Peavey Invective 120 Head

22.995,-

Peavey Invective 120 Head Designed in collaboration with Periphery's Misha Mansoor, this 120W powerhouse will help players achieve the most revered metal sounds, from clean to the most extreme of high-gain tones. Guitarists with heavier tastes looking for their next upgrade will find a sturdy solution in the new Peavey® invective.120 Head. This multi-channel amp head is perfectly suited for players to achieve the most revered metal sounds, from woody and clean to the most extreme of high gain tones. A tube amp only sounds as good as what's inside, and Peavey's invective.120 delivers quality with four matched JJ 6L6GC output tubes with top-loaded bias test points and adjustment. On the rear panel, players will find paralleled speaker outputs with impedance selector, an MSDI direct output with Level/Tone/Ground Lift, MIDI out/thru, and MIDI footswitch input. The included footswitch has nine presets to further help the player achieve their desired tone. A remote switchable rack loop and effects loop, half-power switch, and two 9VDC at 500mA auxiliary power jacks complete the back panel. On the front panel, even more options and advanced control features are available. The invective.120 Head has a single input with four key channels: Clean channel with boost drive and tone; (very) Clean channel with gain/low/mid/high/post; Lead/Crunch channel input with muting gate threshold; and Lead/Crunch channel with boost level and tone. All channels, as well as the channel select with bullet LEDs, are remote switchable. Both the Lead and Crunch channels have independent pre- and post-gain controls as well as shared low/mid/high EQ. The standby and power switches with blue jeweled pilot light indicate when the amp is ready. Just adjust the Master Resonance, Presence and Volume knobs, and it's ready to rock. Specifications: Single input Master Resonance Master Presence Master Volume Shared Low/Mid/High EQ on Lead/Crunch channels Power and Standby switches MIDI / Footswitch Input MIDI Out/Thru 2 x 9VDC at 500mA Auxiliary power jacks Rack Loop (remote switchable) Independent Pre and Post Gain controls on Lead and Crunch channels Effects Loop (remote switchable) Lead/Crunch channel Boost Level & Tone (remote switchable) MSDI Direct Output with Level/Tone/Ground Lift Lead/Crunch channel input muting Gate Threshold (remote switchable) Paralleled speaker outputs with Impedance Selector Channel select with "bullet" LEDs (remote switchable) Half Power switch Clean channel Gain/Low/Mid/High/Post - VERY CLEAN 4 Matched JJ6L6GC output tubes Clean channel Boost Drive & Tone (remote switchable) Top-loaded bias test points and adjustment Blue Jeweled Pilot Light

Peavey Invective Mini Head ...

9.595,-

Peavey Invective Mini Head, Amplifier The best tones from its Invective big brother in a portable 20 W mini head format. In a second collaboration with Periphery guitarist, Misha Mansoor, the new invective™.MH amplifier packs all of the best tones from its 120 W big brother into a much more portable 20 W mini head format. At the heart of this little monster is a pair of EL84 power tubes shaped by three 12AX7/ECC83 preamp tubes, providing everything from pristine cleans to the infinitely chunky gated d’jent destruction. The many features of the invective.MH will satisfy even the most discerning of gear heads. The onboard T.S.I.™ (Tube Status Indication) circuit helps the user diagnose a problem with the power tubes. The bias adjustment pot is located on the top of the small, rugged chassis. Additionally, foot switches allow the invective.MH to engage or disengage the Tight voicing and any combination of Gate and Boost on the Lead channel, respectively. There’s also an independently foot-switchable buffered effects loop. In addition to the great sounds, the invective.MH has all of the recording hooks and flexibility of the other Peavey MH amplifiers, including MSDI™ (Microphone Simulated Direct Interface) Output with XLR and ground lift switch, speaker-simulated USB, speaker defeat switch, power attenuator, headphone out, and more. No matter the venue, this mini amplifier has plenty of oomph for small-to-medium sized gigs and can even work as a backline stage monitor with its attenuator switch directing power at 20 W, 5 W, or 1 W to suit the need. 20 watt (5 watt or 1 watt with power attentuator) Power attentuator EL 84 power tubes, 12AX7/ECC83 preamp tubes 2 Channels Clean channel with high & low EQ Lead channel with 3-band EQ, Tight-mode, Gate & Boost Master Resonance & Master Precence Buffered effect loop XLR DI output (Microphone simulated direct interface) TSI (Tube Status Indicator) Speaker defeat switch Headphone out Footswitch included

Positive Grid BIAS Head 600W ...

