Klotz RamCAT 6 SF/UTP ...

1.380,-

Klotz RC6EE flexible RamCAT6 network cable for use on the road with etherCON Cat.6a ruggedized Cat. 6 Outdoor, SF/UTP, AWG26/19 stranded suitable for dragchains (tested in endurance test) compression resistant construction due to a PE cross 10 GB Ethernet acc. to IEEE 802.3an extra-rugged PUR jacket ruggedized connector with Cat.6a component compliance intermateable with the existing etherCON Cat.5 range attention! does not intermate with the Cat.6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B The RC6EE is a flexible3 RamCAT6 cable designed for data transfer in mobile operation.  Developed for a frequency of 500 MHz, it is suitable for data transfer rates of up to 10 Gbit/s.  The RAMCAT6 is the cable of choice for data transfer in the Ethernet applications 1000BaseT and  10GBase-T where drag chains and cable drums are used. The RC6EE offers characteristic impedance of 100 Ω and has four twisted pairs with copper cores  (19 x 0.10 mm). The matched lay lengths of the individual pairs and the sophisticated cable  stranding with central PE cross are designed to maximize NEXT (near-end crosstalk) and FEXT  (far-end crosstalk) values. With cross-shaped PE central filler and abrasion-proof PUR jacket,  the cable is ideal for mobile use on the road. Dual shielding reliably protects against  electromagnetic interference. The RC6EE is made up with Neutrik etherCON connectors.  These RJ45 connectors with rugged metal housing are CAT6a-compliant and downward-compatible  with previous standards. The technically advanced CAT6 standard presents a particular challenge  for cable designers. It’s a challenge we were happy to tackle!

Klotz RamCAT 6 SF/UTP ...

1.820,-

Klotz RC6EE flexible RamCAT6 network cable for use on the road with etherCON Cat.6a ruggedized Cat. 6 Outdoor, SF/UTP, AWG26/19 stranded suitable for dragchains (tested in endurance test) compression resistant construction due to a PE cross 10 GB Ethernet acc. to IEEE 802.3an extra-rugged PUR jacket ruggedized connector with Cat.6a component compliance intermateable with the existing etherCON Cat.5 range attention! does not intermate with the Cat.6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B The RC6EE is a flexible3 RamCAT6 cable designed for data transfer in mobile operation.  Developed for a frequency of 500 MHz, it is suitable for data transfer rates of up to 10 Gbit/s.  The RAMCAT6 is the cable of choice for data transfer in the Ethernet applications 1000BaseT and  10GBase-T where drag chains and cable drums are used. The RC6EE offers characteristic impedance of 100 Ω and has four twisted pairs with copper cores  (19 x 0.10 mm). The matched lay lengths of the individual pairs and the sophisticated cable  stranding with central PE cross are designed to maximize NEXT (near-end crosstalk) and FEXT  (far-end crosstalk) values. With cross-shaped PE central filler and abrasion-proof PUR jacket,  the cable is ideal for mobile use on the road. Dual shielding reliably protects against  electromagnetic interference. The RC6EE is made up with Neutrik etherCON connectors.  These RJ45 connectors with rugged metal housing are CAT6a-compliant and downward-compatible  with previous standards. The technically advanced CAT6 standard presents a particular challenge  for cable designers. It’s a challenge we were happy to tackle!

Klotz RamCAT 6 SF/UTP ...

7.750,-

Klotz RC6EEW flexible RamCAT6 network cable drum system for use on the road with etherCON Cat.6a ruggedized Cat. 6 Outdoor, SF/UTP, AWG26/19 stranded suitable for dragchains (tested in endurance test) compression resistant construction due to a PE cross 10 GB Ethernet acc. to IEEE 802.3an extra-rugged PUR jacket ruggedized connector with Cat.6a component compliance intermateable with the existing etherCON Cat.5 range attention! does not intermate with the Cat.6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B The RC6EE is a flexible3 RamCAT6 cable designed for data transfer in mobile operation.  Developed for a frequency of 500 MHz, it is suitable for data transfer rates of up to 10 Gbit/s.  The RAMCAT6 is the cable of choice for data transfer in the Ethernet applications 1000BaseT and  10GBase-T where drag chains and cable drums are used. The RC6EE offers characteristic impedance of 100 Ω and has four twisted pairs with copper cores (19 x 0.10 mm).  The matched lay lengths of the individual pairs and the sophisticated cable stranding with central PE  cross are designed to maximize NEXT (near-end crosstalk) and FEXT (far-end crosstalk) values.  With cross-shaped PE central filler and abrasion-proof PUR jacket, the cable is ideal for mobile use on the road.  Dual shielding reliably protects against electromagnetic interference. The RC6EE is made up with  Neutrik etherCON connectors. These RJ45 connectors with rugged metal housing are CAT6a-compliant and  downward-compatible with previous standards. The technically advanced CAT6 standard presents a  particular challenge for cable designers. It’s a challenge we were happy to tackle!

