0.10 mm). The matched lay lengths of the individual pairs and the sophisticated cable  stranding with central PE cross are designed to maximize NEXT (near-end crosstalk) and FEXT  (far-end crosstalk) values. With cross-shaped PE central filler and abrasion-proof PUR jacket,  the cable is ideal for mobile use on the road. Dual shielding reliably protects against  electromagnetic interference. The RC6EE is made up with Neutrik etherCON connectors.  These RJ45 connectors with rugged metal housing are CAT6a-compliant and downward-compatible  with previous standards. The technically advanced CAT6 standard presents a particular challenge  for cable designers. It’s a challenge we were happy to tackle!

Klotz RamCAT 6 SF/UTP ...

9.935,-

Klotz RC6EEW flexible RamCAT6 network cable drum system for use on the road with etherCON Cat.6a ruggedized Cat. 6 Outdoor, SF/UTP, AWG26/19 stranded suitable for dragchains (tested in endurance test) compression resistant construction due to a PE cross 10 GB Ethernet acc. to IEEE 802.3an extra-rugged PUR jacket ruggedized connector with Cat.6a component compliance intermateable with the existing etherCON Cat.5 range attention! does not intermate with the Cat.6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B The RC6EE is a flexible3 RamCAT6 cable designed for data transfer in mobile operation.  Developed for a frequency of 500 MHz, it is suitable for data transfer rates of up to 10 Gbit/s.  The RAMCAT6 is the cable of choice for data transfer in the Ethernet applications 1000BaseT and  10GBase-T where drag chains and cable drums are used. The RC6EE offers characteristic impedance of 100 Ω and has four twisted pairs with copper cores (19 x 0.10 mm).  The matched lay lengths of the individual pairs and the sophisticated cable stranding with central PE  cross are designed to maximize NEXT (near-end crosstalk) and FEXT (far-end crosstalk) values.  With cross-shaped PE central filler and abrasion-proof PUR jacket, the cable is ideal for mobile use on the road.  Dual shielding reliably protects against electromagnetic interference. The RC6EE is made up with  Neutrik etherCON connectors. These RJ45 connectors with rugged metal housing are CAT6a-compliant and  downward-compatible with previous standards. The technically advanced CAT6 standard presents a  particular challenge for cable designers. It’s a challenge we were happy to tackle!

Shubb C6B Capo for Dobro

670,-

Unlike other Dobro capos that attach only to the strings, the Shubb clamps solidly to the neck to provide great tone. It uses the same patented locking action of our Shubb guitar capo, and it aligns by touching the fret, not by eye, making it fast and accurate. This is the best capo ever put on a resophonic guitar. It is NOT for use on Weissenborn style guitars with hollow necks, because their necks are too deep and too fragile.

Daddario PW-VG-01 VariGrip ...

230,-

D'Addario Accessories Varigrip hand exerciser - PW-VG-01. Håndgrepstrener for strengeinstrumentalister. Alle som spiller et instrument med strenger kan ha nytte av å trene opp hånd- og fingerstyrke for større fleksibiltet på sitt instrument. WW-VG-01 hjelper til med dette. Hver fjærs hardhet/motstand kan justeres individuelt for å tilpasses din individuelle spenning, fra Light til Heavy. Spor på undersiden simulerer strengene på en gitar og hjelper til med å utvikle teknikk samt å beholde opparbeidet træl på fingertuppene, hvis man må være borte fra sitt instrument i en periode. • Perfekt for alle strengeinstrumentalister. • Lett generell spenning for fingerhastigheter og fingerferdighetsopplæring. • Justerbar motstand for hånd, finger og underarmsstyrking. • Reversibelt formstøpt grep simulerer strengene for vedlikehold av træl. • Perfekt for oppvarming og vedlikehold uten instrument. • Ergonomisk utformet for å ligge godt i hånden. Designed to develop and maintain the strength and dexterity of your fingers, hands, and forearms, the Planet Waves Varigrip features an ergonomic design and variable tension that is customizable for each individual finger. The reversible molded grip even uncovers simulated strings to help develop and maintain finger calluses when you are away from your instrument. Planet Waves Varigrip, the ultimate conditioning tool for musicians. Develops and maintains the strength and dexterity of your fingers, hands and forearms Variable tension provides customized conditioning for individual fingers Reversible molded grip uncovers simulated strings to help develop and maintain finger calluses for string musicians Perfect tool for pre-show warm-ups and maintaining conditioning when away from your instrument The ultimate conditioning tool for all musicians Planet Waves, part of the D'Addario family of brands, is known for innovative, problem-solving, quality musical accessories. Planet Waves offers a complete line of award-winning accessories including cables, picks, tuners, capos, straps, humidifiers, maintenance tools and more.

-45%

Omnitronic Wall-mounting N ...

290,-

529,-

Tilbud gjelder kun antall på lager. Stabilt og tiltbart veggstativ for høyttalere med standard 35mm stativkopp. Wall-mounting for all speaker-systems with flange Horizontal and vertical inclination angle adjustable Very stable version Material: Black steel Maximum load: 25 kg Pin: Diameter 35 mm   Length 100 mm Dimensions (WxDxH): 115 x 450 x 550 mm Weight: 3 kg

MXR M101 Phase 90 Pedal

1.695,-

Phase pedal som du blant annet hører på Eddie Van Halens plater. Fungerer også bra med bass, keyboards og vokal. Phase 90 M101 Rich, warm analog tone Add shimmery velocity and dramatic swooshing to your tone The timeless phase shifter used on many classic recordings This device has found its way into many of Eddie Van Halen's recordings, adding a shimmery velocity to lead passages or a more dramatic swoosh to muted strumming. Not just for guitars; it works well with bass, keyboards and even vocals. Vary the speed from a subtle, long cycle to a fast, watery warble...and myriad vintage vibrations in between. Power: Dunlop ECB003 AC Adapter or Single 9 volt battery

Viser 3081 til 3090 (av 3692 produkter)