Shure SM81 LC Kardioide Kond. ...

6.195,-

Klassiker til hihat og overhead - eller til kor. Shure SM81LC er en klassisk kondensatormikrofon for instrumenter. Bredt frekvensområde 20-20000 Hz gjør den egnet til variert studio- og PA-bruk. SM81LC har stillbart basskuttfilter. En klassiker til overhead! Features The SM81 is ruggedly constructed. It operates on phantom power and performs over a wide range of temperatures and humidity conditions. It is furnished with a swivel adapter, attenuator-switch lock, foam windscreen, and case for carrying and storage. Other accessories are available. 0 Hz to 20 kHz frequency response Flat response curve for accurate reproduction of sound sources Low noise and high output clipping level Low distortion over a wide range of load impedances Cardioid polar pattern, uniform with frequency and symmetric about axis, providing maximum rejection and minimum coloration of off-axis sounds Low RF susceptibility Selectable low-frequency response: flat, 6 or 18 dB/octave rolloff 0 dB/10 dB lockable attenuator switch Phantom powering (DIN 45 596 voltages of 12 to 48 Vdc) Rugged steel construction for durability Field-usable over wide range of temperature and humidity conditions Specs Type Condenser (electret bias) Frequency Response 20 to 20,000 Hz Polar Pattern Cardioid (unidirectional) response-uniform with frequency, symmetrical about axis Output Impedance Rated at 150 ohms (85 ohms actual) Recommended minimum load impedance: 800 ohms (May be used with loads as low as 150 ohms with reduced clipping level) Output Configuration and Connector Balanced, transformer-coupled output; male XLR connector Sensitivity (at 1,000 Hz) Open Circuit Voltage: -45 dBV/Pascal (5.6 mV (1 Pascal = 94 dB SPL) Clipping Level (at 1,000 Hz) 800 ohm Load: -4 dBV (0.63 V) 150 ohm Load: -15 dBV (0.18 V) Total Harmonic Distortion Less than 0.5% (131 dB SPL at 250 Hz into 800 ohm load) Maximum SPL (at 1,000 Hz) 800 ohm load: 136 dB (attenuator at 0) 146 dB (attenuator at -10) 150 ohm load: 128 dB (attenuator at 0) 138 dB (attenuator at -10) Hum Pickup -3 dB equivalent SPL in a 1 mOe field (60 Hz) Self-Noise (equivalent sound pressure levels; measured with true rms voltmeter) 16 dB typical, A-weighted 19 dB typical, weighted per DIN 45 405 Signal-to-Noise Ratio 78 dB (IEC 651)* at 94 dB SPL *S/N ratio is difference between 94 dB SPL and product's equivalent self noise (SPL A-weighted). Overvoltage and Reverse Polarity Protection Max. external voltage applied to pins 2 and 3 with respect to pin 1: +52 Vdc Reverse polarity protection: 200 mA max. (diode-clamped) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 Cartridge Capacitance 54 pF Low Frequency Response Switch Positions Flat; -6 dB/octave below 100 Hz; -18 dB/octave below 80 Hz Attenuator Switch Positions (Lockable) 0 or -10 dB Power Supply Voltage: 11 to 52 Vdc, positive, pins 2 and 3 Current Drain: 1.2 mA max. Environmental Conditions Temperature: Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) Operating: -6.7 degrees to 49 degrees C (20 degrees to 120 degrees F) Humidity: Storage 0 to 95% relative humidity at room temperature (72 degrees to 80 degrees F, 22 degrees to 27 degrees C) Case Steel construction with vinyl metallic paint finish and stainless steel screens Dimensions See User Guide Weight Net: 230 grams (8 oz) Packaged: 740 grams (1 lb 10 oz)

Sontronics STC-1S Silver ...

5.159,-

STC-1S Silver Stereomatchet par av STC-1 Silver Fine mikrofoner til f.eks. innspilling av små band, kor eller symfoniorkester. Levereres med treboks, mikrofonholdere og skinne for å montere paret på ett stativ. Livstidsgaranti ved registrering. The Sontronics STC-1S is a stereo pair of Sontronics STC-1 cardioid pencil microphones, ideally suited to stereophonic recording, whether you're capturing a four-piece band, a choir or a full symphony orchestra.   The variable filter (0, 75, 150Hz) and pad (0, -10, -20dB0 switches further enhance their versatility, allowing you to record many instrument sources, either acoustic or amplified.   The Sontronics STC-1S comes in a luxury wooden case with mounting clips, windshields and a stereo mounting bar. It is also compatible with the Sontronics OMNI and HYPER capsules. The STC-1S pair (and the capsules) are available in classic silver or satin black and, like all our mics, are covered by our Sontronics Lifetime Warranty and come with a FREE download of Toontrack EZMix 2 Lite.

Sony ECM-673 short shotgun ...