10.349,-

ULTRA FLEKSIBEL BIAS Head låter og føles som klassiske boutique rørforsterkere, men gir i tilegg en helt ny og unik fleksibilitet. Den avanserte emuleringen på komponentnivå gir deg varmen, forvrengningen og følelsen av en ekte rørforsterker da den detaljert gjenskaper forsterkeren og alle dens komponenter og hvordan disse oppfører seg i forhold til hverandre. BIAS Head fungerer for alt fra metall til jazz og er designet for fremtiden. ENKEL Å BRUKE Og få tilgang til funksjonene i BIAS Head er enkelt – bare velg en av de 25 presets som finnes og begynn å skru på knottene. Trenger du litt vreng på cleanlyden? Bare legg til et rørtrinn ekstra i preampen. Vil du at sluttrinnet skal føles mer aggressivt? Da er det bare å forandre på kretsen i sluttrinnet slik at de virtuelle sluttrinns rørene presser hardere. Alt er mulig! OMFATTENDE PROGRAMVARE Hvis du ønsker å fordype deg i en verden av forsterker oppsett så kommer BIAS Head med den fantastiske BIAS AMP Pro programvaren ($199 value), som gjør at du du kan gjenskape omtrent hvilken som helst forsterker. Og enda bedre, den gir deg muligheten til å skape en unik forsterker som passer perfekt til deg og din spillestil. Koble til via Bluetooth eller USB og åpne opp en verden av komponenter og opsjoner som tidligere bare har vært tilgjengelig via loddebolt. Velg mellom forskjellige preamps og sluttrinn. Bytt ut rør og transformatorer, legg til clipping dioder og test ut forskjellige likerettere. Alt helt autentisk og alt i real time. ALT FINNES I SKYEN Alle BIAS produkter kan kobles opp mot den unike Positive Grid ToneCloud®. Et skybasert nettsamfunn som er laget spesifikt for gitarister og musikere. Det er mye mer enn et bibliotek av presets og oppsett. Det er et sted for å oppdage nye ideer og nye lyder. Du kan dele dine oppsett med andre brukere eller du kan laste ned oppsett fra musikere, artister og studioer over hele verden. En hel verden av muligheter. AMP MATCH BIAS AMP programvaren har funksjoner Amp Match® innebygget. Den gjør det mulig å analysere en forsterker og legge til den prosesseringen som behøves for matche en custom forsterker til den originale. Du kan også laste ned tonnevis av forsterkere som andre har matchet via ToneCloud®. PERFEKT FOR SPILLEJOBBEN Å velge hvilken forsterker man skal bruke på spillejobben kan være problematisk. Rørforsterkere er ofte tunge å bære med seg og fungerer ofte best på veldig høyt volum. Derfor bruker mange gitarister flere forskjellige forsterkere på spillejobben for å dekke alle behov. Derfor er BIAS Head perfekt til spillejobben. Sluttrinnet på 600W har mer enn nok kraft til å håndtere alle typer scener. Da den i tillegg er superlett og kompakt er det bare en fryd å rigge opp anlegget til spillejobben. NÅ MED REVERB! BEAS Head har nå også innebygget reverb. Eller rettere sagt 9 forskjellige typer reverb. • Gitar forsterker med modellering på komponentnivå • 25 forsterker presets (tusenvis flere via ToneCloud®) • 600-Watt Class D sluttrinns forsterker (600 watts @8 ohms, 300 watts @16 ohms) • Glitchless Mono Effects Loop (loop muter ikke når man skifter patch) • Innbygget Bluetooth Wireless for kontroll via mobile enheter • MIDI In, Out & Thru • USB for tilkopling til Mac eller PC • Komplett BIAS AMP Pro programvare lisens ($199 verdi) • Tonecloud® Integrasjon - backup, last ned og del share presets i skyen • Pedal innganger (2) • Støtter Amp Match® • Vekt kun 5,3 kg

PRS HDRX100 Forsterkertopp ...

38.850,-

PRS HDRX100, 100 Watt Head En 100W vintage-lydende forsterker inspirert av en av Jimi Hendrix personlige forsterkere The PRS HDRX 100 captures the flexibility, power, and balance of late 60’s British-inspired tone. A continuation of PRS’s popular HXDA amplifiers, PRS HDRX amps feature a refined control layout and a newly-documented “Authentic Hendrix” Touring Circuit. This circuit is heavily inspired by one of Hendrix’s personal amps, purportedly used at Woodstock, which Paul Reed Smith and PRS Amp Designer Doug Sewell were able to study in 2018. Designed to push the high-end so it is very clear, but not so much that it’s harsh, the PRS HX shines without glaring and allows for aggression that can be backed off for smooth, sweet tones. The PRS HDRX 100 is driven by four EL34EH power tubes, the best pre-amp tubes available, and a custom-designed Straight Edge output transformer. The power supply and filament design make the HDRX 100 remarkably quiet with little to no amp “hum or hiss.” The PRS HDRX 100 features a 3-band TMB tone stack, 3-way bright switch, high-mid gain switch, and presence controls. These features mirror the historic amp and give players flexibility and increased control of their tone. The PRS HDRX 100 is also designed with internally bridged channels with individual volume controls. This eliminates the need for a jumper cable (historically used on the outside of the amp) and allows players to more easily dial in their distortion level and tone by blending the lead and bass channels’ individual volume controls, bringing more modern convenience to the amp. Made in PRS Guitars Stevensville, Maryland, USA factory, PRS HDRX 100 amps are an exhaustive recreation of tone, a celebration of history, and a monument to modern technology. PRS has also designed matching 2x12 and 4x12 cabinets for the HDRX Amp family. Loaded with modified Celestion G12H-75 Creamback speakers, these cabinets push and punch to complete the package. “Designing the PRS HDRX was not an exercise in over-engineering – it’s a fairly straightforward build with the right parts and circuit. We kept historic specs where it made sense, and we made substitutions based on availability, safety, and experience. In the end, I think we have made a great-sounding amplifier with exceptional build quality and enough power to blow your pantleg when you play it,” Paul Reed Smith. Please note: This is a vintage stock volume amp. PRS recommends using a volume attenuator with these amplifiers. 100 Watt Head 4 x EL34 Power Amp Valves 3 x ECC 803S Preamp Valves Treble & Bass Master Volumes 3-Band EQ, Bass, Middle & Treble Precence Bright Function in 3 Modes: Bright 1, Bright 2 & Off Mid Gain Speaker out: 4, 8 & 16 Ohms 54,71 x 25,4 x 25,4 18,1 Kg