Klotz RamCAT 6 SF/UTP ...

9.935,-

Klotz RC6EEW flexible RamCAT6 network cable drum system for use on the road with etherCON Cat.6a ruggedized Cat. 6 Outdoor, SF/UTP, AWG26/19 stranded suitable for dragchains (tested in endurance test) compression resistant construction due to a PE cross 10 GB Ethernet acc. to IEEE 802.3an extra-rugged PUR jacket ruggedized connector with Cat.6a component compliance intermateable with the existing etherCON Cat.5 range attention! does not intermate with the Cat.6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B The RC6EE is a flexible3 RamCAT6 cable designed for data transfer in mobile operation.  Developed for a frequency of 500 MHz, it is suitable for data transfer rates of up to 10 Gbit/s.  The RAMCAT6 is the cable of choice for data transfer in the Ethernet applications 1000BaseT and  10GBase-T where drag chains and cable drums are used. The RC6EE offers characteristic impedance of 100 Ω and has four twisted pairs with copper cores (19 x 0.10 mm).  The matched lay lengths of the individual pairs and the sophisticated cable stranding with central PE  cross are designed to maximize NEXT (near-end crosstalk) and FEXT (far-end crosstalk) values.  With cross-shaped PE central filler and abrasion-proof PUR jacket, the cable is ideal for mobile use on the road.  Dual shielding reliably protects against electromagnetic interference. The RC6EE is made up with  Neutrik etherCON connectors. These RJ45 connectors with rugged metal housing are CAT6a-compliant and  downward-compatible with previous standards. The technically advanced CAT6 standard presents a  particular challenge for cable designers. It’s a challenge we were happy to tackle!

Klotz Toslink digital 1 m ...

135,-

Klotz Toslink digital 1 m Fiberkabel Optisk ADAT

-21%

Klotz USB-AB1 USB kabel 1,5m ...

119,-

150,-

Klotz USB High Speed USB 2.0 A-B sort 1,5 m Tilbud gjelder kun antall på lager.   Høyhastighets og pålitelig - USB-kabler fra KLOTZ AIS overholder USB 2.0 høyhastighetsstandarden. Disse kablene er ideelle for å koble til bærbare enheter som harddisker eller lydkort. Veldig fleksibel gull-pletterte kontakter

Klotz USB-AB4 USB kabel 4m ...

240,-

Klotz USB High Speed A-B sort 4 meter.

Midas M32 CAT5e Connection ...

4.390,-

50 meter Cat5e kabel på rull. Midas Cat5e 50m drum Tour-Grade Ruggedised and Screened

Neutrik NAHDMI-W-B HDMI ...

285,-

Neutrik NAHDMI-W-B HDMI-gjennomføringsadapter, svart D-formet hus Neutriks HDMI-løsning for overføring av alle digitale TV- og PC-videoformater inkludert HD-video (HDTV) kan integreres i nettverk veldig enkelt.   HDMI feedthrough adapter, black D-shape housing Neutrik's HDMI solution for the transmission of any digital TV and PC video format including high-definition video (HDTV) can be integrated in networks very easy. Features & Benefits To transmit any digital TV and PC video format including high-definition video (HDTV) HDMI feedthrough adapter with 19 pole HDMI receptacle at both ends Dust and water resistant acc. to IP65 safety standard in combination with NKHDMI-* Universally accepted standard D-shape housing Removable screen to chassis grounding  

Procab PRX606 Trommel CAT6 - ...

3.830,-

The PRX606 is a HighFlex CAT6 U/UTP cable (BCT60U) assembled on a lightweight, extremely strong and impact resistant reel (CDM310). Both ends are terminated by male RJ45 connectors, allowing direct connection from transmitting to receiving end without any additional connections or patch cords. A connection tail of 5 meters (included in total reel length) is wounded to the front side cable winder. The connectors are fitted with removable connector boots, allowing assembly of Neutrik Ethercon connector shells (Neutrik NE8MC or NE8MC-B). The conductor section consists of 4 twisted pairs with stranded copper 24 AWG conductors with a polyethylene ‘+’ shaped separator in between.The combination with hard and solid inner jacket materials and soft outer jacket materials provides great flexibility with a solid touch even after numerous times of winding and unwinding. Supports 10Base-T, 100Base-TX, 1000Base-T and 10GBase-T gigabit.