5.220,-

The ECM-673 is a short shotgun (20 cm), electret condenser-type microphone, which delivers excellent sound performance in field and studio production applications at an affordable price. This microphone is also tailored for use with HDV type camcorders.  The highly sensitive capsule results in great detail and pristine audio quality   Specifications Capsule Type  Mono Electret Condenser Frequency Response  40 Hz to 20 kHz Directivity Uni-directional (super-cardioid) Sensitivity *[1]  -36 dB ±3 dB Output Impedance *[2]  220O±20%, Balanced Dynamic Range  107 dB or more Signal-to-Noise Ratio *[3]  77 dB or more Inherent Noise *[4]  17 dB SPL or less Induction Noise From External Magnetic Field *[5]  0 dB SPL or less Wind Noise *[6] 50 dB SPL (without windscreen), 45 dB SPL or less (with windscreen) Maximum Input Sound Pressure Level *[7]  124 dB SPL   Low Frequency Roll-Off Built-In Switch Dimensions 7.87 x 0.78" (200 x 20mm) (Length x Diameter) Weight Approx. 4.76 oz (135g)

Sony ECM-674 short shotgun ...

6.640,-

The Sony ECM-674 is an affordable shotgun-type (27 cm) electret condenser microphone, which delivers excellent sound performance in field and studio productions. Offering high-sensitivity, low-noise characteristics and flat-and-wide frequency response in a compact and lightweight design. The ECM-674 is well-suited for use with Sony camcorders such as the HDV™ Series, DVCAM™ Series, and XDCAM™ Series. In addition, its two-way powering feature allows for phantom powering or battery operation. With its high performance, affordable price, and great versatility, the ECM-674 microphone is an ideal choice for a range of sound-acquisition applications.       Super Cardiod Electret Condenser Shotgun Microphone, Battery or Phantom Powered.   Specifications   Capsule Type Mono Electret Condenser Frequency Response 40 Hz to 20 kHz Directivity Uni-directional (super-cardioid) Sensitivity *[1] -36 dB ±3 dB Output Impedance *[2] 220O±20%, Balanced Dynamic Range Phantom: 107 dB or more // Battery: 98 dB or more         Signal-to-Noise Ratio *[3] 77 dB or more Inherent Noise *[4] 17 dB SPL or less Induction Noise From External Magnetic Field *[5] 0 dB SPL or less Wind Noise *[6] 50 dB SPL (without windscreen), 45 dB SPL or less (with windscreen) Maximum Input Sound Pressure Level *[7] Phantom: 124 dB SPL // Battery: 115 dB SPL   Dimensions 10.55 x 0.78" (268 x 20mm) (Length x Diameter)

Sony ECM-680S stereo shotgun ...

14.640,-

The ECM-680S is an MS stereo shotgun , electret condenser microphone (25 cm), ideal for a broad range of field production and broadcast studio applications. Incorporating newly developed microphone capsules, the ECM-680S offers excellent sensitivity, low inherent noise, and a flat-and-wide frequency response. The most distinguished feature of the ECM-680S is its switchable operation between a highly directional monaural mode and stereo mode.   Monaural mode provides highly directional sound pickup, while stereo mode delivers natural and spatial sound. The MS microphone signal of the ECM-680S is internally decoded and it provides L and R (stereo) outputs. The ECM-680S is supplied with a XLR-5-pin to XLR-5 pin cable for use with 5-pin XLR input equipped camcorders. The optional EC05X5F3M (formally known as K-1504) cable should be used when connecting the ECM-680S stereo shotgun with camcorders having two 3-pin XLR inputs.   Uni-directional Mono/Stereo (Switchable) Electret Condenser Shotgun Microphone, Phantom Powered   Specifications   Capsule Type Stereo MS Electret Condenser Frequency Response Stereo: 50 Hz to 20 kHz Frequency Response Monaural: 40 Hz to 20 kHz Directivity Stereo: Uni-directional Directivity Monaural: Super-cardioid Sensitivity *[1] Stereo: -28 dB ±3 dB Monaural: -32 dB ±3 dB Output Impedance *[2] 100O±20%, Balanced Dynamic Range Stereo: 104 dB or more                           Monaural: 106 dB or more Signal-to-Noise Ratio *[3] Stereo: 74 dB or more                                            Monaural: 76 dB or more Inherent Noise *[4] Stereo: 21 dB SPL or less                                  Monaural: 20 dB SPL or less Induction Noise From External Magnetic Field *[5] 0 dB SPL or less Wind Noise *[6] 60 dB SPL or less (with windscreen), 55 dB SPL (without windscreen) Maximum Input Sound Pressure Level *[7] 124 dB SPL   The short cable supplied with the ECM-680S Stereo Shotgun Mic can be used for connection on camcorders with a 5-pin XLR input   The optional EC05X5F3M (formally known as K-1504) short cable can be used to connect the ECM-680S stereo shotgun on camcorders with two 3-pin XLR inputs

Viser 31 til 35 (av 35 produkter)