PRS HDRX20 Forsterkertopp 20 ...

9.950,-

PRS HDRX20 20 Watt Valve Head Inspirert av en av Jimi Hendrix sine egne gitartopper, men med en moderne vri The PRS HDRX 20 captures the flexibility, power, and balance of late 60’s British-inspired tone in a lower wattage package. The PRS HDRX 20 features a newly-documented “Authentic Hendrix” Touring Circuit. This circuit is heavily inspired by one of Hendrix’s personal amps, purportedly used at Woodstock, which Paul Reed Smith and PRS Amp Designer Doug Sewell were able to study in 2018. Designed to push the high-end so it is very clear, but not so much that it’s harsh, the PRS HDRX shines without glaring and allows for aggression that can be backed off for smooth, sweet tones. The PRS HDRX 20 is driven by two 5881 power tubes. Chosen for their lower power, smaller size, and organic voice, the 5881 tubes bring thick but articulate tone that drives well and breaks up beautifully in this lower-wattage amp. The PRS HDRX 20 features a 3-band TMB tone stack, 2-way bright switch, high-mid gain switch, and presence controls. These features mirror the historic amp and give players flexibility and increased control of their tone. The PRS HDRX 20 is also designed with internally bridged channels with individual treble and bass volume controls. This eliminates the need for a jumper cable (historically used on the outside of the amp) and allows players to dial in their distortion level and tone more easily by blending the lead and bass channels’ individual volume controls, bringing more modern convenience to the amp. The addition of a Master Volume control on the HDRX 20, a new feature for HDRX amps, is another modern convenience. Players can use the Master Volume to control the power amp section of the HDRX, making it more user friendly for players who do not want to add a volume attenuator to their setup. PRS has also designed a matching PRS HDRX speaker cabinet feature a closed-back design, delivering full-spectrum sound. The Celestion V-type speakers offer a balanced, vintage tone with crisp highs and airy lows. This speaker cabinet is expressive (not boxy) and an ideal pairing with PRS HDRX heads. And with black covering and salt and pepper British-style knitted weave grill cloth and PRS signature logo, PRS HDRX cabinets are a handsome accompaniment as well. 20 Watt Head 2 x 5881 Power Amp Valves 3 x 12AX7 Preamp Valves Treble & Bass Volumes Master Volume 3-Band EQ, Bass, Middle & Treble Precence Bright Function in 3 Modes: Bright 1, Bright 2 & Off Mid Gain Switch Speaker out: 4, 8 & 16 Ohms 43,82 x 22,9 x 22,9 12,2 Kg

PRS HDRX50 Forsterkertopp 50 ...

35.795,-

PRS HDRX50 50 WATT HEAD En 50W vintage-lydende forsterker inspirert av en av Jimi Hendrix personlige forsterkere The PRS HDRX 50 captures the flexibility and balance of late 60’s Britishinspired tone in a powerful 50-watt amplifier. A continuation of PRS’s popular HXDA amplifiers, PRS HDRX amps feature a refined control layout and a newly-documented “Authentic Hendrix” Touring Circuit. This circuit is heavily inspired by one of Hendrix’s personal amps, purportedly used at Woodstock, which Paul Reed Smith and PRS Amp Designer Doug Sewell were able to study in 2018. Designed to push the high-end so it is very clear, but not so much that it’s harsh, the PRS HX shines without glaring and allows for aggression that can be backed off for smooth, sweet tones. The PRS HDRXX 50 is driven by a pair of EL34EH power tubes, the best pre-amp tubes available, and a custom-designed Straight Edge output transformer. The HX 50 has the documented 100 watt power supply, which makes it sound much closer to the 100 watt amplifier than a normal 50 watt amp. The power supply and filament design also make the HDRX100 remarkably quiet with little to no amp “hum or hiss.” The PRS HDRX 50 features a 3-band TMB tone stack, 3-way bright switch, highmid gain switch, and presence controls. These features mirror the historic amp and give players flexibility and increased control of their tone. The PRS HDRX 50 is also designed with internally bridged channels with individual volume controls. This eliminates the need for a jumper cable (historically used on the outside of the amp) and allows players to more easily dial in their distortion level and tone by blending the lead and bass channels’ individual volume controls, bringing more modern convenience to the amp. Made in PRS Guitars Stevensville, Maryland, USA factory, PRS HDRX 50 amps are an exhaustive recreation of tone, a celebration of history, and a monument to modern technology. PRS has also designed matching 2x12 and 4x12 cabinets for the HDRX Amp family. Loaded with modified Celestion G12H-75 Creamback speakers, these cabinets push and punch to complete the package. “Designing the PRS HDRX was not an exercise in over-engineering – it’s a fairly straightforward build with the right parts and circuit. We kept historic specs where it made sense, and we made substitutions based on availability, safety, and experience. In the end, I think we have made a great-sounding amplifier with exceptional build quality and enough power to blow your pantleg when you play it,” Paul Reed Smith. Please note: This is a vintage stock volume amp. PRS recommends using a volume attenuator with these amplifiers. 50 Watt Head 2 x EL34 Power Amp Valves 3 x ECC 803S Preamp Valves Treble & Bass Master Volumes 3-Band EQ, Bass, Middle & Treble Precence Bright Function in 3 Modes: Bright 1, Bright 2 & Off Mid Gain Speaker out: 4, 8 & 16 Ohms 54,71 x 25,4 x 25,4 10,5 Kg

