Midi Solutions Pedal ...

1.899,-

MIDI Solutions Pedal Controller The Pedal Controller accepts an expression pedal (such as the Yamaha FC7 or Roland EV-5 or any potentiometer connected to a 1/4" stereo phone plug) as an input and generates continuous MIDI data based on its position. The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing continuous MIDI data to be sent to any device in a MIDI setup. The Pedal Controller's factory default settings are for it to send CC#7 (volume) on MIDI channel 1, so if this is the message that needs to be sent then no programming is necessary - just insert the Pedal Controller in a MIDI setup and it's ready to use. The Pedal Controller can also be programmed to send other types of MIDI messages, for more info read on... The Pedal Controller can be programmed to send: Aftertouch Pitch Bend Control Change System Exclusive The Pedal Controller includes a MIDI Echo parameter that is selectable on/off. The Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it. Small fluctuations are eliminated when the pedal is in a stationary position and no extraneous messages are sent out. When the pedal is moved slightly, the Pedal Controller will send an update even if its position has only changed by a single value. Many control wheels or knobs only update themselves every two or every four values, resulting in coarser control, and sometimes zipper noise. Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the pedal. This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other. The Pedal Controller is programmed by sending it MIDI System Exclusive messages (read the Programming FAQs for more details). This is easily done with the MIDI Solutions Programming Tools software. Once programmed, its settings are retained even after power is removed. The Pedal Controller can be reprogrammed with new settings as often as needed. The Pedal Controller's factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON. The Pedal Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. Weight: 124 g (4.4 oz.) Dimensions: 112 x 62 x 31 mm (4.4" x 2.4" x 1.2") MIDI Solutions Pedal Controller Block Diagram:

Midi Solutions Power Adapter ...

850,-

Power Adapter The Power Adapter provides power to MIDI Solutions products in instances when it is not available or where a large number of MIDI Solutions products are being chained in series (see FAQs - LED). It's possible to power up to 20 MIDI Solutions products from the Power Adapter's single MIDI Thru output. The Power Adapter has an optically isolated MIDI In, a MIDI Thru, and a power connection for a 9V wall adapter (a 9VAC wall adapter is included with North American orders, international customers can use any 9V wall adapter with standard 2.1 mm barrel connector, AC or DC, any polarity, minimum 50 mA rating). The Power Adapter can also be used in a transmitter/receiver configuration to send MIDI over long distances. We have tested the operation over 4000 ft. of average 2-conductor audio cable, however individual results will vary depending on factors like the type of cable used, electromagnetic noise present, etc. For a good explanation of what to consider when sending MIDI over long distances, see Richmond Sound Design's FAQ on MIDI Cable Length. It may be possible to use only one Power Adapter at the transmitting end, however in this case results are dependent not only on the cable length, but also on the type of MIDI input that the signal is being sent to. Since MIDI inputs from various manufacturers are designed differently, for best results it is recommended that two Power Adapters be used - one at the transmitting end and another at the receiving end.

Midi Solutions Programmable ...

1.899,-

Programmable Input Selector The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output. All MIDI messages, or all MIDI messages except Note messages, can be routed from either of the MIDI inputs. Inputs are switched by a footswitch or contact closure connected to the 1/4" phone jack Fsw input, or by receipt of MIDI Program Change messages appearing at InA. The LED can be programmed to flash in different ways to indicate the state the device is in. The factory default settings for the Programmable Input Selector are for it to toggle between sending all MIDI messages from InA and all MIDI messages from InB. The Programmable Input Selector is programmed by sending it MIDI System Exclusive messages (read the Programming FAQs for more details). For a complete description of the programming options, see the Programmable Input Selector Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Programmable Input Selector can be reprogrammed with new settings as often as needed. The Programmable Input Selector is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs).

Midi Solutions Quadra Merge

1.690,-

MIDI Solutions MultiVoltage Quadra Merge The MIDI Solutions MultiVoltage Quadra Merge merges all MIDI messages appearing at its four MIDI inputs to its two MIDI outputs. All MIDI message types are merged, including System Exclusive, MIDI Clock, and MIDI Time Code messages. A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay. The Quadra Merge is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. MIDI Solutions MultiVoltage products are compatible with both the original 5V and new 3.3V MIDI specifications, for more information read the MultiVoltage FAQ. Weight: 128 g (4.5 oz.) Dimensions: 112 x 62 x 31 mm (4.4" x 2.4" x 1.2")

Midi Solutions Quadra Thru

850,-

MIDI Solutions MultiVoltage Quadra Thru The MIDI Solutions MultiVoltage Quadra Thru is a 1-in 4-out MIDI Thru Box. All MIDI messages appearing at the Quadra Thru's MIDI input are passed to each of its four MIDI Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs. The Quadra Thru is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. MIDI Solutions MultiVoltage products are compatible with both the original 5V and new 3.3V MIDI specifications, for more information read the MultiVoltage FAQ. Weight: 122 g (4.3 oz.) Dimensions: 112 x 62 x 31 mm (4.4" x 2.4" x 1.2")

Midi Solutions R8 ...

