AER AMP ONE Bassforsterker

23.650,-

Liten, kompakt men stor,stor lyd. AER "amp one"™ er en liten 200 watts basscombo spesielt designet for elektrisk bass. Som med alle andre AER forsterkere, finnes inget annet alternativ enn høyest mulige kvalitet. It seems like we have done it again … Over many years you have asked us for something small for electric bass – simple, powerful and with a performance hard to believe … And there it is: the AER Amp one. Based on a superb 10“ in a bass reflex enclosure, in combination with a serious 200 watt power amp, more than sufficient power-supply and extended dynamic headroom - Input 6.3 mm (1/4”) input jack socket as high impedance line input stage with pad (high/low attenution). Equalizer three band tone controls with middle parametric Colour ‘mid-cut-treble-boost’-filter Tone balance the tone balance enables the bass- or treble emphasis or a combination of both Effect compressor with ratio and threshold Power amp 200 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 10“ woofer neodymium magnet Features ground lift, headphones, line out, sub out, footswitch (muting and effect loop), send, return, insert pre/post EQ, aux in, adjustable DI-out Dimensions 325mm x 375 mm x 295 mm (12.80“ x 14.80“ x 11.60“), HxWxD Weight 13,50 kg (29.80 lbs)

AER AMP THREE Bassforsterker

27.215,-

Amp three follows the concept of Amp one: being small, rich and powerful based on a one way speaker-system. It also offers a superb mix between size and power and features for professional use. Equipped with 2 x 8“ heavy duty bass-speakers, it enhances the low mids and offers a more open, transparent tone with the neccessary strength and focus to cut through. Input 6.3 mm (1/4”) input jack socket as high impedance line input stage with pad  (high/low attenution) Equalizer three band tone controls with middle parametric Colour ‘mid-cut-treble-boost’-filter Bass boost +10 dB / 55 Hz Tone balance the tone balance enables the bass- or treble emphasis or a combination of both Effect compressor with ratio and threshold Power amp 200 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 2 x 8“ heavy-duty bass-speakers Features ground lift, headphone outputs, line out, sub out, footswitch (muting and effect loop), send, return, insert pre/post EQ, aux in, adjustable DI-out Dimensions 365 mm x 420 mm x 300 mm (14.40“ x 16.60“ x 11.80“), HxWxD Weight 16 kg (35,28 lbs)

AER AMP TWO Bassforsterker

28.990,-

Amp two is the second member of the Bottom Line combo bass amps.  In line with Amp one, but with a more defined speakersystem and more power. A 12“ neodymium woofer for quick and full bass response combined with a 4“ mid-high direct radiating speaker for gentle trebles allows a wider range of sounds from funk to pop and rock to jazz. As further difference to the Amp one the signal path is lead trough adjustable compression pre EQ to provide even more dynamic headroom. Input 6.3 mm (1/4”) input jack socket as high impedance line input stage with pad (high/low attenution). Equalizer three band tone controls with middle parametric Colour ‘mid-cut-treble-boost’-filter Bass boost +10 dB / 55 Hz Tone balance the tone balance enables the bass- or treble emphasis or a combination of both Effect compressor with ratio and threshold Power amp 240 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 12“ (300 mm) woofer neodymium alloy magnet 4“ (100 mm) mid-high direct-radiating 2-way speaker system Features headphones, line out pre/post master switchable, sub out, footswitch (muting and effect on/off), send, return, insert pre/post EQ, adjustable aux in, tuner, adjustable hf level, adjustable pre/post EQ DI-out, ground lift Dimensions 500mm x 420 mm x 350 mm (19.70“ x 16.60“ x 13.80“), HxWxD Weight 23,50 kg (51.70 lbs)

AER Basic Performer 2 ...

35.750,-

The Basic Performer 2 is a solution for Bass and instruments of the lower registers, based on the experience of multiplying well proven AER acoustic systems. Small twin-cone systems are fast, provide a superior coverage for the critical mid-range and have enough substance in the low end. The AER band-pass/bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. High-End preamps, proper filters and additional professional sound design make the Basic Performer a multitalented all-round solution. The sound characteristics are full range thus open and light yet breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments, e. g. harp, cello, accordion … Channel 1 6.3 mm (1/4”) jack socket as high impedance line input with switchable 9 V phantom power and high/low attenuator) Channel 2 combo socket XLR + 6.3 mm (1/4”) jack as high-impedance line- or balanced microphone input with switchable phantom power Equalizer three band tone controls for both channels Colour ‘mid-cut-treble-boost’-filter Effects compressor, notch filter Power amp 2 x 100 W / 8 ohms, dynamic control Analog signal processing subsonic filter, low distortion RMS limiter Speaker system 2 x 8” (200 mm) dual cone full-range speakers (front side) 2 x 8” (200 mm) woofers (inside) Dual-chamber bass reflex cabinet Features tape in, headphones, tuner, insert, line out, DI-out, send, return, footswitches (effect on/off, solo/ensemble, mute channels) Dimensions 490 mm x 360 mm x 405 mm (19.30“ x 14.2 “ x 15.90“), HxWxD Weight 23,00 kg (50.8 lbs)