PRS Tremonti MT15-V2 Head ...

12.750,-

PRS MT15-V2 Tremonti Head Forsterkertopp, 15 W eller 7 W, rør i for- og sluttrinn, 6L6GCM sluttrinnsrør, 12AX7 preamp-rør, Lead- og Clean-kanaler med separate volum- og tonekontroller, effektsløyfe. MT15 er en tokanals forsterkertopp der en tett hi-gain kombineres med en klar artikulasjon og bite. Med sin store og sterke lyd leverer MT15-V2 mer enn størrelsen skulle tilsi, så tunge riff og soloer med mye forvrengning er ikke noe problem, mens den rene kanalen leverer det den skal, en ren lyd.  Forsterkeren har 4 stk ECC-83 er et rør i forforsterkeren og er designet for en kraftig tone med fokus på et stramt lavt register uten å miste artikulasjon eller bitt i toppen. I tillegg har Lead-kanalen en Overdrive-funksjon som bytter mellom 2 stk av forforsterkerrørene for å gi en rik mellomtone med en mer vintage-karakter.  Clean-kanalen har en lys, ren tone som fungerer like bra for akkorder og fingerstyle-spilling, og det finnes også en Boost-funksjon som gir et snev av overdrive for å gi den klassiske crunch-lyden.  Uansett hvilken kanal du velger eller hvilken lyd du stiller inn, leverer MT15 en balansert tone over hele registeret som aldri blir slem eller bitende.  Hvis du bruker alle 15 wattene, kan det føles som om du spiller på en «50-watter». Dette kompakte forsterkerhodet er så kraftig at du kan senke effekten ned til 7 watt for å kunne presse forsterkeren selv ved lavere volum. “We knew we wanted a low-wattage amp. The challenge was getting a lot of tone and features in a little box. We’re all blown away with how it turned out. It’s going to be great for someone to take it out of the box, set everything to noon, and have it sound great.” – Mark Tremonti Rørforsterker 15 eller 7 watt, valgbar 2 x 6L6GCM-STR effektforsterker-rør 4 x 12AX7 (ECC83) forforsterker-rør Faseomformer, 12AX7 rør Lead and Clean-kanaler Overdrive-funksjon på Lead-kanalen Boost-funksjon på Clean-kanalen Separate volum- og tonekontroller for hver kanal Mastervolum Presence-kontroll Seriell rørdrevet effektsløyfe (12AX7) 16 ohm, 8 ohm og 2 x ohm høyttalerutganger Bias-justering 35,5 x 22,9 x 25,4 cm 8,1 kg

Revv D20 Lunchbox Tube Head ...

15.560,-

Revv D20 The ultimate pedal-platform tube amp Revv is well known in the industry for building stellar handmade all- tube amplifiers in Canada. These boutique amps are highly sought after by touring and recording artists all over the world. However, not everyone needs or can afford a full tube-driven rig. On top of this, practicing, recording at home and silent playing on these tonal monsters can be problematic for most, without even more high-end equipment. Meet the D20. This all-tube 20-watt head is the first ever amplifier to feature built in Two Notes Torpedo cab simulation and switchable internal reactive load, to retain your organic feel and tone when playing without a cab. D20 hosts the world’s finest virtual cabinets, virtual mics, speakers, EQ, and reverb wholly on-board for direct recording, silent playing with headphones and live performance to a front of house PA mix. Being compatible with Torpedo Remote software to fully customise your tone, via USB, makes D20 perfect for players looking to make their rigs even more portable and fly-in-friendly. Revv set out to build an amp that not only has this new modern feature set, but still sounded incredible on its own as a standalone amplifier. The output can be switched into a 4-watt mode (great for low-volume practice situations) and with a push/pull gain knob for signature Dynamis cleans or characterful crunch and dirt, is a perfect platform for your favourite pedals. In addition, in reactive load direct mode, the “Pre/Post” switch selects whether the power amp is in the signal chain. This is so you can also take advantage of Two Notes’ power amp simulations and dramatically change the character of the D20 with virtual tubes, such as EL84 etc., for even more tonal variation. The result is an amp package that is convenient, yet truly great sounding and all at a great price. Specs All tube (2x 6V6 and 2x 12AX7) – switchable from 20 to 4 watts output Embedded Torpedo Reactive Load & Virtual Cabinets/Mics/EQ/Reverb• Inspiring Clean and Crunch tones – developed with Nashville session guitarists Perfect platform for your favourite gain pedals 3-band EQ, Volume & Gain controls Push/Pull gain pot for 2nd crunchier voicing Buffered Series FX Loop Switchable 4/8 Ohm speaker jack XLR Balanced DI, USB and Ground Lift 6 Pre-Loaded Virtual Cabinets selectable via front knob – all customisable. Up to 128 Torpedo presets via MIDI Reactive Load auto engages when speaker is not detected – preserves amp tubes Headphone Out with adjustable level Easily-accessible Rear-Bias test ports Durable, lightweight aluminium ‘lunchbox style’ enclosure Foldable carry handle Made in Canada