5.390,-

MIDI Solutions R8 The MIDI Solutions R8 8-output MIDI-controlled Relay Array contains eight relays which can be programmed to open or close in response to MIDI events. Event types are programmable and include: Note Control Change Program Change System Exclusive Fast reed relays are used for a response time of less than 2 ms. Relay contacts are rated at 500 mA. Contacts are made available via connections at the tip and sleeve of 1/4" mono phone jacks. When switching inductive loads be aware of precautions that must be taken to avoid back EMF problems. The R8 is programmed by sending it MIDI System Exclusive messages (read the Programming FAQs for more details). This is easily done with the MIDI Solutions Programming Tools software. Once programmed, the R8's settings are retained even after power is removed. The R8 can be reprogrammed with new settings as often as needed. The R8 is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. Weight: 2 kg (4.4 lb) Dimensions: 483 x 171 x 44 mm (19" x 6.75" x 1.75")

Midi Solutions Relay

1.899,-

MIDI Solutions Relay The MIDI Solutions Relay contains a relay that can be programmed to open or close in response to MIDI events (for eight relays in a single rack space unit, see the MIDI Solutions R8). Event types are programmable and include: Note Control Change Program Change System Exclusive A fast reed relay is used for a response time of less than 2 ms. Relay contacts are rated at 500 mA. Contacts are made available via connection at the tip and sleeve of a 1/4" mono phone jack. When switching inductive loads be aware of precautions that must be taken to avoid back EMF problems. The Relay is programmed by sending it MIDI System Exclusive messages (read the Programming FAQs for more details). This is easily done with the MIDI Solutions Programming Tools software. Once programmed, its settings are retained even after power is removed. The Relay can be reprogrammed with new settings as often as needed. The Relay is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. Weight: 126 g (4.4 oz.) Dimensions: 112 x 62 x 31 mm (4.4" x 2.4" x 1.2") MIDI Solutions Relay Block Diagram:

Midi Solutions Router

1.899,-

MIDI Solutions Router The MIDI Solutions Router is a 1-in 2-out MIDI data router/filter. Selected MIDI messages can be routed to either, both, or neither of the Router's two MIDI outputs. The Router can route/filter selected ranges of most MIDI data types (see examples). Messages can also be rechannelized to any other MIDI channel. (for on-the-fly rechannelizing, see the MIDI Solutions Footswitch Controller). The Router will accept a total of 10 settings. Settings are stored in a priority format. The Router is programmed by sending it MIDI System Exclusive messages (read the Programming FAQs for more details). This is easily done with the MIDI Solutions Programming Tools software. Once programmed, its settings are retained even after power is removed. The Router can be reprogrammed with new settings as often as needed. The Router is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. Weight: 115 g (4.1 oz.) Dimensions: 112 x 62 x 31 mm (4.4" x 2.4" x 1.2") MIDI Solutions Router Block Diagram:

Midi Solutions T8 MIDI Thru ...

2.690,-

MIDI Solutions MultiVoltage T8 The MIDI Solutions MultiVoltage T8 is a 1-in 8-out MIDI Thru Box. All MIDI messages appearing at the T8's MIDI input are passed to each of its eight MIDI Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs. The T8 is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. MIDI Solutions MultiVoltage products are compatible with both the original 5V and new 3.3V MIDI specifications, for more information read the MultiVoltage FAQ. Weight: 1.9 kg (4.2 lb) Dimensions: 483 x 171 x 44 mm (19" x 6.75" x 1.75")

Midi Solutions Thru

750,-

MIDI Solutions MultiVoltage Thru The MIDI Solutions MultiVoltage Thru is a 1-in 2-out MIDI Thru Box. All MIDI messages appearing at the MIDI input are passed to both MIDI Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs. The Thru box is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it. MIDI Solutions MultiVoltage products are compatible with both the original 5V and new 3.3V MIDI specifications, for more information read the MultiVoltage FAQ. Weight: 114 g (4.0 oz.) Dimensions: 112 x 62 x 31 mm (4.4" x 2.4" x 1.2")

Viser 1981 til 1990 (av 3692 produkter)