Revv G20 Lunchbox Tube Amp 2 ...

16.190,-

Revv G20 Signature high gain in a lunchbox head Following on from the successful D20 launch in 2019, the world’s first amplifier to feature built in Two notes Torpedo cab simulation and switchable internal reactive load, meet the G20 – the next evolution of Revv’s lunchbox tube amp line. The D20 became an instant hit with guitarists worldwide for its organic tone & ability to play, record, and perform direct without a cabinet. But, Revv also heard guitarists loud & clear – you want signature Revv high gain in an affordable, compact, Torpedo-embedded head. It’s here. Incorporating Revv’s signature clear high-gain tube-driven purple channel, with three Aggression levels and a wide switch to shape tone, G20 is a no-compromise solution for players who demand perfect tone every time. Plus, the ability to switch channel, voices and the Two notes settings via MIDI (or optional preset footswitch) makes this amp the complete rig to drop into any live or studio situation. G20 hosts the world’s finest virtual cabinets, virtual mics, speakers, EQ, and reverb wholly on-board for direct recording, silent playing with headphones and live performance to a front of house PA mix. Plus, in reactive load direct mode, the “Pre/Post” switch selects whether the power amp is in the signal chain. This is so you can also take advantage of Two notes’ power amp simulations and dramatically change the character of the D20 with virtual tubes, such as EL84 etc., for even more tonal variation. Revv set out to build an amp that not only has this new modern feature set, but still sounded incredible on its own as a standalone amplifier into a cab if the need arises. The 20w output plays well with a variety of cabinets, but can also be switched into a 4-watt mode – great for low-volume practicing. The result is a complete amp package that is convenient, yet truly great sounding and all at a great price. Specs Revv’s signature clear high gain tube purple channel Clean channel with shared EQ 3-band EQ, Volume & Gain controls, 3 Aggression levels & wide switch to shape tone Clean channel with shared EQ 3-band EQ, Volume & Gain controls All tube (2x 6V6 and 2x 12AX7) – switchable from 20 to 4 watts output Embedded Two notes Torpedo Reactive Load & Virtual Cabinets/Mics/EQ/Reverb Buffered Series FX Loop Switchable 4/8 Ohm speaker jack XLR Balanced DI, USB and Ground Lift 6 Pre-Loaded Virtual Cabinets selectable via front knob – all customisable. Up to 128 Torpedo presets via MIDI Reactive Load auto engages when speaker is not detected – preserves amp tubes Headphone Out with adjustable level Easily-accessible Rear-Bias test ports Durable, lightweight aluminium ‘lunchbox style’ enclosure High-Quality Transformers Foldable carry handle Includes carry case Made in Canada

Revv Generator 100P MKIII ...

33.590,-

REVV GENERATOR 100P MK3 The modern guitarist’s best-friend gets even more aggression & a Two notes upgrade. Go Direct – Stereo direct out Two notes Audio Engineering Torpedo-embedded reactive load & DynIR Virtual Cabinets Revv’s Trademark Gain – Multi-voice Purple Channel for razor-sharp high gain clarity No Compromise Clean – Organic, touch-sensitive Nashville cleans & crunch with independent EQ 100% Tube – Handmade in Canada with premium components Fully Controllable – Recall presets or send commands via footswitch or MIDI Noise Gate & Reverb – State-of-the-art & built right in The Revv Amplification Generator 100P quickly became a favorite of modern rock & metal musicians worldwide for its mix-ready high gain clarity. So when it came for MK3, we knew we had to build on that legacy. What is MK3? MK3 is the world’s first line of stereo-direct-output reactive load & impulse response tube amps. Not only does the Generator 100P MK3 bring you 3 channels of all-tube finely-tuned boutique Canadian tone based on feedback from world-class touring artists, session guitarists, & audio engineers – it also features Two notes Audio Engineering Torpedo-embedded DynIR Virtual Cabinet technology for going direct to FOH, studio monitors, or headphones. No cabinet required. But it doesn’t stop there! A state-of-the-art noisegate & lush reverb are built right in! All accompanied by a host of switching & voicing updates to make getting the sound in your head faster than ever. Generator 100P MK3 features 3 of Revv Amplification’s channels, each an original circuit! Its high gain Purple Channel is famous for its razor-sharp metal note separation, & now in MK3 it receives additional low end & even more saturation with no loss in tightness. Another MK3 upgrade is a fully independent EQ for each channel. Take full control of all 3 channels! The clean Blue Channel is chimey with tons of headroom, & now includes a “Wide” switch to give you a wide-range frequency boost for more push & sustain. The crunch Green Channel feature 3 all-new drive modes to take this dynamic channel from edge of breakup, to clear overdrive, to classic stack tones. Revv Amplification is committed to bringing you the most complete amplifier experience available. Clarity, feel, & tone – for stage, studio, & home. FEATURES All tube design – 4 – 12AX7 , 4 – 6L6GC 3 Channels: Clean, Crunch and High Gain 3 band EQ per channel Signature Wide, Drive, and Aggression switches Bright switch on all channels Cut switch on both overdrive channels allows for brighter distortion or a deeper/scooped type of distortion by shifting mid range frequencies Fat switch on both overdrive channels to thicken your high gain tones Built in digital reverb Built in noise gate Dual master volume controls Presence and depth controls Two notes Torpedo-embedded Virtual Cabinet selector Headphone output jack Two notes editable via Bluetooth Illuminated color changing acrylic badge LED lighting for control verification MIDI capabilities as well as CC control of all functions and OMNI functionality for easy MIDI programming control Foot switch included with regular switching duties (channels, wide, drive, aggression levels, FX loop, masters and mute) plus patch mode which saves your favorite amplifier settings to one of the 6 banks Cabinet lighting port to illuminate speaker cabinet badge Transparent serial effects loop 4, 8, 16 ohm output impedance speaker output jacks Internal load (automatically engages when no cabinet is detected) Power scaling from 120w down to 10w Ground lift switch Two notes Torpedo-embedded Stereo XLR Outputs Rear Bias test points with easily accessed adjustments for each power tube pair as well as tube fault indication Birch head shell Dimensions: 26.5” × 10” × 10.5” Weight: 46 lbs Handcrafted in Canada with high quality standards of both sound and build 5-Year limited warranty International Voltages Available: 100V, 120V, 220V, 230V, 240V

Revv Generator 100R MKIII ...

33.590,-

GENERATOR 100R MK3 A new voice of thick distortion ready for stage, studio, & home. Go Direct – Stereo direct out Two notes Audio Engineering Torpedo-embedded reactive load & DynIR Virtual Cabinets Revv’s Trademark Gain – Multi-voice Red Channel brings thick, warm gain for all genres No Compromise Clean – Organic, touch-sensitive Nashville cleans & crunch with independent EQ 100% Tube – Handmade in Canada with premium components Fully Controllable – Recall presets or send commands via footswitch or MIDI Noise Gate & Reverb – State-of-the-art & built right in FEATURES All tube design – 5 – 12AX7 , 4 – 6L6GC 3 Channels: Clean, Crunch and High Gain 3 band EQ per channel Signature Wide, Drive, and Aggression switches Bright switch on all channels Cut switch on both overdrive channels allows for brighter distortion or a deeper/scooped type of distortion by shifting mid range frequencies Fat switch on both overdrive channels to thicken your high gain tones Built in digital reverb Built in noise gate Dual master volume controls Presence and depth controls Two notes Torpedo-embedded Virtual Cabinet selector Headphone output jack Two notes editable via Bluetooth Illuminated color changing acrylic badge LED lighting for control verification MIDI capabilities as well as CC control of all functions and OMNI functionality for easy MIDI programming control Foot switch included with regular switching duties (channels, wide, drive, aggression levels, FX loop, masters and mute) plus patch mode which saves your favorite amplifier settings to one of the 6 banks Cabinet lighting port to illuminate speaker cabinet badge Transparent serial effects loop 4, 8, 16 ohm output impedance speaker output jacks Internal load (automatically engages when no cabinet is detected) Power scaling from 120w down to 10w Ground lift switch Two notes Torpedo-embedded Stereo XLR Outputs Rear Bias test points with easily accessed adjustments for each power tube pair as well as tube fault indication Birch head shell Dimensions: 26.5” × 10” × 10.5” Weight: 46 lbs Handcrafted in Canada with high quality standards of both sound and build 5-Year limited warranty International Voltages Available: 100V, 120V, 220V, 230V, 240V

Revv Generator 120 MKIII ...

44.790,-

GENERATOR 120 MK3 Go direct to FOH, studio monitors, or headphones with 4 fine-tuned all-tube channels. Go Direct – Stereo direct out Two notes Audio Engineering Torpedo-embedded reactive load & DynIR Virtual Cabinets Revv’s Trademark Gain – Totally unique, tight & full, with multi-voice switching No Compromise Clean – Organic, touch-sensitive Nashville cleans & crunch 100% Tube – Handmade in Canada with premium components Fully Controllable – Recall presets or send commands via footswitch or MIDI Noise Gate & Reverb – State-of-the-art & built right in FEATURES All tube design – 5 – 12AX7 , 4 – 6L6GC 4 Channels: Clean, Crunch and two switchable, variable gain channels 3 band EQ per channel Signature Wide, Drive, and Aggression switches Bright switch on all channels Cut switch on both overdrive channels allows for brighter distortion or a deeper/scooped type of distortion by shifting mid range frequencies Fat switch on both overdrive channels to thicken your high gain tones Built in digital reverb Built in noise gate Dual master volume controls Presence and depth controls Two notes Torpedo-embedded Virtual Cabinet selector Headphone output jack Two notes editable via Bluetooth Illuminated color changing acrylic badge LED lighting for control verification MIDI capabilities as well as CC control of all functions and OMNI functionality for easy MIDI programming control Foot switch included with regular switching duties (channels, wide, drive, aggression levels, FX loop, masters and mute) plus patch mode which saves your favorite amplifier settings to one of the 6 banks Cabinet lighting port to illuminate speaker cabinet badge Transparent serial effects loop 4, 8, 16 ohm output impedance speaker output jacks Internal load (automatically engages when no cabinet is detected) Power scaling from 120w down to 10w Ground lift switch Two notes Torpedo-embedded Stereo XLR Outputs Rear Bias test points with easily accessed adjustments for each power tube pair as well as tube fault indication Birch head shell Dimensions: 26.5” × 10” × 10.5” Weight: 46 lbs Handcrafted in Canada with high quality standards of both sound and build 5-Year limited warranty International Voltages Available: 100V, 120V, 220V, 230V, 240V

Suhr Bella Head ...

33.390,-

Bella is a portable, American voiced, hand-wired, all-tube amplifier, designed to be the ideal grab-n-go amplifier and the ultimate platform for your pedalboard. Bella’s simple and easy to use controls (including Boost and 3-position Bright switch) make it a snap to tailor the amp to your favorite boost, overdrive, fuzz and distortion pedals; while the effects loop is the ideal place for all of your chorus, flange, delay, and reverb pedals. Bella is powered by a duet of 6L6GC power tubes that deliver either 22 or 44 Watts of Class A/B power and is available in a head or combo format, with or without reverb. 100% HANDWIRED Each Bella amplifier is meticulously hand wired, assembled, and tested in our Lake Elsinore, CA factory. SELECTABLE WATTAGE The Bella can be selected to run at either 44 or 22 watts. Choose 44 watts when you need the boldest tone with the most clean headroom. Choose 22 watts when you want the amp to break up sooner and at lower volumes. SWITCHABLE BOOST & BRIGHT TWO POSITION BOOST: This 2-position switch varies Bella’s input gain stage via the front panel or the footswitch (sold separately) jack located on the back of the amplifier. Engaging the boost provides +6dB of boost at the first gain stage. THREE POSITION BRIGHT: The bright switch has three selections available. In the down position: the Bright switch is out of the circuit. In the middle position: Bella introduces a modest amount of brightness that brings out the guitar’s upper frequencies. If you desire more organic chime, set Bella’s Bright switch to the up position. This position naturally opens up the top-end, allowing all of your guitar’s higher frequencies to shine through. TRANSPARENT EFFECTS LOOP Bella is equipped with a full-featured, all-tube series effects loop which performs equally well with pedals and line-level rack gear via the loop’s independent send and return controls. The effects loop was designed to be extremely clean and transparent, making it the ultimate effects platform. YOUR PEDALS HAVE NEVER SOUNDED SO GOOD Bella has been specially designed with your pedals in mind and it’s the ultimate, clean, pedal platform. It responds to virtually any pedal in a tone-full way and even the bright switch is friendly with most overdrives and distortions. OUTPUT: Switchable 44/22 Watts RMS PREAMP TUBES: 3x 12AX7 POWER TUBES: 2x 6L6GC REVERB: No EFFECTS LOOP: Tube driven, buffered, with independent send and return levels. SPEAKER: Sold Seperately FRONT PANEL: Input, Boost Switch (2-Position), Bright Switch (3-Position), Volume, Treble, Bass, and Presence, Standby/Wattage Selector Switch, and On/Off Power Switch BACK PANEL: Mains Input Inlet, Mains Fuse, H.T. Fuse, Speaker Impedance Selector: (2Ω, 4Ω, & 8Ω), 2-External Speaker Outputs, Effects Loop Return Level, Return and Send Jacks, Send Level, In/Out Switch and Boost Footswitch* Jack. *Footswitch sold separately. DIMENSIONS: 24” (W) x 9.90” (D) x 10.4” (H) WEIGHT: 35lbs

Suhr Bella Reverb Head ...

38.990,-

Bella is a portable, American voiced, hand-wired, all-tube amplifier, designed to be the ideal grab-n-go amplifier and the ultimate platform for your pedalboard. Bella’s simple and easy to use controls (including Boost and 3-position Bright switch) make it a snap to tailor the amp to your favorite boost, overdrive, fuzz and distortion pedals; while the effects loop is the ideal place for all of your chorus, flange, delay, and reverb pedals. Bella is powered by a duet of 6L6GC power tubes that deliver either 22 or 44 Watts of Class A/B power and is available in a head or combo format, with or without reverb. 100% HANDWIRED Each Bella amplifier is meticulously hand wired, assembled, and tested in our Lake Elsinore, CA factory. SELECTABLE WATTAGE The Bella can be selected to run at either 44 or 22 watts. Choose 44 watts when you need the boldest tone with the most clean headroom. Choose 22 watts when you want the amp to break up sooner and at lower volumes. SWITCHABLE BOOST & BRIGHT TWO POSITION BOOST: This 2-position switch varies Bella’s input gain stage via the front panel or the footswitch (sold separately) jack located on the back of the amplifier. Engaging the boost provides +6dB of boost at the first gain stage. THREE POSITION BRIGHT: The bright switch has three selections available. In the down position: the Bright switch is out of the circuit. In the middle position: Bella introduces a modest amount of brightness that brings out the guitar’s upper frequencies. If you desire more organic chime, set Bella’s Bright switch to the up position. This position naturally opens up the top-end, allowing all of your guitar’s higher frequencies to shine through. TRANSPARENT EFFECTS LOOP Bella is equipped with a full-featured, all-tube series effects loop which performs equally well with pedals and line-level rack gear via the loop’s independent send and return controls. The effects loop was designed to be extremely clean and transparent, making it the ultimate effects platform. YOUR PEDALS HAVE NEVER SOUNDED SO GOOD Bella has been specially designed with your pedals in mind and it’s the ultimate, clean, pedal platform. It responds to virtually any pedal in a tone-full way and even the bright switch is friendly with most overdrives and distortions. OUTPUT: Switchable 44/22 Watts RMS PREAMP TUBES: 3x 12AX7 POWER TUBES: 2x 6L6GC REVERB: No EFFECTS LOOP: Tube driven, buffered, with independent send and return levels. SPEAKER: Sold Seperately FRONT PANEL: Input, Boost Switch (2-Position), Bright Switch (3-Position), Volume, Treble, Bass, and Presence, Standby/Wattage Selector Switch, and On/Off Power Switch BACK PANEL: Mains Input Inlet, Mains Fuse, H.T. Fuse, Speaker Impedance Selector: (2Ω, 4Ω, & 8Ω), 2-External Speaker Outputs, Effects Loop Return Level, Return and Send Jacks, Send Level, In/Out Switch and Boost Footswitch* Jack. *Footswitch sold separately. DIMENSIONS: 24” (W) x 9.90” (D) x 10.4” (H) WEIGHT: 35lbs

Suhr Hombre Head ...

25.990,-

Hombre, Suhr’s take on the classic Brownface tones that have inspired John Suhr since his early days as a guitarist. The intention was clear: create a modern take on these classic designs while preserving the vintage heritage. The purity of the signal path is part of Hombre’s beauty. It results in a playing experience that is incredibly dynamic and touch-sensitive. A simple turn of the volume and tone controls will put a shocking range of sound at your fingertips. Clean tones are classic, gorgeous and bell-like, but make no mistake, this amp is a dirty little combo. It wants to be pushed into sweet overdrive, conjuring tones from the 1970s era of Texas blues-rock. The onboard Dynamic Tube Bias tremolo imparts an unmistakably rich, sought after sound, that simply can’t be imitated. Hombre is driven by a ~18-watt 6V6 power section. PURE SIGNAL PATH Hombre features a Normal and Bright channel with straightforward Volume and Tone controls. A simple, transparent signal path is something many players find alluring due to the purity of tone and superb dynamic range. Our goal was to maintain the vintage characteristics while simultaneously making some improvements to the design. Painstaking attention was given to the component layout and signal path to reduce noise. Hombre is equipped with custom made transformers that are wound on paper bobbins and made in the USA. DYNAMIC TUBE BIAS TREMOLO Bias Tremolo circuits are truly unique in that the effect is created by modulating the bias of the power tubes. As the power tube bias is lowered and raised, it imparts an unmistakably rich, sought after sound, that only a Tube Bias Tremolo can. There’s a distinct interaction that exists between the tremolo and the dynamics of the musician. The intensity of the tremolo can be influenced by how hard or soft the guitar is played. When the amp is pushed harder, or the musician plays harder, the tremolo effect is less noticeable, yet as the signal decays the effect becomes more apparent. This results in a stunning effect that lives and breathes with the music. VOLTAGE: 230V CONTROLS: Volume, Tone (Normal). Volume, Tone (Bright). Speed, Intensity (Tremolo) EFFECTS: Foot-switchable Tube-Biased Tremolo (Active In Normal & Bright Inputs) INPUTS: 2x Normal, 2x Bright WATTAGE: 18 watts SPEAKER OUTPUTS: 2 OPERATING IMPEDANCE: 8Ω (safe to operate at 4Ω or 16Ω - see user guide) CABINET MATERIAL: Box Jointed Pine TOLEX: Vintage Palomino Nubtex GRILL CLOTH: Tan/Brown Wheat SPEAKER: Speaker cabinet sold separately PREAMP TUBES: 3x 12AX7 POWER TUBES: 2x 6V6 RECTIFIER TUBE: 1x 5AR4 FOOT-SWITCH: Includes single button foot-switch for tremolo activation DIMENSIONS: 20.84" W x 9.23" H x 8.3" D WEIGHT: 18.6lbs

Viser 31 til 45 (av 50 produkter)